THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS X505 0713 800.0M 3.3V SURFACE MOUNT 5.0 x 7.5mm LVDS CLOCK OSCILLATOR X505 DESCRIPTION ABSOLUTE M AXIMUM RATING S TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C -0.5 - 4.6 Vdc MINIMUM NOMINAL MAXIMUM UNITS 200 - 800 MHz Total Frequency Tolerance -50 - 50 ppm Operating Temperature Range -40 - 85 °C Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFIC ATIONS NOTE TABLE 2.0 PARAMETER Center Frequency (Fo) NOTE 1 Supply Voltage (Vcc) 3.15 3.3 3.45 Supply Current (Icc) - - 100 mA Jitter (BW=10Hz to 20MHz) - - 10 ps rms Jitter (BW=12kHz to 80MHz) - - 2 ps rms SSB Phase Noise at 10Hz offset - -40 - dBc/Hz SSB Phase Noise at 100Hz offset - -70 - dBc/Hz SSB Phase Noise at 1KHz offset - -100 - dBc/Hz SSB Phase Noise at 10KHz offset - -115 - dBc/Hz SSB Phase Noise at 100KHz offset - -120 - dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS NOTE 2 LVDS OUTPUT CHARACTERISTICS LOAD Output Differential Voltage FEATURES TABLE 3.0 PARAMETER (Vod) Duty Cycle at 50% Level - - 100 Ohms 250 - 450 mV 40 50 60 % - 0.6 1.0 nS Rise / Fall Time The Connor-Winfield X505 is a 3.3V Crystal Controlled Oscillator (XO) with LVDS differential outputs. The X505 is designed for use with PLL systems requiring tight frequency stability vs. change in temperature and high frequency output over the industrial temperature range. The X505 is designed using a 2x or 4x PLL multiplication to achieve the high frequency output. 3.3V OPERATION LOW JITTER <2pS RMS TOTAL FREQUENCY TOLERANCE: ±50ppm TEMPERATURE RANGE: -40 to 85°C PACKAG E CHARACTERISTICS TABLE 4.0 Package Hermetically sealed crystal on a ceramic package. PROCESS RECOMMENDATIONS TABLE 5.0 Solder Reflow Notes 1.0 2.0 See solder profile on page 2. DIFFERENTIAL LVDS OUTPUTS SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging. Vod measured with 100 ohm resistor between the true output and the complementary output. RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION X505 - 800.0M LVDS CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: DS020 PAGE 1 OF 2 REV: 01 DATE: 04/03/07 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Layout Suggested Pad Layout X505 0713 800.0M Vcc Top View 1 Pin 1 Top View Bottom View Dimensional Tolerance: ±.005 (.127mm) Output Waveforms Pin Connections Pin 1 2 3 4 5 6 Test Circuit Function N/C N/C Ground (Case) Output Q Comp Output Q Vcc Solder Profile Temperature Q 260°C 260°C 220°C 180°C Vod 100 ohm 150°C 120°C 2 Q 0 N/C 120 S Max. N/C Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: DS020 PAGE 2 OF 2 REV: 01 DATE: 04/03/07 aCopyright 2001 Connor-Winfield all rights reserved.