MCMX Series • SIP SSR • Ratings to 5A @ 60 VDC, 10A @ 60 VDC and 6A @ 100 VDC • MOSFET output • DC control • Low on-state impedance PRODUCT SELECTION Control Voltage 3-10 VDC 5A 6A 10A MCMX60D5 MCMX100D6 MCMX60D10 0-60 100 5 0 .10 60 0.5 0-100 100 6 0 .040 100 0.24 0-60 100 (4) 10 0 .018 100 0.18 OUTPUT SPECIFICATIONS (1)(3) Description Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [µAdc] Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum On-State Resistence [Ohm] (2) Maximum Surge Current (10msec) [Apk] Maximum On-State Voltage Drop @ Rated Current [VDC] INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [µsec] 3.0-10.0 VDC 3.0 VDC 1 .0 VDC 15 mAdc 300 Ohm 1.0 300 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) 2) 3) 4) All parameters at 25°C unless otherwise noted. Dielectric and insulation resistance are measured between input and output. Inductive loads should be diode suppressed. At 55 Vdc. Parameters 2500 Vrms 109 Ohm 15 pF -40 to 80°C -40 to 125°C 0.7 oz. (20g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS UL/cUL E116950 (6 and 10A models only) Rev. 120210 ANNEX - ENVIROMENTAL INFORMATION