NEC UPB588G

DATA SHEET
BIPOLAR DIGITAL INTEGRATED CIRCUITS
PPB1506GV, PPB1507GV
3GHz INPUT DIVIDE BY 256, 128, 64 PRESCALER IC
FOR ANALOG DBS TUNERS
The PPB1506GV and PPB1507GV are 3.0 GHz input, high division silicon prescaler ICs for analog DBS tuner
applications. These ICs divide-by-256, 128 and 64 contribute to produce analog DBS tuners with kit-use of 17 K
series DTS controller or standard CMOS PLL synthesizer IC. The PPB1506GV/PPB1507GV are shrink package
versions of the PPB586G/588G or PPB1505GR so that these smaller packages contribute to reduce the mounting
space replacing from conventional ICs.
The PPB1506GV and PPB1507GV are manufactured using NEC’s high fT NESAT™IV silicon bipolar process.
This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from
external pollution and prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and
reliability.
FEATURES
x
High toggle frequency
: fin = 0.5 GHz to 3.0 GHz
x
High-density surface mounting : 8-pin plastic SSOP (175 mil)
x
Low current consumption
: 5 V, 19 mA
x
Selectable high division
: y256, y128, y64
x
Pin connection variation
: PPB1506GV and PPB1507GV
APPLICATION
These ICs can use as a prescaler between local oscillator and PLL frequency synthesizer included modulus
prescaler. For example, following application can be chosen;
x
Analog DBS tuner’s synthesizer
x
Analog CATV converter synthesizer
ORDERING INFORMATION
PART NUMBER
PACKAGE
MARKING
SUPPLYING FORM
PPB1506GV-E1
8-pin plastic
1506
Embossed tape 8 mm wide. Pin 1 is in tape pull-out
PPB1507GV-E1
SSOP (175 mil)
1507
direction. 1 000 p/reel.
Remarks To order evaluation samples, please contact your local NEC sales office.
(Part number for sample order: PPB1506GV, PPB1507GV)
Caution: Electro-static sensitive devices
Document No. P10767EJ3V0DS00 (3rd edition)
Date Published January 1998 N CP(K)
Printed in Japan
©
1996
PPB1506GV, PPB1507GV
PIN CONNECTION (Top View)
1
8
2
7
3
6
4
5
Pin
NO.
PPB1506GV
PPB1507GV
1
SW1
IN
2
IN
VCC
3
IN
SW1
4
GND
OUT
5
NC
GND
6
SW2
SW2
7
OUT
NC
8
VCC
IN
PRODUCT LINE-UP
Part No.
Features
(division, Freq.)
ICC
(mA)
fin
(GHz)
VCC
(V)
Package
8 pin SOP 225 mil
y512, y256, 2.5 GHz
PPB586G
28
0.5 to 2.5
4.5 to 5.5
y128, y64, 2.5 GHz
PPB588G
26
0.5 to 2.5
4.5 to 5.5
y256, y128, y64
PPB1505GR
14
0.5 to 3.0
4.5 to 5.5
3.0 GHz
PPB1506GV
19
0.5 to 3.0
4.5 to 5.5
PPB1507GV
19
0.5 to 3.0
4.5 to 5.5
Remarks
x
Pin connection
NEC original
Standard
8 pin SSOP 175 mil
NEC original
Standard
This table shows the TYP values of main parameters.
Please refer to ELECTRICAL
CHARACTERISTICS.
x
PPB586G and PPB588G are discontinued.
INTERNAL BLOCK DIAGRAM
D
Q
IN
CLK
IN
CLK Q
D
Q
CLK
D
Q
CLK
Q
D
CLK
Q
D
Q
Q
CLK
D
Q
CLK
Q
Q
CLK
Q
D
Q
D
Q
CLK
Q
OUT
Q
AMP
SW1
2
SW2
PPB1506GV, PPB1507GV
SYSTEM APPLICATION EXAMPLE
RF unit block of Analog DBS tuners
1stIF input
from DBS converter
MIX
BPF
Baseband output
SAW
AGC amp.
FM demo.
