SPECIFICATION FOR APPROVAL REF. : SF0502□□□YL□-□□□ ABC'S DWG NO. PROD. SMD Line Filter NAME REV. 20140207-C PAGE 1 Ⅰ﹒Configuration and dimensions： A B 101 C ( Plated Dimensions ) Unit：m/m ref. 3.5 0.8 5.0 F 1.8 I E 4 1.4 2 F 1 1.8 ( PCB Pattern ) G H G D 1.35 3 1.35 Unit：m/m A B C D E F G H I 5.00 ±0.3 5.00 ±0.3 2.50 max. 0.80 typ. 1.00 typ. 2.30 typ. 1.60 ref. 0.80 ref. 1.00 ref. Ⅱ﹒Schematic diagram： N1 1 2 4 3 N2 Ⅲ﹒Description： a﹒Ferrite toroid core construction. b﹒Magnetically shielded. c﹒Enamelled copper wire：H class d﹒Product weight：0.20g（ref.） Peak Temp：260℃ max. Max. Peak Temp - 5℃：30sec max. Max time above 217℃ ：60sec~150sec max. e﹒Moisture sensitivity Level 1 Temperature Rising Area f﹒Products comply with RoHS' requirements Preheat Area +4.0℃ / sec max. g﹒Halogen Free available 150 ~ 200℃ / 60 ~ 120sec Reflow Area Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅳ﹒General specification： a﹒Storage temp.：-40℃ ----+125℃ b﹒Operating temp.：-40℃----+125℃ Temperature ( ℃ ) 217℃ 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 （Temp. rise included） c﹒Resistance to solder heat：260℃.10 secs. AR-001C 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF. : SF0502□□□YL□-□□□ ABC'S DWG NO. PROD. SMD Line Filter NAME REV. 20140207-C PAGE 2 Ⅴ﹒ Electrical characteristics： DWG No. Common mode impedance Inductance (uH) (at 100MHz) (KΩ) ref. IDC (A) RDC (max.) (mΩ) Impedance (KΩ) Freq. range (MHz) SF0502101YL□-□□□ 0.10 ±35% 0.23 6.0 15.0 0.06 min. 90 ~ 900 SF0502251YL□-□□□ 0.25 ±35% 0.55 5.0 20.0 0.12 min. 80 ~ 700 SF0502501YL□-□□□ 0.50 ±35% 1.10 4.0 30.0 0.20 min. 60 ~ 300 SF0502102YL□-□□□ 1.00 ±35% 2.50 2.0 45.0 0.40 min. 50 ~ 200 SF0502142YL□-□□□ 1.40 ±35% 2.60 1.5 55.0 0.45 min. 40 ~ 160 1). 2). "- ：Packaging information： □□□ "：Reference code Code 3). Electrical specifications at 25℃ 4). Inductance Test Condition.：100KHz / 0.1V 5). Rated voltage 50 Vdc 6). Withstand Voltage 125Vdc 7). Insulation Resistance 10MΩ min. 8). IDC base on Temp. rise 40℃ typ. AR-001C SPECIFICATION FOR APPROVAL REF. : PROD. ABC'S DWG NO. SMD Line Filter REV. NAME SF0502□□□YL□-□□□ PAGE 20140207-C Ⅵ﹒ Curve： SF0502101YLB Common model △T@25℃ Differential Model 1000.00 70.0 60.0 50.0 40.0 △ T(℃ ) Impedance(Ω) 100.00 10.00 30.0 20.0 1.00 10.0 0.0 0.0 0.10 1 10 Freq(MHz) 100 2.0 4.0 6.0 8.0 10.0 IDC(A) 1000 SF0502501YLB Common model △T@25℃ Differential 10000.00 70.0 60.0 1000.00 Impedance(Ω) 50.0 100.00 △ T(℃ ) 40.0 30.0 10.00 20.0 1.00 10.0 0.0 0.0 0.10 1 10 Freq(MHz) 100 1.0 2.0 1000 3.0 IDC(A) 4.0 5.0 6.0 SF0502102YLB Common model △T@25℃ Differential Model 10000.00 60.0 50.0 1000.00 Impedance(Ω) 40.0 △ T(℃ ) 100.00 10.00 30.0 20.0 10.0 1.00 0.0 0.0 0.10 1 10 Freq(MHz) 100 0.5 1.0 1000 1.5 2.0 IDC(A) 2.5 3.0 3.5 2.5 3.0 3.5 SF0502142YLB Common model △T@25℃ Differential Model 10000.00 80.0 70.0 1000.00 Impedance(Ω) 60.0 50.0 △ T(℃ ) 100.00 10.00 40.0 30.0 20.0 1.00 10.0 0.0 0.0 0.10 1 AR-001C 10 Freq(MHz) 100 1000 0.5 1.0 1.5 2.0 IDC(A) 3 SPECIFICATION FOR APPROVAL REF. : SF0502□□□YL□-□□□ ABC'S DWG NO. PROD. SMD Line Filter NAME REV. PAGE 20140207-C 4 Ⅶ﹒Packaging information： ( 1 ) Configuration T Cover Tape A B N 2.0±0.5 D ∮C ∮C G P:8 m/m Embossed carrier 4 m/m End Start 101 101 101 101 101 101 101 Trailer no component 400 m/m min. Leader no component 200 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 12 330 B 21±0.8 C D 13±0.5 12 G 14 +0 N 50 -0 T 18.4 ( 3 ) Q'TY & G.W. Per package Outer : Carton Inner : Reel Code B AR-001C Q'TY (pcs) G.W. (gw) 3,000 1,000 Style 13 - 12 Q'TY (pcs) G.W. (Kg) Size (cm) 24,000 8.0 38 x 37 x 22 SPECIFICATION FOR APPROVAL REF. : PROD. ABC'S DWG NO. SMD Line Filter NAME REV. SF0502□□□YL□-□□□ 20140207-C PAGE 5 Ⅷ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.Exeternal Visual MIL-STD-883 Method 2009 constructions, marking and 6.Physical Dimensions JESD22 Method JB-100 Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Impedance shall not change more than ±35%. 8.Vibration Test MIL-STD-202 Method 204 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 1.Highest temperature：260±5℃. 2.Time（temp.≧ 217℃）：60~150 Second. 3.IR reflow times：3 times. 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Impedance shall not change more than ±35%. 1.No mechanical and electrical damage. Apply double as rated current for 5 minutes. (It's not application to some special design) 2.Impedance shall not change more than ±35%. 13.Solderability Test J-STD-002 1.Baking in pre-testing： 155±5℃ / 16Hours±30 min. 2.Peak temperature：240±5℃ 3.Time（temp.≧217℃）：60~150 second. 4.IR reflow times：1 times. 14.Electrical Characteriazation User Spec. 1.Operating temperature：-40℃~125℃ 2.Room temperature：25℃. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DC:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C The terminal shall be at least 95% covered with fresh solder. 1.No mechanical and electrical damage. 2.Impedance shall not change more than ±35%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Impedance shall not change more than ±35%. After test, inductors shall be no mechanical damage.