Testing Report

96FD25-S128-TR7
Test Report
Initiated by
River Lin
Approved by
Jackie Wang
Page 1 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Revision History:
Date
2014/07/06
Revision
V1.0
Description
The First version released.
Creator
River lin
Page 2 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Results Definition:
Criteria
PASS
Fail
Limitation
N/A
No Test
Definition
Test result pass and function work perfectly.
Test fail or can not meet the spec requirement.
There are no plans to fix this function.
Spec not support or driver not ready.
No test tool or device or FW not ready, please write reason to the “Remark”.
Page 3 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Results Summary:
Num.
Chapter 1
Test Item
Result
Function Test
1.01
HDD Function Test
PASS
1.02
SATA IDE Mode Test
PASS
1.03
SATA AHCI Mode Test
PASS
Chapter 2
Software Compatibility Test
2.01
Chapter 3
3.01
Chapter 3
Remark
OS and Driver Install Test
PASS
Hardware Compatibility Test
CPU Board Compatibility Test
PASS
System Reliability Test
4.01
Power On/Off Test
PASS
4.02
Warm Boot Stress Test
PASS
4.03
ACPI Cycling Burn-in Test
PASS
4.04
Full System, I/O Integrated Stress Test
PASS
Page 4 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Table of Contents
Revision History: .................................................................................................................................................. 2
Test Results Definition: ........................................................................................................................................ 3
Test Results Summary: ........................................................................................................................................ 4
Table of Contents .................................................................................................................................................... 5
Product Information: ........................................................................................................................................... 6
Platform Configuration: ......................................................................................................................................... 7
Test Programs: ................................................................................................................................................... 11
Test Equipments: ............................................................................................................................................... 12
1.01
HDD Function Test................................................................................................................................ 13
1.02
SATA IDE Mode Function Test ............................................................................................................ 14
1.03
SATA AHCI Mode Function Test......................................................................................................... 15
Chapter 2:Software Compatibility Test ............................................................................................................ 18
2.01
OS and Driver Install Test .................................................................................................................... 18
Chapter 3:Hardware Compatibility Test .......................................................................................................... 19
3.01
CPU Board Compatibility Test ............................................................................................................. 19
Chapter 4:System Reliability Test ..................................................................................................................... 20
4.01
Power On/Off Test................................................................................................................................. 20
4.02
Warm Boot Stress Test.......................................................................................................................... 21
4.03
ACPI Cycling Burn-in Test ................................................................................................................... 21
4.04
Full System, I/O Integrated Stress Test ................................................................................................ 22
Chapter 5:System Performance Test ................................................................................................................. 24
5.01
HDD Performance Test ......................................................................................................................... 24
Page 5 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Product Information:
Item.
Description.
Advantech Part Number
Manufacturer
Transcend
Model Number
TS128GSSD370
From Factory
2.5”
Interface
SATAIII
Capacity
128GB
Rotation Speed
SSD
Host Transfer Rate
6GB
Meab Time
(MTBF)
Between
Failure
1,500,000hours
Voltage Tolerance
+5.0V ± 5%
Operating Temperature
-10°C to 80°C
Firmware
20140402
Country of Origin
Taiwan
Dimension (LxWxH)
99.8mm x 69.8mm x7mm
RoHS Status (Yes/No)
Yes
Page 6 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Platform Configuration:
MIO-5290
Item.
Description.
Project Name.
MIO-5290
PCB Version.
A101-2
BIOS Version.
5290X015.
EC Code Version.
I1809X0100
CPU Model/Info
Intel i3-3217UE @ 1.70GHz
Memory Type/Info
DDR3 1333 2GB Apacer 78.A2GC9.4200C
Total Memory Size
8GB
PCH Chipset
QM77
Graphic Controller
VGA Function was supported intel PCH
Audio Codec
ALC892
LAN1 Controller
Intel® 82579LM
LAN2Controller
Intel®82583V
MIO-5271
Item.
Description.
Project Name.
MI0-5271
PCB Version.
