DP Series • DC Reversing Solid State Contactor • Ratings of 20, 40 & 60 Amps • Load voltage ratings of 1-48VDC • Optional Soft Start w/Brake, Soft Start/Soft Stop no Brake • LED input status indicator. Green (Forward), Yellow (Reverse) • DC control • cULus Recognized, IEC Rated, CE & RoHS Compliant PRODUCT SELECTION Description 4-15 VDC 18-32VDC 20 A 40 A 60 A DP4R60D20 DP4R60E20 DP4R60D40 DP4R60E40 DP4R60D60 DP4R60E60 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [VDC] UL 508 Resistive Load, IEC 60947-4-1 DC-1 [Adc] UL 508 Motor Controller, IEC 60947-4-1 DC-3 [FLA] Minimum Load Current [A] Maximum Surge Current (10ms) [Adc] Maximum Off-State Leakage Current @ Rated Voltage [µA] Maximum On-State Voltage Drop @ Rated Current [Vdc] Combined Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance, per switch, (RDS-ON) [Ohms] Total Power Dissipation per module, 2 switches conducting, Tj=100° C [Watts] Internal PWM For Soft Start/Stop Versions [Duty Cycle 10-100%] [Hz] Output Terminal Screw size Screw Torque Range [in lbs/Nm] Maximum Wire Size Weight (typical) 20 A 40 A 60 A 1-48 20 13 0.10 80 20 0.28 0.40 0.014 20 200 10-32 Combo Head 15-20 / 1.7-2.3 10 AWG 10.9 oz (310g) 1-48 40 14 0.10 140 20 0.28 0.20 0.007 40 200 1/4-20 Hex 20-25 / 2.3-2.8 8 AWG 12.2 oz (345g) 1-48 60 15 0.10 240 20 0.30 0.13 0.005 60 200 1/4-20 Hex 20-25 / 2.3-2.8 6 AWG 12.2 oz (345g) INPUT SPECIFICATIONS (1) Description Logic Supply Voltage Range [VDC] Minimum Logic Supply Current [mA] (2) Maximum Logic Supply Current [mA] (2) Control Voltage Range [VDC] Minimum Control Input Current @ Min voltage [mA] Maximum Control Input Current @ Max voltage [mA] Typical Interlocking Time [msec] Mating Connector (Not Supplied) DR4R60Dxx DR4R60Exx 4.5-15 16 20 4.5-15 0.20 1.0 200 Molex 50579404 or Equivalent 18-32 20 25 18-32 1.0 2.0 200 Molex 50579404 or Equivalent GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input to Output (pF) Ambient Operating Temperature Range Ambient Storage Temperature Range Housing Material Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Input circuit incorporates active current limiter WIRING DIAGRAM Parameters 2500 Vrms 109 Ohm 10 pF -30 to 80°C -40 to 125°C Valox 420 SEO Black, UL 94 V-0 Thermally conductive Epoxy MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS IEC 60068-2-6 Vibration – Compliant [1.55mm/ 10-55Hz] IEC 60068-2-27 Shock – Compliant [15G/11ms] IEC 61000-4-2 : Electrostatic Discharge – Level 2 IEC 61000-4-4 : Electrically Fast Transients – Level 2 (Criteria A) IEC 61000-4-5 : Electrical Surges - Level 2 (Criteria A) Rev 081312 ACCESSORIES OPERATING MODES ANNEX - ENVIROMENTAL INFORMATION