To 2150 MHz
High division prescaler
µ PB1506GV or
µ PB1507GV
OSC
CMOS
PLL
synthesizer
To 2650 MHz
LPF
loop filter
RF unit block of Analog CATV converter
upconverter
To 800 MHz
BPF
downconverter
BPF
To 1300 MHz
OSC
High division prescaler
µ PB1506GV or
µ PB1507GV
CMOS
PLL
synthesizer
To 2000 MHz
LPF
loop filter
3
PPB1506GV, PPB1507GV
PIN EXPLANATION
Pin name
Applied
voltage
V
Pin
voltage
V
IN
•
2.9
IN
•
GND
SW1
Functions and explanation
Pin no.
PPB1506GV
PPB1507GV
Signal input pin. This pin should be coupled to signal
source with capacitor (e.g. 1 000 pF) for DC cut.
2
1
2.9
Signal input bypass pin. This pin must be equipped
with bypass capacitor (e.g. 1 000 pF) to minimize
ground impedance.
3
8
0
•
Ground pin. Ground pattern on the board should be
formed as wide as possible to minimize ground
impedance.
4
5
H/L
•
Divide ratio input pin. The ratio can be determined by
following applied level to these pins.
1
3
6
6
SW2
H
SW2
L
H
y64
y128
L
y128
y256
SW1
These pins should be equipped with bypass capacitor
(e.g. 1 000 pF) to minimize ground impedance.
4
VCC
4.5 to 5.5
•
Power supply pin. This pin must be equipped with
bypass capacitor (e.g. 10 000 pF) to minimize ground
impedance.
8
2
OUT
•
2.6 to 4.7
Divided frequency output pin. This pin is designed as
emitter follower output. This pin can be connected to
CMOS input due to 1.2 VP-P MIN output.
7
4
NC
•
•
Non connection pin. This pin must be openned.
5
7
PPB1506GV, PPB1507GV
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
CONDITION
RATINGS
UNIT
Supply voltage
VCC
TA = +25 qC
ð0.5 to +6.0
V
Input voltage
Vin
TA = +25 qC
ð0.5 to VCC + 0.5
V
Total power dissipation
PD
Mounted on double sided copper clad
50 u 50 u 1.6 mm epoxy glass PWB (TA =
+85 qC)
250
mW
Operating ambient temperature
TA
ð40 to +85
qC
Storage temperature
Tstg
ð55 to +150
qC
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Supply voltage
VCC
4.5
5.0
5.5
V
Operating ambient temperature
TA
ð40
+25
+85
qC
NOTICE
ELECTRICAL CHARACTERISTICS (TA = ð40 to +85 qC, VCC = 4.5 to 5.5 V, ZS = 50 : )
PARAMETER
SYMBOL
TEST CONDITION
MIN.
TYP.
MAX.
UNIT
Circuit current
ICC
No signals
12.5
19
26.5
mA
Upper limit operating frequency
fin(u)
Pin = ð15 to +6 dBm
3.0
•
•
GHz
Lower limit operating frequency 1
fin(L)1
Pin = ð10 to +6 dBm
•
•
0.5
GHz
Lower limit operating frequency 2
fin(L)2
Pin = ð15 to +6 dBm
•
•
1.0
GHz
Input power 1
Pin1
fin = 1.0 to 3.0 GHz
ð15
•
+6
dBm
Input power 2
Pin2
fin = 0.5 to 1.0 GHz
ð10
•
+6
dBm
Output Voltage
Vout
CL = 8 pF
1.2
1.6
•
VP-P
Divide ratio control input high
VIH1
Connection in the test
circuit
VCC
VCC
VCC
Divide ratio control input low
VIL1
Connection in the test
circuit
OPEN or
GND
OPEN or