A101-2
BIOS Version.
5271X017
EC Version
I2865X0101
CPU Model/Info
Intel® i5-4300 1.0GHz
Memory Type/Info/Size
DDR3L-1600 4GB Apacer 78.B2GCR.AF10C
PCH Chipset
Lynx Point-LP PCH QM87
Graphic Controller
GT3 Graphics, Generation 7.5 graphics core architecture
Audio Codec
ALC888S
LAN1 Controller
Intel i218
LAN2 Controller
Intal i210
SOM-5894
Item.
Description.
Page 7 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Project Name.
SOM-5894
PCB Version.
A101-2
BIOS Version.
5894X021
CPU Model/Info
Intel® i7-4770EQ 2.40GHz
Memory Type/Info/Size
DDR3 1333 2GB*2
PCH Chipset
Lynx Point
Graphic Controller
Intel® HD Graphics
Audio Codec
ALC888S
LAN1 Controller
Intel ® I217
AIMB-582W
Item.
Description.
M/B Name
AIMB-582WG2
PCB Version.
A101-2
BIOS Version.
W582J03
CPU Model/Info
Intel® E3 1275 3.5GHz
Memory Type/Info/Size
DDR3 1333G*2
PCH Chipset
C216
Graphic Controller
Intel ® HD Graphics
Audio Codec
ALC892
LAN1 Controller
Intel ® 82583V
LAN2 Controller
Intel ® 82579LM
AIMB-503L
Item.
Description.
Project Name.
AIMB-503
PCB Version.
A101-3
BIOS Version.
A503X009
CPU Model/Info
Intel® i5-4670S 3.1GHz
Memory Type/Info
DDR3 1333G*2
PCH Chipset
Intel H81 PCH
Graphic Controller
Intel HD Graphic
Page 8 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Audio Codec
ALC892
LAN1 Controller
Realtek 8111E
LAN2Controller
Realtek 8111E
AIMB-584
Item.
Description.
Project Name.
AIMB-584
PCB Version.
A101-1
BIOS Version.
A584X021
CPU Model/Info
Intel® i5-4670S 3.1GHz
Memory Type/Info
DDR3 1333G*2
PCH Chipset
Intel Q87 PCH
Graphic Controller
Intel HD Graphic
Audio Codec
ALC892
LAN1 Controller
Intel® I217
LAN2Controller
Intel® I211
AIMB-784
Item.
Description.
Project Name.
AIMB-784
PCB Version.
A101-3
BIOS Version.
A784X018
CPU Model/Info
Intel® i7-4770S 3.1GHz
Memory Type/Info
DDR3 1333G*2
PCH Chipset
Intel Q87 PCH
Graphic Controller
Intel HD Graphic
Audio Codec
ALC892
LAN1 Controller
Intel® I217
LAN2Controller
Intel® I211
PCE-5128
Item.
M/B Name
Description.
PCE-5128
Page 9 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
PCB Version.
A101-3
BIOS Version.
5128X202
Backplane Model.
PCE-5B06-03
Backplane Verson.
A101-2
CPU Model/Info
Intel® i7-4770S 3.1GHz
Memory Type/Info/Size
DDR3 1333G*2
PCH Chipset
Intel Q87 PCH
Graphic Controller
Intel HD Graphic
LAN1 Controller
Intel® I217
LAN2 Controller
Intel® I210
PCE-7128
Item.
Description.
M/B Name
PCE-7128
PCB Version.
A101-3
BIOS Version.
7128X210
Backplane Model.
PCE-5B06-03
Backplane Verson.
