PM75CLA060 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Intellimod™ L-Series Three Phase IGBT Inverter 75 Amperes/600 Volts P A E TERMINAL CODE D F G 1 VUPC L 2 UFO M H 3 UP J J J K 4 VUP1 K 5 VVPC K K 6 VFO 7 VP 8 VVP1 9 VWPC 10 WFO Y N 11 WP B 1 Y 5 9 12 VWP1 19 13 VNC P N W 14 VN1 15 NC V B U V 16 UN W 17 VN S 18 WN 19 FO Q AE R U AG (2 PLACES) U T U AC (2 PLACES) AB (6 PLACES) AF AD AA X Z C N W V VUPC OT IN UFO VUP1 Features: £ Complete Output Power Circuit £ Gate Drive Circuit £ Protection Logic – Short Circuit – Over Temperature Using On-chip Temperature Sensing – Under Voltage £ Low Loss Using 5th Generation IGBT Chip FO VCC UP GND GND IN FO VCC SI OUT OT GND GND IN FO VCC SI OUT OT GND GND IN FO VCC SI OUT IN NC GND GND OT VVPC VFO WP VWP1 VP VVP1 UN FO VCC SI OUT GND GND IN FO VCC SI OUT GND GND OT VN SI OUT WFO VWPC NC FO VNC WN VN1 U OT P Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R Inches 4.72 2.17 0.63 4.17 0.28 0.78 2.62 0.13 0.63 0.08 0.10 2.81 0.20 0.43 0.42 0.87 Millimeters 120.0 55.0 16.0 106.0 7.0 19.75 66.5 3.25 16.0 2.0 2.5 71.5 5.0 11.0 10.75 22.0 Dimensions S T U V W X Y Z AA AB AC AD AE AF AG Inches 0.46 0.59 0.91 0.57 1.26 1.22 0.69 1.14 0.51 M5 Metric 0.22 Dia. 0.28 0.08 0.02 Sq. 0.10 Dia. Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Millimeters 11.75 15.0 23.0 14.5 32.0 31.0 17.5 29.0 13.0 M5 Dia. 5.5 7.0 2.0 Sq. 0.5 Dia. 2.5 Applications: £ Inverters £ UPS £ Motion/Servo Control £ Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM75CLA060 is a 600V, 75 Ampere Intellimod™ Intelligent Power Module. Type Current Rating Amperes VCES Volts (x 10) PM 75 60 1 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM75CLA060 Intellimod™ L-Series Three Phase IGBT Inverter 75 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Power Device Junction Temperature Symbol PM75CLA060 Units Tj -20 to 150 °C Tstg -40 to 125 °C Mounting Torque, M5 Mounting Screws — 31 in-lb Mounting Torque, M5 Main Terminal Screws — 31 in-lb Storage Temperature Module Weight (Typical) — 380 Grams Supply Voltage, Surge (Applied between P - N) VCC(surge) 550 Volts Self-protection Supply Voltage Limit (Short Circuit protection Capability)* VCC(prot.) 400 Volts VISO 2500 Volts VCES 600 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current (TC = 25°C) ±IC 75 Amperes ±ICP 150 Amperes PC 300 Watts Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) VD 20 Volts Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-VNC) VCIN 20 Volts Fault Output Supply Voltage VFO 20 Volts IFO 20 mA Peak Collector Current (TC = 25°C) Collector Dissipation (TC = 25°C) Control Sector (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (UFO, VFO, WFO, FO Terminals) Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Emitter Cutoff Current ICES Diode Forward Voltage VEC VCE = VCES, VD = 15V, Tj = 25°C VCE = VCES, VD = 15V, Tj = 125°C -IC = 75A, VCIN = 15V, VD = 15V — — — — — 2.2 1.0 10 3.3 mA mA Volts VCE(sat) VD = 15V, VCIN = 0V, IC = 75A, — 1.6 2.1 Volts Tj = 25°C VD = 15V, VCIN = 0V, IC = 75A, Tj = 125°C — 1.5 2.0 Volts IGBT Inverter Sector Collector-Emitter Saturation Voltage Inductive Load Switching Times ton 0.5 1.0 2.4 µs trr VD = 15V, VCIN = 0 ⇔ 15V — 0.2 0.4 µs tC(on) VCC = 300V, IC = 75A — 0.4 1.0 µs toff Tj = 125°C — 1.2 2.5 µs — 0.5 1.0 µs tC(off) 2 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM75CLA060 Intellimod™ L-Series Three Phase IGBT Inverter 75 Amperes/600 Volts Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units SC toff(SC) -20°C ≤ Tj ≤ 125°C, VD = 15V VD = 15V 150 — 241 0.2 — — Amperes µs Over Temperature Protection (Detect Tj of IGBT Chip) OT OTR Trip Level Reset Level 135 — 145 125 155 — °C °C Supply Circuit