BIPOLAR DIGITAL INTEGRATED CIRCUITS μPB1507GV UE D 3GHz INPUT DIVIDE BY 256, 128, 64 PRESCALER IC FOR ANALOG DBS TUNERS The μPB1507GV has 3.0 GHz input, high division silicon prescaler ICs for analog DBS tuner applications. This IC divide-by-256, 128 and 64 contribute to produce analog DBS tuners with kit-use of 17 K series DTS controller or standard CMOS PLL synthesizer IC. The μPB1507GV is a shrink package version of the μPB586G/588G or μPB1505GR so that these smaller packages contribute to reduce the mounting space replacing from conventional ICs. The μPB1507GV are manufactured using the high f T NESAT™IV silicon bipolar process. This process uses IN silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability. FEATURES High toggle frequency • High-density surface mounting : 8-pin plastic SSOP (175 mil) • Low current consumption : 5 V, 19 mA • Selectable high division : ÷256, ÷128, ÷64 • Pin connection variation APPLICATION : fin = 0.5 GHz to 3.0 GHz NT • : μPB1507GV These ICs can use as a prescaler between local oscillator and PLL frequency synthesizer included modulus SC O prescaler. For example, following application can be chosen; • Analog DBS tuner’s synthesizer • Analog CATV converter synthesizer ORDERING INFORMATION PART NUMBER μPB1507GV-E1-A PACKAGE MARKING SSOP (175 mil) (Pb-Free) 1507 SUPPLYING FORM direction. 1 000 p/reel. Remarks To order evaluation samples, please contact your local nearby sales office. DI (Part number for sample order: μPB1507GV-A) Caution: Electro-static sensitive devices Document No. P10767EJ3V0DS00 (3rd edition) Date Published January 1998 N CP(K) μPB1507GV PIN CONNECTION (Top View) 1 SW1 IN 2 IN VCC 3 IN SW1 4 GND OUT 5 NC GND 6 SW2 SW2 7 OUT NC 8 VCC IN D μPB1507GV UE Features Part No. ICC (division, Freq.) (mA) fin VCC (GHz) (V) Package μPB586G 28 0.5 to 2.5 4.5 to 5.5 ÷128, ÷64, 2.5 GHz μPB588G 26 0.5 to 2.5 4.5 to 5.5 ÷256, ÷128, ÷64 μPB1505GR 14 0.5 to 3.0 4.5 to 5.5 μPB1507GV 19 0.5 to 3.0 4.5 to 5.5 8 pin SOP 225 mil NT ÷512, ÷256, 2.5 GHz • μPB1506GV IN PRODUCT LINE-UP Remarks Pin NO. 8 pin SSOP 175 mil This table shows the TYP values of main parameters. Pin connection Original Standard Standard Please refer to ELECTRICAL CHARACTERISTICS. μPB586G and μPB588G are discontinued. SC O • INTERNAL BLOCK DIAGRAM D Q IN CLK IN CLK Q D Q CLK D Q CLK Q Q DI CLK Q Q CLK Q D 2 D D Q D Q CLK Q CLK Q D Q CLK Q SW1 OUT Q SW2 AMP μPB1507GV SYSTEM APPLICATION EXAMPLE RF unit block of Analog DBS tuners 1stIF input from DBS converter MIX Baseband output SAW AGC amp. FM demo. D BPF UE To 2150 MHz High division prescaler μ PB1506GV or μ PB1507GV OSC To 2650 MHz CMOS PLL synthesizer LPF IN loop filter RF unit block of Analog CATV converter upconverter To 800 MHz BPF NT BPF downconverter OSC To 1300 MHz High division prescaler μ PB1506GV or μ PB1507GV CMOS PLL synthesizer LPF loop filter DI SC O To 2000 MHz 3 μPB1507GV PIN EXPLANATION Applied voltage V Pin voltage V IN ⎯ 2.9 Functions and explanation Signal input pin. This pin should be coupled to signal source with capacitor (e.g. 1 000 pF) for DC cut. IN ⎯ 2.9 Signal input bypass pin. This pin must be equipped GND 0 ⎯ μPB1507GV 1 8 UE with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. Pin no. D Pin name Ground pin. Ground pattern on the board should be 5 formed as wide as