Surface Mount LVPECL Clock Oscillator Model Pxxx Series 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description: Features: The Connor Winfield Pxxx Series are 5.0x7.0mm Surface Mount, LVPECL, Fixed Frequency Crystal Controlled Oscillator (XO) designed for applications requiring tight frequency stability, wide temperature range and low jitter. Operating at 2.5V or 3.3V supply voltage, the Pxxx Series provides an LVPECL Differential Outputs with enable / disable function. The surface mount package is designed for highdensity mounting and is optimum for mass production. •5.0 x7.0mm Surface Mount Package •2.5V or 3.3V Operation •LVPECL Differential Outputs •Frequency Stabilities Available: +/-20ppm,+/-25ppm, +/-50ppm, +/-100ppm •Temperature Ranges Available: 0 to 70°C, -40 to 85°C, 0 to 85°C, -20 to 70°C •Low Jitter <1pS RMS •Tri-State Enable/Disable on Pad 1 or 2 •Tape and Reel Packaging •RoHS Compliant / Lead Free 1314 155.5 P123 2 MH Z Absolute Maximum Ratings Parameter Minimum Parameter Minimum Parameter Minimum Storage Temperature Supply Voltage (Vcc) Input Voltage (Vc) -55 -0.5 -0.5 Nominal - - - Maximum Units Notes Maximum Units Notes Maximum Units Notes Units Notes 125 5.0 Vcc + 0.5 °C Vdc Vdc Operating Specifications Nominal Output Frequency (Fo) 25 - 312.5 MHz Total Frequency Tolerance(See Ordering Information for full part number) Model Px4x -20 - 20 ppm 1 Model Px1x -25 - 25 ppm 1 Model Px2x -50 - 50 ppm 1 Model Px3x -100 - 100 ppm 1 Operating Temperature Range Model P1xx 0 - 70 °C Model P2xx -40 - 85 °C 2 Model P3xx 0 - 85 °C Model P4xx -20 - 70 °C Supply Voltage (Vcc) Model Pxx2, Pxx5 2.375 2.5 2.625 Vdc Model Pxx3, Pxx4 3.135 3.3 3.465 Vdc Supply Current (Icc) - 60 90 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (BW = 12 KHz to 20 MHz) 25 < Fo < 60 MHz - 1.3 2.0 ps RMS 60 < Fo < 80 MHz - 0.80 1.0 ps RMS 80 < Fo < 100 MHz - 0.60 0.80 ps RMS 100 < Fo < 160 MHz - 0.40 0.50 ps RMS 160 < Fo < 200 MHz - 0.30 0.40 ps RMS 200 < Fo < 312.5 MHz - 0.20 0.30 ps RMS SSB Phase Noise @ 10 Hz offset - -60 - dBc/Hz @ 100 Hz offset - -90 - dBc/Hz @ 1 KHz offset - -115 - dBc/Hz @ 10 KHz offset - -140 - dBc/Hz @ 100 KHz offset - -145 - dBc/Hz Start-Up Time - - 2 ms Input Characteristics Nominal Enable / Disable Option: Models Pxx2, Pxx3 E/D Pad 1. N/C Pad 2 Models Pxx4, Pxx5 E/D Pad 2. N/C Pad 1 Enable Input Voltage - (High) -(Vih) 70%Vcc - - Vdc 3 Disable Input Voltage - (Low) - (Vil) - - 30%Vcc Vdc 3 Enable Time - - 2 ms Disable Time - - 200 ns Standby Current (When Osc. is disabled) - - 30 uA LVPECL Output Characteristics Parameter Bulletin Page Revision Date Ec217 1 of 2 17 08 April 2015 Load - Voltage (High) (Vcc = 2.5 V) (Voh) (Low) (Vcc = 2.5 V) (Vol) Voltage (High) (Vcc = 3.3 V) (Voh) (Low) (Vcc = 3.3 V) (Vol) Duty Cycle at 50% Level Rise / Fall Time: 20% to 80% Minimum - 1.475 - 2.275 - 45 - Nominal 50 - - - - 50 0.5 Maximum - - 0.880 - 1.680 55 1.0 Ohm 4 V V V V % 5 ns 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Notes: 1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. Models P242, P243 P244 and P245 are not available above 260 MHz. 2. Models P242, P243 P244 and P245 are not available above 260 MHz. 3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad. 4. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 5.Duty cycle measured at 50% of output voltage swing. Package Outline Ordering Information P Type LVPECL Clock Series 5x7 mm 1 2 3 Temperature Range Frequency Stability 1 = 0 to 70°C 2 = -40 to 85°C 3 = 0 to 85°C 4 = -20 to 70°C 4 = ±20 ppm 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm - 155.52M Supply Voltage 2 = 2.5 Vdc, E/D Pad 1 3 = 3.3 Vdc, E/D Pad 1 4 = 3.3 Vdc, E/D Pad 2 5 = 2.5 Vdc, E/D Pad 2 Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Amount of numbers after the decimal point. M = MHz 1314 P123 155.52 MHZ 0.197 (5.0mm) (2.0mm) 0.200 (5.08mm) 0.100 (2.54mm) C Bypass Package Characteristics Ground 0.079 (2.00mm) 0.165 (4.20mm) Environmental Characteristics Top View 1 Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering profile on page 2. Ground Keep Out Area Enable / Disable Function Output Disabled (High Impedance) Enabled Dimensional Tolerance +/-0.008 (+/-0.2mm) Suggested Pad Layout Hermetically sealed ceramic package and metal cover Function: Low: High or Open: (Bottom View) 0.102 (2.6mm) 0.079 MAX Example: Part Number P123-155.52M = LVPECL Output, 0 to 70, +/-50ppm, 3.3Vdc, E/D Pad 1, Output Frequency 155.52MHz Attention: Models P242, P243, P244 and P245 are not available above 260 MHz. Package 0.055 (1.4mm) 0.275 (7.0mm) 0.070 (1.80mm) Pad Connections Models: Pxx2, Pxx3 1: Enable / Disable 2 N/C 3: Ground 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Test Circuit Models Pxx4, Pxx5 1: N/C 2 Enable / Disable 3: Ground 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Output Waveform R3 Duty Cycle 0.1 uF 10 nF R4 6 5 4 1 2 3 R1 OE or N/C R2 Vcc = Vcc2 Vcc 2.5V 3.3V R1 / R3 250 Ohms 130 Ohms Q 80% 50% 20% Q tr R2 /R4 62.5Ohms 82 Ohms tf Tape and Reel Dimensions Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C Direction of Feed (Customer) 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C 16mm Tape Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright 2015 The Connor-Winfield Corporation Not intended for life support applications. EC217 2 of 2 17 08 April 2015