LVCMOS VCXO Specification Model V803 Description: 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Features: The Connor-Winfield, RoHS compliant, V803 is a 3.3V Voltage Controlled Crystal Oscillator (VCXO) with LVCMOS output and enable/disable function. The V803 is designed for use with applications utilizing a PLL system requiring low jitter and tight frequency stability. The surface mount package is designed for highdensity mounting and is optimum for mass production. CW 1116 74.25 V803 MHZ 3.3 Vdc Operation Absolute Pull Range (APR): ± 50 ppm Temperature Range: 0 to 70°C Low Jitter: <1ps RMS LVCMOS Output 5x7 mm SMT Package Vc has High Input Resistance, Pad 1 Tri-State Enable/Disable, Pad 2 Tape and Reel Packaging RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Minimum Storage Temperature Supply Voltage (Vcc) Control Voltage (Vc) -40 -0.5 -0.5 Nominal - - - Maximum 85 4.6 Vcc + 0.5 Units Notes Units Notes Units Notes °C Vdc Vdc Operating Specifications Parameter Minimum Nominal Maximum Center Frequency: (Fo) 27 - 130 MHz Operating Temp Range: 0 - 70 °C Supply Voltage: (Vcc) 3.135 3.3 3.465 Vdc Supply Current :(Icc) - - 30 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter - 0.5 1.0 ps RMS 1 Typical SSB Phase Noise @ 74.25 MHz @ 10 Hz offset - -76 - dBc/Hz @ 100 Hz offset - -100 - dBc/Hz @ 1 KHz offset - -128 - dBc/Hz @ 10 KHz offset - -145 - dBc/Hz @ 100 KHz offset - -152 - dBc/Hz @ 1 MHz offset - -153 - dBc/Hz Start-Up Time - - 10 ms Input Characteristics Parameter Minimum Control Voltage Range (Vc) Absolute Pull Range (APR) Monotonic Linearity DC Input Impedance Modulation Bandwidth (3dB) Enable Input Voltage (High) (Vih) Disable Input Voltage (Low) (Vil) 0.3 ±50 -10 2M 25 2.4 - Nominal 1.65 - - - - - - Maximum 3.0 - 10 - - - 0.4 Vdc ppm % Ohm KHz V V 2 3 4 4 LVCMOS Output Characteristics Parameter Load Voltage (High) Voh (Low) Vol Current (High) Ioh (Low) Iol Duty Cycle at 50% Level Rise / Fall Time: 20% to 80% Bulletin Page Revision Date VX545 1 of 2 04 03 May 2013 Minimum - 2.4 - - - 45 - Nominal 15 - - - - 50 - Maximum - - 0.4 -4 4 55 2 Units Notes pF V V mA mA % ns Notes: 1. BW= 12 KHz to 20 MHz, 2. Absolute Pull Range (APR) is the minimum guaranteed pull range of the VCXO under all conditions over lifetime operation including calibration @ 25°C,frequency stability vs. the change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and 10 years aging. The APR is referenced to (Fo). Positive transfer function. 3. Measured from pin 1 to ground. 4.Oscillator output is enabled with no connection on pad 2. Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Package Characteristics Ordering Information Package Hermetically sealed ceramic surface mount package with case ground metal cover V803 Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering profile on page 2. Package Layout 0.275 (7.00mm) Temperature 260°C 0.055 (1.40mm) VCXO SERIES CENTER FREQUENCY Suggested Pad Layout 0.200 (5.08mm) 0.100 (2.54mm) C Bypass 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C CW 0.197 (5.00mm) - 074.25M 1116 V803 74.25M Ground 0.079 (2.00mm) 0.165 (4.20mm) 1 0.102 (2.6mm) Dimensional Tolerance +/-0.008 (+/-0.2mm) 0.700 (1.80mm) Top View Ground Keep Out Area Typical Phase Noise 0.070 (1.80mm) Pad Connections 1: 2 3: 4: 5: 6: Control Voltage (Vc) Enable / Disable Ground Output Q N/C Supply Voltage (Vcc) Enable / Disable Function Function: High or Open Low Test Circuit Outputs Enabled Disabled (High Impedance) Output Waveform N/C 6 5 4 1 2 3 Control Voltage Enable / Disable Solder Profile Tape and Reel Dimensions Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Bulletin Dimensional Tolerance: ±.02” (.508mm) ±.005” (.127mm) Page Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation VX545 2 of 2 04 03 May 2013