Surface Mount Quartz Crystal Oscillator LGF Series and PGF Series Description: 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Features: The Connor-Winfield's LGFxxx Series and PGFxxx 13 PG 29 155.5 F442 Series are 5.0x7.0 mm Surface 2 MH Z Mount, LVDS or LVPECL, Fixed Frequency Crystal Controlled Oscillators (XO) designed for applications requiring high frequency and tight frequency stability, wide temperature range and low jitter. Operating at 2.5 or 3.3 Vdc supply voltage, the LGFxxx Series provides LVDS output logic and the PGFxxx Series provides LVPECL output logic both with differential outputs. Enable / disable function is available on pad 1 or 2. The surface mount package is designed for high-density mounting and is optimum for mass production. Frequency Range 10 MHz to 1.5 GHz 3.3 or 2.5 Vdc Operation 5x7 mm SMT Package Frequency Stabilities Available: ±20 ppm, ±25 ppm, ±50 ppm or ±100 ppm Temperature Ranges Available: 0 to 70°C, -40 to 85°C, 0 to 85°C or -20 to 70°C Jitter: <1.5 ps RMS LGF Series: Differential LVDS Outputs PGF Series: Differential LVPECL Outputs Tri-State Enable/Disable on Pad 1 or 2 Tape and Reel Packaging RoHS Compliant / Lead Free Factory Programed Output Frequency Fast Delivery of any Output Frequency Package Outline Suggested Pad Layout 0.200 (5.08mm) 0.275 (7.0mm) 0.197 (5.0mm) 0.100 (2.54mm) C Bypass 1329 PGF442 155.52 MHZ Ground 0.079 (2.00mm) 0.165 (4.20mm) Top View 1 0.069 Ground Keep Out Area (1.75mm) 0.070 (1.80mm) Keep Out Area: Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane. Pad Connections Pad Connections Models LGFxx2, LGFxx3, PGFxx2, PGFxx3 1: Enable / Disable (OE) 2: N/C 3 Ground: 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Models LGFxx4, PGFxx5, LGFxx4, PGFxx5 1: N/C 2: Enable / Disable (OE) 3 Ground: 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Ordering Information PGF Bulletin Page Revision Date Ec281 1 of 4 03 06 Dec 2013 4 4 2 -155.52M Oscillator Type Temperature Range Frequency Tolerance Supply Voltage E/D Function Output Frequency LGF = LVDS PGF = LVPECL Clock Series 5x7 mm 1 = 0 to 70°C 2 = -40 to 85°C 3 = 0 to 85°C 4 = -20 to 70°C 4 = ±20 ppm 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm 2 = 2.5 Vdc, E/D Pad 1 3 = 3.3 Vdc, E/D Pad 1 4 = 2.5 Vdc, E/D Pad 2 5 = 3.3 Vdc, E/D Pad 2 Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max* *Amount of numbers after the decimal point. M = MHz G = GHz Part Number Examples : PGF442-155.52M = 5x7 mm package, ±20 ppm, -20 to 70°C, 2.5 Vdc, LVPECL Output, E/D Pad 1, Output Frequency 155.52 MHz' PGF123-311.04M = 5x7 mm package, ±50 ppm, 0 to 70°C, 3.3 Vdc, LVPECL Output, E/D Pad 1, Output Frequency 311.04 MHz LGF214-622.08M = 5x7 mm package, ±25 ppm, -40 to 85°C, 2.5 Vdc, LVDS Output, E/D Pad 2, Output Frequency 622.08 MHz LGF325-074.25M = 5x7 mm package, ±50 ppm, 0 to 85°C, 2.5 Vdc, LVDS Output, E/D Pad 2, Output Frequency 74.25 MHz Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Input Voltage Minimum -55 -0.5 -0.5 Nominal - - - Maximum Units 125 4.2 Vcc+0.5 °C Vdc Vdc Notes Absolute Ratings: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only. The functional operation of the device at those or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to conditions outside the "recommended operating conditions" for any extended period of time may adversely impact device reliability and result in failures not covered by warranty. Model Series LGFxxx Series PGFxxx Series L VDS Output Series L VPECL Output Series Operating Specifications Parameter Minimum Center Frequency: (Fo) 10 Operating Temperature Range: (See Ordering Information) Temperature Code 1 0 Temperature Code 2 -40 Temperature Code 3 0 Temperature Code 4 -20 Total Frequency Tolerance: (See Ordering Information) Tolerance Code 