CR-A Series Mini-SIP SSR Ratings to 2A @ 280 VAC 15-72 V DC control Zero-crossing (resistive loads) output te • • • • PRODUCT SELECTION 24 VDC 60 VDC CR01A-2240 CR02A-2240 ol e Control Voltage OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (20ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum l²t for fusing (10ms)[A²s] 12-280 600 1.5 500 2 0.025 40 1.6 8 bs INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ Nominal Voltage Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 15-30 VDC 15 VDC 9 VDC 7 mAdc 3.2 K Ohm 1/2 Cycle 1/2 Cycle 35-72 VDC 35 VDC 35 VDC 3 mAdc 21.3 K Ohm 1/2 Cycle 1/2 Cycle O GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and ins ulation resistence are measured between input and output. 3) Off-State dv/dt test method per EIA/NARM standard RS-443 Parameters 2500 Vrms 10 9 Ohm 8.0 pF -20 to 80˚C -40 to 100˚C 0.15 oz. (4.3g) UL94V-0 Moulded epoxy ol e te MECHANICAL SPECIFICATIONS O bs THERMAL DERATE INFORMATION O te ol e bs O bs ol e te ANNEX - ENVIROMENTAL INFORMATION