A101-2
CPU Model/Info
Intel® i7-4770S 3.1GHz
Memory Type/Info/Size
DDR3 1333G*2
PCH Chipset
Intel C226 PCH
Graphic Controller
Intel HD Graphic
LAN1 Controller
Intel® I217
LAN2 Controller
Intel® I211
Page 10 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Programs:
Test Program
Version
CrystalDiskMake
V3.0.3
ATTO Disk
V2.46
Anvil's Storage Utilities
1.1.0.337
AS SSD Benchmark
1.7.4739.38088
Passmark performance
V8.0 build1031
I/OMETTER
2004.07.30
PassMark Burn-In Test Pro
V7.1 build 1017
PassMark Rebooter
V1.3 build 1004
PassMark Sleeper
V2.3 build 1009
Power on/off
V3.3
Page 11 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Equipments:
Model
Description
Power on/off test equipment (ATX/AT)
Page 12 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 1:Function Test
1.01 HDD Function Test
1.01.01.01 Test Purpose:
The purpose of SATA test is to analyze and validate the functional、performance capabilities、quality
and stability.
1.01.01.02 Test Standard:
Please refer to the Project Hardware and BIOS specification.
1.01.01.03 Test Tool:
1. SATA cable
2. SATA HDD
3. SATA DVD-ROM
1.01.01.04 Test Criteria:
1. The BIOS must detect SATA devices information.
2. The SATA function can install OS and work well on OS without hang, restart, or blue screen or
any problems.
3. The Device Management can not have any exclamation point and question mark.
4. Mark sure pass w/program without any error ocurrs.
1.01.01.05 Test Procedure:
1.
2.
3.
4.
5.
Insert SATA HDD and DVD-ROM into the DUT
The BIOS detect SATA port HD correct information.
Install OS and all drivers.
SATA HDD can be copy/del/read/write file.
Install the PassMark BurnIn Pro program, and setting :
(a) Select tests to perform and their duty cycle: Select Disk(s) and Optical Drive(s)/ 100%
Loading/Auto Stop After : 30Minutes.
(b) Set test preferences: Select “Disk”-> Select Test this drive/ set File size: 15(% of disk), other
setting value keep defaults Preference.
(c) Then Press “Start selected tests” for test.
6. After finished testing, the test result will show on screen.
7. Change other port, and repeat 1~6.
1.01.01.06 Test Data:
Page 13 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Item
Description
Result
Post information
POST should show the correct model name
PASS
BIOS information
BIOS detect correct information
PASS
Device Manager
Device Management can not have any exclamation
point and question mark, and detect correct information
PASS
Install OS &driver
Can install OS and driver
PASS
SATA Port
Mark should all SATA port can detect and reboot
shutdown
PASS
BurnIn
Running passmark 30mins
PASS
1.02 SATA IDE Mode Function Test
1.03.01.01 Test Purpose:
The purpose of this test is to ensure the functional of the SATA IDE Mode.
Page 14 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
1.03.01.02 Test Standard:
Please refer to the Project Hardware and BIOS specification
1.03.01.03 Test Tools:
1. SATA HDD
2. SATA DVD-ROM
3. PassMark Burn In test Pro
1.03.01.04 Test Criteria:
1. The BIOS Setting IDE mode for DUT.
2. DUT must install OS and all drivers forIDE mode without any problems or error occurs.
1.03.01.05 Test Procedure:
1.
2.
3.
4.
Plug SATA HDD and DVD-ROM into DUT.
Setting IDE mode of SATA Mode on BIOS.
To install OS and drivers.
Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show
on screen.
5. Enter S1 mode, the system should be resume from S1 mode. This can work properly, and repeat
3times.
6. Enter S3 mode, the system should be resume from S3 mode. This can work properly, and repeat
3times.
7. Enter S4 mode, the system should be resume from S4 mode. This can work properly, and repeat
3times.
8. Enter Start-> shutdown on OS, then press power button turn on and boot into OS of DUT. This can
work properly, and repeat 3times.
9. Enter Start-> restart on OS, then boot into OS of DUT. This can work properly, and repeat 3times.
1.03.01.06 Test Data:
Test Item
SATA IDE Mode
Description
Result
Win7 Ultimate SP1_X86 Installation Test.
PASS
Win8.1 Pro_X86 Installation Test.
PASS
ACPI S4 Mode
PASS
OS shut dowm
PASS
Warm Boot Test.