GND
OPEN or
GND
Divide ratio control input high
VIH2
Connection in the test
circuit
VCC
VCC
VCC
Divide ratio control input low
VIL2
Connection in the test
circuit
OPEN or
GND
OPEN or
GND
OPEN or
GND
5
PPB1506GV, PPB1507GV
TYPICAL CHARACTERISTICS (Unless otherwise specified TA = +25 qC)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
25
No signals
TA = +85°C
ICC - Circuit Current - mA
20
15
TA = +25°C
0
TA = –40°C
5
0
0
1
2
3
4
VCC - Supply Voltage - V
5
6
Divide by 64 mode
INPUT POWER vs. INPUT FREQUENCY
INPUT POWER vs. INPUT FREQUENCY
+20
+20
TA = +25°C
+10
VCC = 4.5 to 5.5 V
Pin - Input Power - dBm
Pin - Input Power - dBm
+10
Guaranteed
Operating
Window
0
–10
–20
–30
VCC = 4.5 to 5.5 V
0
–30
–50
TA = +25°C
Pin = –10 dBm
1.8
1.8
1.7
1.6
VCC = 5.5 V
VCC = 5.0 V
1.5
1.4
VCC = 4.5 V
6
1000
fin - Input Frequency - MHz
4000
TA = –40°C
Pin = –10 dBm
VCC = 5.5 V
1.6
1.4
VCC = 5.0 V
1.2
VCC = 4.5 V
1.0
0.8
1.3
1.2
100
TA = –40°C
OUTPUT VOLTAGE vs.INPUT FREQUENCY
2.0
Vout - Output Voltage - VP-P
Vout - Output Voltage - VP-P
1.9
TA = +85°C
TA = +25 °C
–60
100
OUTPUT VOLTAGE vs.INPUT FREQUENCY
2.0
TA = +85°C
–20
–50
4000
Guaranteed
Operating
Window
–10
–40
1000
fin - Input Frequency - MHz
TA = +25°C
TA = –40°C
–40
–60
100
VCC = 4.5 to 5.5 V
0.6
1000
fin - Input Frequency - MHz
4000
0.4
100
1000
fin - Input Frequency - MHz
4000
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT RFEQUENCY
2.0
Vout - Output Voltage - VP-P
1.8
TA = +85°C
Pin = –10 dBm
VCC = 5.5 V
VCC = 5.0 V
1.6
1.4
VCC = 4.5 V
1.2
1.0
0.8
0.6
0.4
100
1000
fin - Input Frequency - MHz
4000
Divide by 128 mode
INPUT POWER vs. INPUT FREQUENCY
INPUT POWER vs. INPUT FREQUENCY
+20
+20
TA = +25°C
0
+10
VCC = 4.5 to 5.5 V
–10
Pin - Input Power - dBm
Pin - Input Power - dBm
+10
Guaranteed
Operating
Window
–20
–30
VCC = 4.5 to 5.5 V
TA = –40°C
0
–30
–50
–50
1000
fin - Input Frequency - MHz
OUTPUT VOLTAGE vs. INPUT FREQUENCY
TA = +25°C
Pin = –10 dBm
1.9
1.8
1.7
1.6
VCC = 5.5 V
VCC = 5.0 V
1.5
1.4
VCC = 4.5 V
1.2
100
4000
TA = –40°C
Pin = –10 dBm
1.8
1.7
1.6
VCC = 5.5 V
VCC = 5.0 V
1.5
1.4
1.3
1000
fin - Input Frequency - MHz
OUTPUT VOLTAGE vs. INPUT FREQUENCY
2.0
Vout - Output Voltage - VP-P
Vout - Output Voltage - VP-P
1.9
TA = +85°C
TA = +25°C
TA = –40°C
–60
100
4000
TA = +25°C
Guaranteed
Operating
Window
–20
–40
–60
100
TA = +85°C
–10
–40
2.0
VCC = 4.5 to 5.5 V
VCC = 4.5 V
1.3
1000
fin - Input Frequency - MHz
4000
1.2
100
1000
fin - Input Frequency - MHz
4000
7
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT FREQUENCY
2.0
Vout - Output-Voltage - VP-P
1.9
TA = +85°C
Pin = –10 dBm
1.8
1.7
VCC = 5.5 V
1.6
VCC = 5.0 V
1.5
VCC = 4.5 V
1.4
1.3
1.2
100
1000
fin - Input Frequency - MHz