possible to minimize ground impedance. SW1 H/L ⎯ Divide ratio input pin. The ratio can be determined by following applied level to these pins. IN SW2 H SW2 SW1 3 L H ÷64 ÷128 L ÷128 ÷256 6 VCC 4.5 to 5.5 ⎯ NT These pins should be equipped with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. Power supply pin. This pin must be equipped with 2 bypass capacitor (e.g. 10 000 pF) to minimize ground impedance. OUT ⎯ 2.6 to 4.7 Divided frequency output pin. This pin is designed as 4 emitter follower output. This pin can be connected to CMOS input due to 1.2 VP-P MIN output. ⎯ ⎯ Non connection pin. This pin must be openned. DI SC O NC 4 7 μPB1507GV ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL CONDITION RATINGS UNIT VCC TA = +25 °C −0.5 to +6.0 V Input voltage Vin TA = +25 °C −0.5 to VCC + 0.5 V Total power dissipation PD Mounted on double sided copper clad Operating ambient temperature TA Storage temperature Tstg SYMBOL MIN. TYP. Supply voltage VCC 4.5 5.0 Operating ambient temperature TA IN RECOMMENDED OPERATING CONDITIONS PARAMETER −40 250 mW −40 to +85 °C −55 to +150 °C UE 50 × 50 × 1.6 mm epoxy glass PWB (TA = +85 °C) D Supply voltage MAX. UNIT 5.5 V +25 +85 NOTICE °C ELECTRICAL CHARACTERISTICS (TA = −40 to +85 °C, VCC = 4.5 to 5.5 V, ZS = 50 Ω) Circuit current SYMBOL TEST CONDITION NT PARAMETER MIN. TYP. MAX. UNIT ICC No signals 12.5 19 26.5 mA Upper limit operating frequency fin(u) Pin = −15 to +6 dBm 3.0 ⎯ ⎯ GHz Lower limit operating frequency 1 fin(L)1 Pin = −10 to +6 dBm ⎯ ⎯ 0.5 GHz Lower limit operating frequency 2 fin(L)2 Pin = −15 to +6 dBm ⎯ ⎯ 1.0 GHz Input power 1 Pin1 fin = 1.0 to 3.0 GHz −15 ⎯ +6 dBm Pin2 fin = 0.5 to 1.0 GHz −10 ⎯ +6 dBm Output Voltage Vout CL = 8 pF 1.2 1.6 ⎯ VP-P Divide ratio control input high VIH1 Connection in the test VCC VCC VCC OPEN or OPEN or OPEN or GND GND GND VCC VCC VCC OPEN or OPEN or OPEN or GND GND GND SC O Input power 2 circuit Divide ratio control input low VIL1 Connection in the test circuit Divide ratio control input high VIH2 Connection in the test circuit VIL2 Connection in the test circuit DI Divide ratio control input low 5 μPB1507GV TYPICAL CHARACTERISTICS (Unless otherwise specified TA = +25 °C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE 25 No signals TA = +85°C D 15 TA = +25°C TA = –40°C 0 UE ICC - Circuit Current - mA 20 5 0 1 2 3 4 VCC - Supply Voltage - V 5 6 Divide by 64 mode INPUT POWER vs. INPUT FREQUENCY INPUT POWER vs. INPUT FREQUENCY +20 +20 TA = +25°C +10 –10 –20 –30 VCC = 4.5 to 5.5 V –50 –60 100 –10 1000 fin - Input Frequency - MHz 4000 Vout - Output Voltage - VP-P 1.8 1.7 VCC = 5.5 V DI Vout - Output Voltage - VP-P TA = +25°C Pin = –10 dBm 1.6 VCC = 5.0 V 1.5 1.4 VCC = 4.5 V –30 TA = +85°C TA = +25 °C 1000 fin - Input Frequency - MHz TA = –40°C –50 –60 100 1000 fin - Input Frequency - MHz 4000 OUTPUT VOLTAGE vs.INPUT FREQUENCY 2.0 1.8 TA = –40°C Pin = –10 dBm VCC = 5.5 V 1.6 1.4 VCC = 5.0 V 1.2 VCC = 4.5 V 1.0 0.8 1.3 1.2 100 Guaranteed Operating Window –20 OUTPUT VOLTAGE vs.INPUT FREQUENCY 6 TA = +85°C 0 –40 SC O –40 1.9 TA = +25°C TA = –40°C NT Guaranteed Operating Window 0 2.0 VCC = 4.5 to 5.5 V +10 VCC = 4.5 to 5.5 V Pin - Input Power - dBm Pin - Input Power - dBm IN 0 0.6 4000 0.4 100 1000 fin - Input Frequency - MHz 4000 μPB1507GV OUTPUT VOLTAGE vs. INPUT RFEQUENCY 2.0 