PASS
1.03 SATA AHCI Mode Function Test
1.03.01.07 Test Purpose:
The purpose of this test is to ensure the functional of the SATA AHCI Mode.
Page 15 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
1.03.01.08 Test Standard:
Please refer to the Project Hardware and BIOS specification
1.03.01.09 Test Tools:
4. SATA HDD
5. SATA DVD-ROM
6. PassMark Burn In test Pro
7. Intel F6 Install Floppy Driver or AHCI driver on USB flash disk.
1.03.01.10 Test Criteria:
3. The BIOS Setting AHCI mode for DUT.
4. DUT must install OS and all drivers for AHCI mode without any problems or error occurs.
1.03.01.11 Test Procedure:
10. Plug SATA HDD and DVD-ROM into DUT.
11. Setting AHCI mode of SATA Mode on BIOS.
12. To install OS and drivers, during install process, need to upload AHCI driver from Floppy or USB
flash disk.
13. Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show
on screen.
14. Enter S1 mode, the system should be resume from S1 mode. This can work properly, and repeat
3times.
15. Enter S3 mode, the system should be resume from S3 mode. This can work properly, and repeat
3times.
16. Enter S4 mode, the system should be resume from S4 mode. This can work properly, and repeat
3times.
17. Enter Start-> shutdown on OS, then press power button turn on and boot into OS of DUT. This can
work properly, and repeat 3times.
18. Enter Start-> restart on OS, then boot into OS of DUT. This can work properly, and repeat 3times.
19. Setting Enabled Hot Plug SATA Port on BIOS.
20. The DUT SATA should be Hot Plug and work properly, and repeat 3times.
1.03.01.12 Test Data:
Test Item
SATA AHCI Mode
Description
Result
Win7 Ultimate SP1_X64 Installation Test.
PASS
Win8.1 Pro_X64 Installation Test.
PASS
ACPI S4 Mode
PASS
OS shut dowm
PASS
Warm Boot Test.
PASS
Page 16 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
PASS
Hot Plug
Page 17 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 2:Software Compatibility Test
2.01 OS and Driver Install Test
2.01.01.01 Test Purpose:
The purpose of this test is to ensure the OS compatibility of the DUT.
2.01.01.02 Test Standard:
Please refer to the Project Hardware and BIOS specification
2.01.01.03 Test Tools:
1. Microsoft OS installation DVD depends on X86/X64.
2.01.01.04 Test Criteria:
1. The OS X86/X64 installation process must complete without any error occurs.
2. The Server OS X86/X64 installation process must complete without any error occurs.
3. Device Management can not have any exclamation point and question mark.
2.01.01.05 Test Procedure:
1. Plug OS DVD or Server OS into DVD-ROM, and start install follow installation process.
2. After finish OS install, install all drivers for the DUT.
3. Make sure drivers of the DUT can install, and device management can not have any unknown
device.
2.01.01.06 Test Data:
Test Item
Win7 Ultimate SP1 x86
Win7 Ultimate SP1 x64
Win8.1 Pro x86
Win8.1 Pro x64
Description
Result
OS Installation – English.
PASS
Driver Installation.
PASS
Device Management Check.
PASS
OS Installation – English.
PASS
Driver Installation.
PASS
Device Management Check.
PASS
OS Installation – English.
PASS
Driver Installation.
PASS
Device Management Check.
PASS
OS Installation – English.
PASS
Driver Installation.
PASS
Device Management Check.
PASS
Page 18 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remake
Chapter 3:Hardware Compatibility Test
3.01
CPU Board Compatibility Test
3.01.01.01 Test Purpose:
The purpose of this test is to validate and ensure the CPU Board compatibility of the DUT.
3.01.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification.
