HDC Series • Ratings of 120A and 160A @ 150VDC • LED Status Indicator • Heavy Duty Stud Terminals • AC or DC control • µS Turn-On and Off times • Low On-State Voltage Drop • PWM to 1K Hz PRODUCT SELECTION Control Voltage 4.5-32 Vdc 90-140 Vac 120A 160A HDC200D120 HDC200A120 HDC200D160 HDC200A160 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [Vdc] Blocking Voltage [Vdc] Rated Load Current [Arms] (2) Minimum Load Current [mA] Maximum Surge Current (10ms) [Adc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Maximum On-State Voltage Drop @ Rated Current [Vdc] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance @ Rated Current (RDS-ON) [mOhms] Wire Size max (solid/stranded) [AWG/ IEC mm²] Output Terminal Nut Torque Range [in lb (Nm) Maximum PWM (Hz) (3) 120A 160A 7-150 200 120 2.5 1200 0.2 0.72 0.25 6.0 2/0 / 67.4 225-300 (25.4-33.9) 1000 7-150 200 160 2.5 1600 0.2 0.64 0.23 4.0 2/0 / 67.4 225-300 (25.4-33.9) 1000 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn-Off Voltage Minimum Input Current @ Minimum Voltage (for on-state) Maximum Input Current @ Maximum Voltage Nominal Input Impedance Maximum Turn-On Time at min voltage Maximum Turn-On Time at max voltage Maximum Turn-Off Time at min voltage Maximum Turn-Off Time at max voltage LED Status Indicator (Color) Terminal Type / size in (mm) HDCxxD HDCxxA 4.5-32 Vdc 4.2 VDC 23 mA 45 mA Current Regulated 92 µs 12.0 µs 195 µs 405 µs Green QC / 0.187 (4.75) 90-140 VAC 35 VAC 31 mA 33 mA Current Regulated 6 ms 4 ms 9.2 ms 9.2 ms Green QC / 0.187 (4.75) GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Ambient Operating Temperature Range Ambient Storage Temperature Range Maximum Humidity Weight (typical) lbs/grams Housing Material SSR Mounting Torque Range [in lbs/Nm] Baseplate Material Encapsulation RoHS Exemption #’s GENERAL NOTES 1) All parameters at 40°C unless otherwise specified. 2) Heat sinking required, see derating curves. 3) See PWM Derating Chart. WIRING DIAGRAM Parameters 2500 Vrms 109 Ohm -30 to 80 °C -40 to 125 °C 85% non-condensing 0.75/340.2 PBT 30% GF, UL 94 V-0 18-20 (2-2.2) Aluminum Thermal Conductive Epoxy None MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION PWM DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge: Level 3 (Criteria A) IEC 61000-4-4 : Electrically Fast Transients: Level 3 (Criteria A) IEC 61000-4-5 : Electricsl Surges: Level 3 (Criteria A) Rev. 072312 ACCESSORIES ANNEX - ENVIROMENTAL INFORMATION