Under-voltage Protection (-20 ≤ Tj ≤ 125°C) UV UVR Trip Level Reset Level 11.5 — 12.0 12.5 12.5 — Volts Volts ID — — 1.2 1.7 15 5 1.5 2.0 25 10 1.8 2.3 mA mA Volts Volts Control Sector Short Circuit Trip Level Short Circuit Current Delay Time Circuit Current Input ON Threshold Voltage Input OFF Threshold Voltage Vth(on) Vth(off) VD = 15V, VCIN = 15V, VN1-VNC VD = 15V, VCIN = 15V, VXP1-VXPC Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-VNC Fault Output Current* IFO(H) IFO(L) VD = 15V, VCIN = 15V VD = 15V, VCIN = 15V — — — 10 0.01 15 mA mA tFO VD = 15V 1.0 1.8 — ms Condition Min. Typ. Max. Units Rth(j-c)Q IGBT (Per 1/6 Module) (Note 1) — — 0.42 °C/Watt Rth(j-c)D FWDi (Per 1/6 Module) (Note 1) — — 0.69 °C/Watt Rth(j-c)Q IGBT (Per 1/6 Module) (Note 2) — — 0.32 °C/Watt Rth(j-c)D FWDi (Per 1/6 Module) (Note 2) — — 0.53 °C/Watt Case to Fin Per Module, — — 0.038 °C/Watt Value ≤400 15.0 ± 1.5 Units Volts Volts VCIN(on) VCIN(off) fPWM Condition Applied across P-N Terminals Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-VNC — ≤0.8 ≥9.0 ≤20 Volts Volts kHz tDEAD Input Signal ≥2.0 µs Fault Output Pulse Width* *Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower devide operate to protect it. Thermal Characteristics Characteristic Symbol Junction to Case Thermal Resistance Contact Thermal Resistance Rth(c-f) Thermal Grease Applied (Note 1) Recommended Conditions for Use Characteristic Supply Voltage Control Supply Voltage** Input ON Voltage Input OFF Voltage PWM Input Frequency Arm Shoot-through Blocking Time Symbol VCC VD ** With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak. Note 1:TC (Base Plate) Measurement Point Note 2: TC (Under the Chip) Measurement Point Y Arm TC MEASUREMENT POINT BOTTOM VIEW X TOP VIEW Axis UP VP WP UN VN WN IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi X 28.7 28.7 65.2 65.2 85.3 85.3 38.0 38.0 55.4 55.4 75.5 75.5 Y -6.6 0.85 -6.6 2.5 -6.6 2.5 4.6 -4.5 4.6 -4.5 4.6 -4.5 3 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM75CLA060 Intellimod™ L-Series Three Phase IGBT Inverter 75 Amperes/600 Volts 1.0 0.5 0 0 20 40 60 80 101 100 100 COLLECTOR-CURRENT, IC, (AMPERES) VD = 15V Tj = 25°C Tj = 125°C 0 0.5 102 10-1 VCC = 300V VD = 15V Tj = 25°C Tj = 125°C INDUCTIVE LOAD 10-1 101 102 101 100 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.42°C/W (IGBT) Rth(j-c) = 0.69°C/W (FWDi) 10-2 102 10-3 10-3 102 10-2 10-1 TIME, (s) 100 100 10-1 10-2 100 VCC = 300V VD = 15V Tj = 25°C Tj = 125°C 101 COLLECTOR CURRENT, IC, (AMPERES) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi) 10-1 COLLECTOR CURRENT, -IC, (AMPERES) 4 VCC = 300V VD = 15V Tj = 25°C Tj = 125°C 10-2 100 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) REVERSE RECOVERY SWITCHING LOSS, Err, (mJ/PULSE) 100 101 EMITTER CURRENT, IE, (AMPERES) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL) COLLECTOR CURRENT, IC, (AMPERES) REVERSE RECOVERY SWITCHING LOSS VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 101 100 100 101 100 EMITTER CURRENT, IE, (AMPERES) 10-2 100 2.5 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C 101 SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL) SWITCHING LOSS, ESW(on), (mJ/PULSE) REVERSE RECOVERY TIME, trr, (µs) 10-1 101 2.0 101 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C 10-2 100 1.5 102 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 100 1.0 SWITCHING LOSS, ESW(off), (mJ/PULSE) 1.5 REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 102 VD = 15V Tj = 25°C Tj = 125°C EMITTER CURRENT, IE, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 2.0 FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CURRENT, Irr, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 101 102