3.01.01.03 Test Tools:
1. Different Chipsets of CPU Board
3.01.01.04 Test Criteria:
1. With a different CPU board connected. The DUT must PASS without any error occurs.
2. BIOS must detect current information
3. Device Management can not have any exclamation point and question mark.
3.01.01.05 Test Procedure:
1. Connect to CPU board and power on.
2. The system should be detected HDD, then install OS and drivers for this.
3. Confirm the all kinds of CPU board should work properly.
3.01.01.06 Test Data:
Test Item
CPU board
Description
BIOS version PCB Version
Result
Remark
OS install
MIO-5290
5290X015
A101-2
Win7/Win8.1
PASS
MIO-5271
5271X017
A101-2
Win7/Win8.1
PASS
SOm-5894
5894X021
A101-3
Win7/Win8.1
PASS
AIMB-582W
W582XJ03
A101-2
Win7/Win8.1
PASS
AIMB-503L
A503X009
A101-3
Win7/Win8.1
PASS
AIMB-584
A584X021
A101-1
Win7/Win8.1
PASS
AIMB-784
A784X018
A101-3
Win7/Win8.1
PASS
PCE-5128
5128X202
A101-3
Win7/Win8.1
PASS
PCE-7128
7128X201
A101-3
Win7/Win8.1
PASS
Page 19 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 4:System Reliability Test
4.01
Power On/Off Test
4.01.01.01 Test Purpose:
The purpose of this test is to examine and validate the stability of the Power On/Off and AT mode
under Widows OS.
4.01.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification
4.01.01.03 Test Tools:
1. Power on/off test equipment.
2. Power on/off Program
4.01.01.04 Test Criteria:
1. The test msut PASS the Power on / off circling test >= 100 times, booting rate=100%
2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any
problems.
3. The system must have no any error w/ Program.
4.01.01.05 Test Procedure:
1.
2.
3.
4.
Connect Power on/off test equipment to DUT for Power on/off test
Make sure PSON1 or HW Jumper set as ATX Mode.
Make sure BIOS item: After AC power Failure MUST set as "Always Off".
Install and execute Power on/off Program, and setting Timer :hr/min/sec on DUT.
5. Setup testing time, and change to zero of run number on Power on/off test equipment.
6. Start power on/off test and pass over100 times.
7. Make sure PSON1 or HW Jumper set as AT Mode
8. Repeat 4~5 and start power on/off test for AT mode and pass over 100 times.
4.01.01.06 Test Data:
Test Item
Description
Result
Power On/Off test
(ATX mode)
1. BIOS item: After AC power Failure set as "Always
Off"
2. H/W jumper set as ATX mode
3. Test at room temperature for 1000 duration cycles
3. Booting rate =100%
PASS
Power On/Off test
(AT mode)
1. BIOS item: After AC Power Failure set as "Always
Off".
2. H/W jumper set as AT mode
3. Test at room temperature for 1000 duration cycles
4. Booting rate =100%
PASS
Page 20 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
4.02 Warm Boot Stress Test
4.02.01.01 Test Purpose:
The purpose of this test is to analyze and validate the functional、performance capabilities、quality and
stability of DUT warm boot capability.
4.02.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification
4.02.01.03 Test Tools:
1. PassMark Rebooter
4.02.01.04 Test Criteria:
1. The test msut PASS the Reboot circling test >= 100 times, booting rate=100%
2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any
problems.
3. The system must have no any error w/ Program.
4.02.01.05 Test Procedure:
1. Install PassMark Rebooter program.
2. Executing program, and setting
(a) Maxiimum reboots 100 cycles.
(b) Delay Time Out setting before each reboot: 20~25 sec.
(c) Enabled Auto load Rebooter at startup.
3. Then start test Cycle.
4.02.01.06 Test Data:
Test Item
Description
1.Run PassMark Rebooter V1.3 Build1004
Windows 7 Ultimate SP1 2. Must PASS for 100 duration cycles.
X64
3.Time Out Before reboot:10-25secs
4. Booting rate =100%
Result
Remark
PASS
4.03 ACPI Cycling Burn-in Test
4.03.01.01 Test Purpose:
The purpose of this test is to examine and validate the quality and stability of the DUT ACPI
capability.
4.03.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification
4.03.01.03 Test Tools:
1. PassMark Sleeper V2.3 Build1009
4.03.01.04 Test Criteria:
Page 21 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
1. The ACPI function test msut PASS run 100 times
2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any
other problems.