4 -20.0 Tolerance Code 1 -25.0 Tolerance Code 2 -50.0 Tolerance Code 3 -100.0 Supply Voltage: (Vcc) Supply Voltage Code 2 or 4 2.375 Supply Voltage Code 3 or 5 3.135 Supply Current - Start-Up Time: - Nominal Maximum Units - - - - 70 85 85 70 °C °C °C °C - - - - 20.0 25.0 50.0 100.0 ppm ppm ppm ppm 1 1 1 1 2.5 3.3 30 - 2.625 3.465 50 10 Vdc Vdc mA ms ±5% ±5% Nominal Maximum Units Notes 3.0 1.1 5.0 1.5 ps RMS ps RMS -55 -82 -106 -110 -111 -132 -145 - - - - - - - dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz Maximum Units Notes - 30% Vcc Vdc Vdc 2 200 50 ns ns - 1500 MHz Notes Jitter / Phase Noise Characteristics Parameter Jitter Minimum Period Jitter - Integrated Phase Jitter (BW = 12 KHz to 20 MHz) - SSB Phase Noise for Fo = 320.6296 MHz @ 10 Hz offset @ 100 Hz offset @ 1 KHz offset @ 10 KHz offset @ 100 KHz offset @ 1 MHz offset @ 10 MHz offset - - - - - - - OE Input Characteristics Parameter Minimum Nominal Enable / Disable Function Option: Models LGFxx2, LGFxx3, PGFxx2, PGFxx3 - OE Pad 1, N/C Pad 2 Models LGFxx4, LGFxx5, PGFxx4, PGFxx5 - OE Pad 2, N/C Pad 1 Enable Voltage (VIH) 70% Vcc - Disable Voltage (VIL) - - Enable Time - - Disable Time - - Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Ec281 2 of 4 03 06 Dec 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Enable / Disable Function Function: (Pad 1 or 2) Low or Open: High Output Disabled (High Impedance) Enabled LVDS Output Characteristics Parameter Load Output Differential Voltage (Vod) Output Swing (Differential Output Pk to Pk) Duty Cycle at 50% of output voltage swing Differential Rise / Fall Time: - Minimum - 250 500 45 - Nominal 100 - 700 50 0.15 Maximum Units - 450 900 55 0.35 Ohm mV mV % ns Notes 3 4 5 LVPECL Output Characteristics Parameter Load Output Voltage: Vcc = 2.5 Vdc High (VOH) Low (VOL) Output Voltage: Vcc = 3.3 Vdc High (VOH) Low (VOL) Duty Cycle at 50% of output voltage swing Rise / Fall Time: 20% to 80% Minimum Nominal Maximum Units 1.475 - - - - 0.880 V V 2.275 - 45 - - - 50 200 - 1.680 55 350 V V % ps - 50 - pF Notes 6 4 Package Characteristics Package Hermetically sealed ceramic package and metal cover Environmental Characteristics Vibration: Shock: Soldering Process; Vibration per Mil Std 883E Method 2007.3 Test Condition A. Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant lead free. See soldering profile on page 4. Phase Noise Plot Typical Phase Noise Plot Model PGF123-320.6296M Notes: 1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. 2. When the oscillator is disabled the outputs go to tri-state level (high impedance) which floats to VOL. Outputs are enabled with no connection on E/D pad. 3. Vod is measured with a 100 ohm resistor between the true and the complementary outputs. 4. Duty cycle measured at 50% of output voltage swing. 5. Rise and fall times measured from 10% to 90% 6. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Ec281 3 of 4 03 06 Dec 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com LVDS Test Circuit LVDS Output Waveform Vcc Power Supply Duty Cycle Q Q Ground 0.1 uF 100 Ohm 10 nF Vod Vod Q Q Differential Output Waveform peak-to-peak OE or N/C Vopp 0V 80% 0V 0V 20% tr LVPECL Test Circuit tf LVPECL Output Waveform R3 Duty Cycle 0.1 uF 1 2 3 Q R4 6 5 4 10 nF 80% 50% R1 OE or N/C 20% Q R2 Vcc = Vcc2 Vcc 2.5V 3.3V R1 / R3 250 Ohms 130 Ohms R2 /R4 62.5Ohms 82 Ohms tr tf RoHS Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Tape and Reel Dimensions Direction of Feed (Customer) 16mm Tape Revision History Revision 00 Revision 01 Revision 02 Revision 03 Data sheet released 07/09/13 Corrected supply voltage code, page 2. 07/10/13. Added LVDS models to the data sheet 08/23/13. Updated phase noise. 12/06/13. Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Ec281 4 of 4 03 06 Dec 2013