4000
Divide by 256 mode
INPUT POWER vs. INPUT FREQUENCY
INPUT POWER vs. INPUT FREQUENCY
+20
+20
TA = +25°C
0
+10
VCC = 4.5 to 5.5 V
–10
Pin - Input Power - dBm
Pin - Input Power - dBm
+10
VCC = 4.5 to 5.5 V
Guaranteed
Operating
Window
–20
–30
VCC = 4.5 to 5.5 V
0
TA = –40°C
TA = +85°C
TA = +25°C
–10
Guaranteed
Operating
Window
–20
–30
–40
–40
–50
–50
TA = +85°C
TA = +25°C
TA = –40 °C
–60
100
1000
fin - Input Frequency - MHz
–60
100
4000
OUTPUT VOLTAGE vs. INPUT FREQUENCY
Vout - Output Voltage - VP-P
1.9
TA = +25°C
Pin = –10 dBm
1.9
1.8
1.7
VCC = 5.5 V
VCC = 5.0 V
1.6
1.5
1.4
VCC = 4.5 V
1.2
100
8
TA = –40°C
Pin = –10 dBm
1.8
1.7
VCC = 5.5 V
VCC = 5.0 V
1.6
1.5
1.4
1.3
4000
OUTPUT VOLTAGE vs. INPUT FREQUENCY
2.0
Vout - Output Voltage - VP-P
2.0
1000
fin - Input Frequency - MHz
VCC = 4.5 V
1.3
1000
fin - Input Frequency - MHz
4000
1.2
100
1000
fin - Input Frequency - MHz
4000
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT FREQUENCY
2.0
Vout - Output Voltage - VP-P
1.9
TA = +85°C
Pin = –10 dBm
1.8
1.7
VCC = 5.5 V
VCC = 5.0 V
1.6
1.5
VCC = 4.5 V
1.4
1.3
1.2
100
1000
fin - Input Frequency - MHz
4000
PPB1506GV
S11 vs. INPUT FREQUENCY
VCC = 5.0 V
S11
Z
REF 1.0 Units
200.0 mUnits/
3
33.881 Ω –52.875 Ω
hp
∗
C
MARKER 3
2.0 GHz
D
4
3
1
2
START
STOP
0.500000000 GHz
3.000000000 GHz
1
: 500 MHz
2
: 1000 MHz
3
: 2000 MHz
4
: 3000 MHz
FREQUENCY
MHz
MAG
S11
ANG
500.0000
600.0000
700.0000
800.0000
900.0000
1000.0000
1100.0000
1200.0000
1300.0000
1400.0000
1500.0000
1600.0000
1700.0000
1800.0000
1900.0000
2000.0000
2100.0000
2200.0000
2300.0000
2400.0000
2500.0000
2600.0000
2700.0000
2800.0000
2900.0000
3000.0000
.868
.828
.794
.761
.721
.706
.662
.629
.595
.554
.516
.440
.428
.543
.555
.560
.558
.564
.570
.574
.574
.564
.530
.476
.411
.331
–26.6
–32.6
–37.4
–41.9
–46.5
–49.3
–54.0
–57.2
–60.2
–62.9
–64.8
–61.9
–51.0
–61.5
–68.4
–74.7
–79.5
–84.9
–90.9
–98.3
–107.9
–118.3
–131.4
–144.6
–159.1
–175.8
9
PPB1506GV, PPB1507GV
PPB1506GV
S22 vs. OUTPUT FREQUENCY
Divide by 64 mode, VCC = 5.0 V
S22
Z
REF 1.0 Units
200.0 mUnits/
1
171.22 Ω –04.438 Ω
hp
∗
C
MARKER 1
45.0 MHz
D
1
1
: 45 MHz
2
: 100 MHz
2
START
STOP
FREQUENCY
MHz
MAG
S22
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.542
.602
.616
.605
.609
.616
.620
.622
.619
.610
.626
.623
–1.4
–.3
0.0
1.1
.7
.3
.1
0.0
.6
.9
–.7
–1.7
FREQUENCY
MHz
MAG
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.590
.604
.610
.607
.548
.630
.615
.618
.617
.616
.623
.624
.4
–1.0
–1.1
–.8
–5.9
–0.0
–1.0
–1.4
–1.2
–2.2
–2.4
–2.3
0.045000000 GHz
0.100000000 GHz
PPB1506GV
S22 vs. OUTPUT FREQUENCY
Divide by 128 mode, VCC = 5.0 V
Z
S22
REF 1.0 Units
200.0 mUnits/
1
192.34 Ω 03.109 Ω
hp
C
MARKER 1