4.03.01.05 Test Procedure:
1. Install PassMark Sleeper on the DUT.
2. Setup ACPI support mode.
3. Press Configuration-> Cycles Settings-> Cycle forever, then press ok.
4. Press Sleeper Now and start test 100 times.
4.03.01.06 Test Data:
Test Item
Windows 7 Ultimate
SP1 X64
Description
1. Run PassMark Sleeper V2.3 build 1009.
2. Select "all supported states". (S4)
3. Run for 100 times. The DUT MUST maintain a stable
condition after the test has been completed.
Result
Remark
PASS
4.04 Full System, I/O Integrated Stress Test
4.04.01.01 Test Purpose:
The purpose of this test is to examine and validate the quality and stability all IO of the DUT.
4.04.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification
4.04.01.03 Test Tools:
1. PassMark BurnIn Pro
4.04.01.04 Test Criteria:
1. The Full loading test msut PASS run over 12hours
2. The DUT must maintain a stable condition without any system crash, hang, blue screen, restart or
any other problems.
3. The system must have no any error w/ PassMark BurnIn Pro Program.
4.04.01.05 Test Procedure:
1. Insert tool into all of IO port on DUT.
2. Install PassMark BurnIn Pro program.
3. Executing BurnIn test, and setting :
(a) Select tests toperform and their duty cycle: Setp Auto Stop “720” Minutes, select need to test
items
(b) Set test preferences: setup need to setting items.
(c) All setting finish, press “Start selected tests” for test.
4. The DUT run program over 12hours.
4.04.01.06 Test Data:
Page 22 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
I/O Integrated Stress Test: Windows 7 Ultimate SP1 X64
Test Item
Description
Result
CPU
100% Loading
PASS
RAM
100% Loading
PASS
VIDEO
100% Loading
PASS
2D Graphics
100% Loading
PASS
3D Graphics
100% Loading
PASS
SATA1
SATA HDD Seagate ST3250312AS File system:
NTFS
PASS
SATA2
SATA HDD Transcend TS128GSSD370 File system:
NTFS
PASS
Page 23 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
Chapter 5:System Performance Test
5.01 HDD Performance Test
5.01.01.01 Test Purpose:
The purpose of this test is to ensure the HDD performance of the DUT.
5.01.01.02 Test Standard:
Please refer to the Project Hardware specification and BIOS specification.
5.01.01.03 Test Tools:
1. CrystalDiskMark
2. ATTO Disk Benchmark
3. AS SSD Benchmark
4. Anvil's Storage Utilities
5. Passmark performance
6. I/OMETTER
5.01.01.04 Test Criteria:
1. Executing the Benchmark Test default item of CrystalDiskMark
2. Executing the Benchmark Test of AS AUTO Disk Benchmark
3. Executing the Benchmark Test of AS SSD Benchmark
4. Executing the Benchmark Test SSD Benchmark of Anvil's Storage Utilities
5. Executing the Benchmark Test Disk of Passmark performance
6. Executing the Benchmark Test Disk of I/O Meter
5.01.01.05 Test Procedure:
1. Install and execute CrystalDiskMark, setting “need to test HDD” and press “All” start test.
2. Install and execute ATTO Disk Benchmark, setting Drive “need to test HDD” and press “Start”
for test.
3. Install and execute AS SSD Benchmark, setting “need to test HDD” and press “Start” for test.
4. Install and execute Anvil's Storage Utilities, setting SSD Benchmark and “need to test HDD” then
start test.
5. Install and execute Passmark performance, setting Disk and “need to test HDD” then pres”All”
start test.