TA = +85°C Pin = –10 dBm VCC = 5.5 V VCC = 5.0 V 1.6 D 1.4 VCC = 4.5 V 1.2 1.0 UE Vout - Output Voltage - VP-P 1.8 0.8 0.6 0.4 100 1000 fin - Input Frequency - MHz 4000 INPUT POWER vs. INPUT FREQUENCY +20 Guaranteed Operating Window TA = –40°C 0 –20 –30 VCC = 4.5 to 5.5 V –40 –10 SC O –60 100 1000 fin - Input Frequency - MHz –30 –60 100 OUTPUT VOLTAGE vs. INPUT FREQUENCY 1.6 1.5 1.4 VCC = 4.5 V 1000 fin - Input Frequency - MHz 4000 TA = –40°C Pin = –10 dBm 1.8 1.7 1.6 VCC = 5.5 V VCC = 5.0 V 1.5 1.4 1.3 1.2 100 1.9 Vout - Output Voltage - VP-P VCC = 5.0 V DI Vout - Output Voltage - VP-P VCC = 5.5 V 1000 fin - Input Frequency - MHz OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 TA = +25°C Pin = –10 dBm 1.7 TA = +85°C TA = +25°C TA = –40°C –50 4000 1.8 TA = +25°C Guaranteed Operating Window –20 –40 –50 1.9 TA = +85°C NT –10 2.0 VCC = 4.5 to 5.5 V +10 VCC = 4.5 to 5.5 V Pin - Input Power - dBm +10 Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY +20 TA = +25°C 0 IN Divide by 128 mode VCC = 4.5 V 1.3 4000 1.2 100 1000 fin - Input Frequency - MHz 4000 7 μPB1507GV OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 TA = +85°C Pin = –10 dBm 1.8 1.7 D VCC = 5.5 V 1.6 VCC = 5.0 V 1.5 VCC = 4.5 V UE Vout - Output-Voltage - VP-P 1.9 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 INPUT POWER vs. INPUT FREQUENCY INPUT POWER vs. INPUT FREQUENCY +20 +20 TA = +25°C VCC = 4.5 to 5.5 V +10 Guaranteed Operating Window 0 TA = –40°C TA = +85°C TA = +25°C NT VCC = 4.5 to 5.5 V Pin - Input Power - dBm Pin - Input Power - dBm +10 0 IN Divide by 256 mode –10 –20 –30 VCC = 4.5 to 5.5 V –40 –10 Guaranteed Operating Window –20 –30 TA = +85°C TA = +25°C –40 TA = –40 °C –50 SC O –50 –60 100 1000 fin - Input Frequency - MHz 4000 –60 100 OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = +25°C Pin = –10 dBm 1.8 1.7 VCC = 5.5 V VCC = 5.0 V 1.6 DI Vout - Output Voltage - VP-P 1.9 Vout - Output Voltage - VP-P 2.0 1.5 1.4 VCC = 4.5 V 1.2 100 8 1000 fin - Input Frequency - MHz 4000 OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9 TA = –40°C Pin = –10 dBm 1.8 1.7 VCC = 5.5 V VCC = 5.0 V 1.6 1.5 1.4 1.3 1000 fin - Input Frequency - MHz VCC = 4.5 V 1.3 4000 1.2 100 1000 fin - Input Frequency - MHz 4000 μPB1507GV OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.8 VCC = 5.5 V D 1.7 VCC = 5.0 V 1.6 1.5 VCC = 4.5 V 1.4 1.3 1000 fin - Input Frequency - MHz 4000 DI SC O NT IN 1.2 100 UE Vout - Output Voltage - VP-P 1.9 TA = +85°C Pin = –10 dBm 9 μPB1507GV μPB1507GV S11 vs. INPUT FREQUENCY D VCC = 5.0 V hp C MARKER 4 3.0 GHz 4 1 3 2 2 : 1000 MHz 3 : 2000 MHz 4 : 3000 MHz NT 0.500000000 GHz 3.000000000 GHz : 500 MHz DI SC O START STOP 1 10 ANG 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000 .857 .849 .800 .764 .725 .665 .619 .573 .531 .484 .439 .377 .340 .377 .441 .464 .443 .466 .465 .454 .433 .383 .350 .332 .271 .185 –27.5 –32.0 –38.9 –43.8 –49.0 –50.9 –55.3 –59.3 –61.3 –62.8 –63.0 –59.1 –54.1 –54.7 –59.5 –67.2 –67.4 –74.5 –81.3 –89.4 –99.2 –109.6 –114.0 –124.2 –141.2 –163.6 IN D MAG S11 UE Z S11 REF 1.0 Units 200.0 mUnits/ 4 38.111 Ω 0.9707 Ω FREQUENCY MHz μPB1507GV μPB1507GV S22 vs. OUTPUT FREQUENCY Divide by 64 mode, VCC = 5.0 V hp MARKER 1 45.0 MHz D 1 1 : 45 MHz 2 : 100 MHz ANG 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000 .580 .572 .574 .574 .584 .587 .592 .587 .589 .591 .573 .604 3.4 2.5 3.0 2.7 3.0 2.6 2.4 2.6 2.9 2.9 1.7 2.9 NT 0.045000000 GHz 0.100000000 GHz IN 2 μPB1507GV S22 UE C START STOP MAG D Z S22 REF 1.0 Units 200.0 mUnits/ 1 185.13 Ω 17.789 Ω FREQUENCY MHz S22 vs. OUTPUT FREQUENCY Divide by 128 mode, VCC = 5.0 V Z S22 REF 1.0 Units 200.0 mUnits/ 1 185.02 Ω 18.953 Ω SC O hp C MARKER 1 45.0 MHz D 1 DI 2 START STOP 1 : 45 MHz 2 : 100 MHz FREQUENCY MHz MAG S22 ANG 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000 .578 .571 .572 .576 .584 .587 .589 .589 .588 .593 .598 .602 3.2 2.8 3.3 3.0 3.1 2.8 2.4 2.8 3.0 2.8 3.0 2.9 0.045000000 GHz 0.100000000 GHz 11 μPB1507GV μPB1507GV S22 vs. OUTPUT FREQUENCY Divide by 256 mode, VCC = 5.0 V hp MARKER 1 45.0 MHz D 1 1 : 45 MHz 2 : 100 MHz SC O NT 0.045000000 GHz 0.100000000 GHz DI ANG 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000 .580 .572 .571 .576 .585 .590 .589 .590 .588 .597 .600 .601 3.0 2.8 2.9 2.9 3.2 2.8 2.5 2.6 2.9 2.9 3.1 3.1 IN 2 12 S22 UE C START STOP MAG D Z S22 REF 1.0 Units 200.0 mUnits/ 1 186.76 Ω 17.82 Ω FREQUENCY MHz μPB1507GV TEST CIRCUIT D μPB1507GV C2 50 Ω C3 1 IN IN 8 2 VCC NC 7 3 SW1 C1 OPEN UE S.G SW2 6 C4 4 OUT GND 5 IN C5 VCC = +5.0 V ±10% Monitor C6 1 MΩ NT 0.6 pF C7 Stray cap. Oscilloscope or Counter SC O 50 Ω • SG (HP-8665A) • Counter (HP5350B) : To measure input sensitivity Divide ratio setting SW2 or : To measure output voltage swing SW1 H L H 1/64 1/128 L 1/128 1/256 H: Connect to VCC L: Connect to GND or OPEN DI Oscilloscope 13 μPB1507GV ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD D μPB1507GV IN IN C C6 C 3 SW2 7 C OUT μ PB1507GV NT OUT IN C 5 C 4 C1 VCC SW1 UE 2 1P EVALUATION BOARD CHARACTERS (1) 35 μm thick double-sided copper clad 50 × 50 × 0.4 mm polyimide board (2) Back side: GND pattern (3) Solder plated patterns : Through holes DI SC O (4) ° 14 μPB1507GV PACKAGE DIMENSIONS 8 PIN PLASTIC SSOP (UNIT: mm) (175 mil) 5 D 8 3˚ –3˚ +7˚ UE detail of lead end 1 4 3.2 ±0.1 0.15 –0.05 0.65 0.575 MAX. 0.5 ±0.2 +0.10 0.3 –0.05 0.10 M 0.15 DI SC O 0.1±0.1 0.87 ±0.2 +0.10 NT 1.5 ±0.1 1.8 MAX. 3.0 MAX. IN 4.94 ±0.2 15 μPB1507GV NOTE CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired operation). (3) Keep the wiring length of the ground pins as short as possible. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. D (4) Connect a bypass capacitor (e.g. 10 000 pF) to the VCC pin. Other soldering methods and μPB1507GV Soldering method Infrared ray reflow Soldering conditions Package peak temperature: 235 °C, IN Package peak temperature: 215 °C, Recommended condition symbol IR35-00-3 Hour: within 30 s. (more than 210 °C), Time: 3 times, Limited days: no.* VPS UE conditions than the recommended conditions are to be consulted with our sales representatives. VP15-00-3 Hour: within 40 s. (more than 200 °C), Time: 3 times, Limited days: no.* Wave soldering Soldering tub temperature: less than 260 °C, Pin part heating WS60-00-1 NT Hour: within 10 s., Time: 1 time, Limited days: no. Pin area temperature: less than 300 °C, Hour: within 3 s./pin, Limited days: no.* * It is the storage days after opening a dry pack, the storage conditions are 25 °C, less than 65 % RH. SC O Caution The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document DI SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E). 16