45.0 MHz
D
1
2
START
STOP
10
0.045000000 GHz
0.100000000 GHz
1
: 45 MHz
2
: 100 MHz
S22
PPB1506GV, PPB1507GV
PPB1506GV
S22 vs. OUTPUT FREQUENCY
Divide by 256 mode, VCC = 5.0 V
Z
S22
REF 1.0 Units
200.0 mUnits/
1
199.25 Ω –05.992 Ω
hp
C
MARKER 1
45.0 MHz
D
1
1
: 45 MHz
2
: 100 MHz
2
START
STOP
FREQUENCY
MHz
MAG
S22
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.601
.609
.611
.620
.607
.615
.613
.611
.607
.605
.610
.608
–.9
–1.6
–1.5
–1.4
–2.1
–1.9
–3.2
–2.8
–2.5
–2.4
–3.0
–2.8
FREQUENCY
MHz
MAG
ANG
500.0000
600.0000
700.0000
800.0000
900.0000
1000.0000
1100.0000
1200.0000
1300.0000
1400.0000
1500.0000
1600.0000
1700.0000
1800.0000
1900.0000
2000.0000
2100.0000
2200.0000
2300.0000
2400.0000
2500.0000
2600.0000
2700.0000
2800.0000
2900.0000
3000.0000
.857
.849
.800
.764
.725
.665
.619
.573
.531
.484
.439
.377
.340
.377
.441
.464
.443
.466
.465
.454
.433
.383
.350
.332
.271
.185
–27.5
–32.0
–38.9
–43.8
–49.0
–50.9
–55.3
–59.3
–61.3
–62.8
–63.0
–59.1
–54.1
–54.7
–59.5
–67.2
–67.4
–74.5
–81.3
–89.4
–99.2
–109.6
–114.0
–124.2
–141.2
–163.6
0.045000000 GHz
0.100000000 GHz
PPB1507GV
S11 vs. INPUT FREQUENCY
VCC = 5.0 V
Z
S11
REF 1.0 Units
200.0 mUnits/
4
38.111 Ω 0.9707 Ω
hp
C
MARKER 4
3.0 GHz
D
4
1
3
2
START
STOP
0.500000000 GHz
3.000000000 GHz
1
: 500 MHz
2
: 1000 MHz
3
: 2000 MHz
4
: 3000 MHz
S11
11
PPB1506GV, PPB1507GV
PPB1507GV
S22 vs. OUTPUT FREQUENCY
Divide by 64 mode, VCC = 5.0 V
Z
S22
REF 1.0 Units
200.0 mUnits/
1
185.13 Ω 17.789 Ω
hp
C
MARKER 1
45.0 MHz
D
1
1
: 45 MHz
2
: 100 MHz
2
START
STOP
FREQUENCY
MHz
MAG
S22
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.580
.572
.574
.574
.584
.587
.592
.587
.589
.591
.573
.604
3.4
2.5
3.0
2.7
3.0
2.6
2.4
2.6
2.9
2.9
1.7
2.9
FREQUENCY
MHz
MAG
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.578
.571
.572
.576
.584
.587
.589
.589
.588
.593
.598
.602
3.2
2.8
3.3
3.0
3.1
2.8
2.4
2.8
3.0
2.8
3.0
2.9
0.045000000 GHz
0.100000000 GHz
PPB1507GV
S22 vs. OUTPUT FREQUENCY
Divide by 128 mode, VCC = 5.0 V
Z
S22
REF 1.0 Units
200.0 mUnits/
1
185.02 Ω 18.953 Ω
hp
C
MARKER 1
45.0 MHz
D
1
2
START
STOP
12
0.045000000 GHz
0.100000000 GHz
1
: 45 MHz
2
: 100 MHz
S22
PPB1506GV, PPB1507GV
PPB1507GV
S22 vs. OUTPUT FREQUENCY
Divide by 256 mode, VCC = 5.0 V
Z
S22
REF 1.0 Units
200.0 mUnits/
1
186.76 Ω 17.82 Ω
hp
C
MARKER 1
45.0 MHz
D
1
2
START
STOP
1
: 45 MHz
2
: 100 MHz
FREQUENCY
MHz
MAG
S22
ANG
45.000
50.000
55.000
60.000
65.000
70.000
75.000
80.000
85.000
90.000
95.000
100.000
.580
.572
.571
.576
.585
.590
.589
.590
.588
.597
.600
.601
3.0
2.8
2.9
2.9
3.2
2.8
2.5
2.6
2.9
2.9
3.1
3.1
0.045000000 GHz
0.100000000 GHz
13
PPB1506GV, PPB1507GV
TEST CIRCUIT
PPB1506GV
1 SW1
VCC 8
C1
C7
C2
Stray cap.