6. Install and execute of I/O Meter, setting PHYSICAL Drive and Disker Worker, then start test.
7. Install and execute of I/O Meter, setting need to test Disk and Disker Worker, then start test.
8. Record all of test results.
5.01.01.06 Test Data:
Page 24 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
HDD Performance (OS:Win7 Ultimate SP1 X64)
Test Item and Comment /
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128
529.5
513
548.6
530.4
528.2
158.6
157.2
156.6
158
157.2
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128
ATTO
Read (MB/s) 561.189 561.189 561.189 563.151 560.213 560.213 559.24
Disk
Benchmark Write (MB/s) 157.68 157.207 157.601 157.638 159.843 157.918 159.116
559.24
560.213
Software
(unit)
MIO
-5290
MIO
-5271
SOM
-5894
AIMB AIMB
-582W -503
501.6
517
527.7
520.2
158.5
157.1
157.3
159.1
Remark
Max Read
CrystalDisk
Mark
Seq Read
(MB/s)
Max Write
Seq Read
(MB/s)
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
MIO
-5290
MIO
-5271
SOM
-5894
AIMB AIMB
-582W -503
Remark
157.671 156.784
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
MIO
-5290
MIO
-5271
SOM
-5894
AIMB
-582W
AIMB
-503
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128
Read
(MB/s)
494.89
496.58
496.1
511.23
495.52
495.56
491.25
510.79
490.84
AS SSD
Write
Benchmark (MB/s)
149.8
148.95 149.29
148.67
149.38
148.41
148.17
149.07
148.06
718
727
727
709
754
709
AIMB
-503
AIMB
-584
AIMB
-784
PCE
-5128
Software
Score
674
751
700
Remark
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
Anyil’s
Storage
Utilities
Read
(MB/s)
MIO
-5290
1506
MIO
-5271
SOM
-5894
AIMB
-582W
PCE
-7128 Remark
1577.39 1500.92 1582.52 1545.45 1551.68 1537.91 1541.13 1536.38
Write
(MB/s)
1310.05 1455.41 1366.42 1311.42 1389.03 1330.08 1307.84 1402.54 1422.8
Totaal
2816.05 3032.79 2867.34 2893.64 2934.64 2881.76 2845.75 2943.67 2959.19
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
MIO
-5290
MIO
-5271
SOM
-5894
AIMB AIMB
-582W -503
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128
Page 25 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Remark
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
PassMark
DiskMark
Performance
MIO
-5290
MIO
-5271
SOM
-5894
2946
2891
3045
AIMB AIMB
-582W -503
3016
2863
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128
2820
2883
2930
2993
AIMB
-584
AIMB
-784
PCE
-5128
PCE
-7128 Remark
Remark
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
MIO
-5290
MIO
-5271
SOM
-5894
AIMB
-582W
AIMB
-503
Total I/O
15310.8 39407.34 30073.01 20617.72 28009.63 32003.37 26424.97 33778.65 23939.72
per
Second
Total I/O
MBs
Second
59.8
153.93
117.47
80.54
109.41
125.01
103.22
131.95
93.51
0.0251
0.0331
0.0481
0.0355
0.0311
0.0376
0.0294
0.0414
Maximum
I/O
8.2987 28.7852 2.7207
Response
Time(ms)
0.1935
0.6017
0.5885
1.1411
0.1372
0.2568
I/O
METER Average
(Physical) I/O
0.0648
Response
Time(ms)
HDD Performance (OS: Win7 Ultimate SP1 X64)
Test Item and
Software
MIO
-5290
MIO
-5271
SOM
-5894
AIMB
-582W
AIMB
-503
AIMB
-584
AIMB
-784
PCE
-5128
PCE
Remark
-7128
Total I/O
11842.68 34665.31 24730.71 15102.03 29558.91 25005.61 22883.92 33500.70 23778.90
per Second
Total I/O
MBs
Second
46.26
135.41
96.60
58.99
115.46
97.68
89.39
130.86
92.89
I/O
Average
METER I/O
(Logical) Response
Time(ms)
0.084
0.0286
0.0402
0.0649
0.0337
0.0397
0.0434
0.0296
0.0417
Maximum
I/O
Response
Time(ms)
0.7575
0.4721
0.5169
0.3563
0.6177
1.8201
0.8036
0.1954
0.1505
Page 26 of 26
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.