C5
2 IN
50 Ω
S.G
Monitor
OUT 7
1 MΩ
0.6 pF
C3
3 IN
SW2 6
C4
Oscilloscope
4 GND
NC 5
or Counter
OPEN
50 Ω
VCC = +5.0 V
±10 %
C6
x
SG (HP-8665A)
x
Counter (HP5350B) : To measure input sensitivity
Divide ratio setting
SW2
or
Oscilloscope
: To measure output voltage swing
SW1
COMPONENT LIST
H
L
H
1/64
1/128
L
1/128
1/256
H: Connect to VCC
PPB1506GV
PPB1507GV
C1 to C5
1 000 pF
1 000 pF
C6
10 000 pF
10 000 pF
Stray cap.
Aprox 4 pF
Aprox 5 pF
C7
3.5 pF*
2.5 pF*
* Capacitance CL = 8 pF for DUT includes
C7 value + stray capacitance on the
board and measurement equipment.
14
L: Connect to GND or OPEN
PPB1506GV, PPB1507GV
TEST CIRCUIT
PPB1507GV
C2
50 Ω
C3
1 IN
IN 8
2 VCC
NC 7
S.G
3 SW1
OPEN
SW2 6
C1
C4
4 OUT
GND 5
C5
VCC = +5.0 V ±10%
Monitor
C6
1 MΩ
0.6 pF
C7
Stray cap.
Oscilloscope
or Counter
50 Ω
x
SG (HP-8665A)
x
Counter (HP5350B) : To measure input sensitivity
Divide ratio setting
SW2
or
Oscilloscope
: To measure output voltage swing
SW1
H
L
H
1/64
1/128
L
1/128
1/256
H: Connect to VCC
L: Connect to GND or OPEN
15
PPB1506GV, PPB1507GV
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
PPB1506GV
1P
SW1
VCC
IN
C1
OUT
C6
C2
C5
C7
IN
OUT
C
4
3
C
SW2
OPEN
µ PB1506/08/09GV
PPB1507GV
IN
IN
2
C
3
SW2
C
5
C
4
C1
VCC
SW1
C
C6
1P
7
C
OUT
OUT
µ PB1507GV
EVALUATION BOARD CHARACTERS
(1) 35 Pm thick double-sided copper clad 50 u 50 u 0.4 mm
polyimide board
(2) Back side: GND pattern
(3) Solder plated patterns
(4) q
16
: Through holes
PPB1506GV, PPB1507GV
PACKAGE DIMENSIONS
8 PIN PLASTIC SSOP (UNIT: mm) (175 mil)
8
5
3˚ –3˚
+7˚
detail of lead end
1
4
4.94 ±0.2
3.2 ±0.1
0.15 –0.05
0.65
0.1±0.1
0.87 ±0.2
+0.10
1.5 ±0.1
1.8 MAX.
3.0 MAX.
0.5 ±0.2
0.575 MAX.
+0.10
0.3 –0.05
0.10 M
0.15
17
PPB1506GV, PPB1507GV
NOTE CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired operation).
(3) Keep the wiring length of the ground pins as short as possible.
(4) Connect a bypass capacitor (e.g. 10 000 pF) to the VCC pin.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered in the following recommended conditions.
Other soldering methods and
conditions than the recommended conditions are to be consulted with our sales representatives.
PPB1506GV, PPB1507GV
Soldering method
Soldering conditions
Recommended condition symbol
Infrared ray reflow
Package peak temperature: 235 qC,
Hour: within 30 s. (more than 210 qC),
Time: 3 times, Limited days: no.*
IR35-00-3
VPS
Package peak temperature: 215 qC,
Hour: within 40 s. (more than 200 qC),
Time: 3 times, Limited days: no.*
VP15-00-3
Wave soldering
Soldering tub temperature: less than 260 qC,
Hour: within 10 s.,
Time: 1 time, Limited days: no.
WS60-00-1
Pin part heating
Pin area temperature: less than 300 qC,
Hour: within 3 s./pin,
Limited days: no.*
* It is the storage days after opening a dry pack, the storage conditions are 25 qC, less than 65 % RH.
Caution The combined use of soldering method is to be avoided (However, except the pin area heating
method).
For details of recommended soldering conditions for surface mounting, refer to information document
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
18
PPB1506GV, PPB1507GV
[MEMO]
19
PPB1506GV, PPB1507GV
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this
document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on
a customer designated "quality assurance program" for a specific application. The recommended applications
of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each
device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
M4 96. 5