CEL PS9552-V

DATA SHEET
PHOTOCOUPLER
PS9552,PS9552L1,PS9552L2,PS9552L3
2.5 A OUTPUT CURRENT, HIGH CMR
IGBT GATE DRIVE PHOTOCOUPLER
8-PIN DIP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS9552, PS9552L1, PS9552L2 and PS9552L3 are optically coupled isolators containing a GaAlAs LED on the
input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip.
The PS9552 Series is designed specifically for high common mode transient immunity (CMR), high output current
and high switching speed.
The PS9552 Series is suitable for driving IGBTs and MOS FETs.
The PS9552 Series is in a plastic DIP (Dual In-line Package).
The PS9552L1 is lead bending type for long creepage distance.
The PS9552L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
The PS9552L3 is lead bending type (Gull-wing) for surface mounting.
FEATURES
PIN CONNECTION
• Long creepage distance (8 mm MIN.: PS9552L1, PS9552L2)
(Top View)
• Large peak output current (2.5 A MAX., 2.0 A MIN.)
• High speed switching (tPLH/tPHL = 0.5 μs MAX.)
8
7
6
5
1
2
3
4
• UVLO (Under Voltage Lock Out) protection with hysteresis
• High common mode transient immunity (CMH, CML = ±15 kV/μs MIN.)
SHIELD
<R>
• Ordering number of tape product: PS9552L2-E3: 1 000 pcs/reel
: PS9552L3-E3: 1 000 pcs/reel
• Safety standards
1. NC
2. Anode
3. Cathode
4. NC
5. VEE
6. VO
7. VO
8. VCC
• UL approved: File No. E72422
• CSA approved: No. CA 101391
• BSI approved: No. 8937, 8938
• SEMKO approved: No. 615433
• NEMKO approved: No. P06207243
• DEMKO approved: No. 314091
• FIMKO approved: No. FI 22827
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• IGBT, Power MOS FET Gate Driver
• Industrial inverter
• IH (Induction Heating)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Document No. PN10589EJ03V0DS (3rd edition)
Date Published October 2007 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2006, 2007
PS9552,PS9552L1,PS9552L2,PS9552L3
PACKAGE DIMENSIONS (UNIT: mm)
DIP Type
PS9552
9.25
+0.5
–0.25
7.62
+0.4
1.01–0.2
+0.5
3.5±0.2
6.5–0.1
0 to 15˚
2.54
0.5±0.15
Lead Bending Type (Gull-wing) For Surface Mount
PS9552L3
+0.5
9.25–0.25
3.5±0.2
1.01
0.5±0.15
2
0.635±0.15
9.65±0.4
+0.4
–0.2
2.54
0.74±0.25
Data Sheet PN10589EJ03V0DS
+0.5
6.5–0.1
PS9552,PS9552L1,PS9552L2,PS9552L3
Lead Bending Type For Long Creepage Distance
PS9552L1
9.25
+0.5
–0.25
10.16
+0.5
6.5–0.1
3.5±0.2
1.01
+0.4
–0.2
0 to 15˚
2.54
0.5±0.15
Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount)
PS9552L2
+0.5
9.25–0.25
11.8±0.4
3.5±0.2
0.5±0.15
+0.5
6.5–0.1
0.25±0.2
1.01
+0.4
–0.2
2.54
0.9±0.25
Data Sheet PN10589EJ03V0DS
3
PS9552,PS9552L1,PS9552L2,PS9552L3
<R>
FUNCTIONAL DIAGRAM
8
(Tr. 1)
2
7
6
(Tr. 2)
3
5
SHIELD
<R>
Input
LED
Tr. 1
Tr. 2
Output
H
ON
ON
OFF
H
L
OFF
OFF
ON
L
MARKING EXAMPLE
No. 1 pin
Mark
9552
NL731
Type Number
Assembly Lot
N L 7 31
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
PHOTOCOUPLER CONSTRUCTION
Parameter
PS9552, PS9552L3
PS9552L1, PS9552L2
Air Distance (MIN.)
7 mm
8 mm
Outer Creepage Distance (MIN.)
7 mm
8 mm
0.4 mm
0.4 mm
Isolation Distance (MIN.)
4
Data Sheet PN10589EJ03V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Packing Style
Safety Standard
Application Part
Approval
Number*
Specification
PS9552
PS9552-AX
Pb-Free
PS9552L1
PS9552L1-AX
(Ni/Pd/Au)
PS9552L2
Magazine case 50 pcs
Standard products
PS9552
(UL, CSA, BSI,
PS9552L1
PS9552L2-AX
SEMKO, NEMKO,
PS9552L2
PS9552L3
PS9552L3-AX
DEMKO, FIMKO
PS9552L3
PS9552L2-E3
PS9552L2-E3-AX
approved)
PS9552L2
PS9552L3-E3
PS9552L3-E3-AX
PS9552-V
PS9552-V-AX
PS9552L1-V
Embossed Tape 1 000 pcs/reel
1
PS9552L3
Magazine case 50 pcs
DIN EN60747-5-2
PS9552
PS9552L1-V-AX
(VDE0884 Part2)
PS9552L1
PS9552L2-V
PS9552L2-V-AX
Approved (Option)
PS9552L2
PS9552L3-V
PS9552L3-V-AX
PS9552L2-V-E3
PS9552L2-V-E3-AX
PS9552L3-V-E3
PS9552L3-V-E3-AX
PS9552L3
Embossed Tape 1 000 pcs/reel
PS9552L2
PS9552L3
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10589EJ03V0DS
5
PS9552,PS9552L1,PS9552L2,PS9552L3
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current
IF
25
mA
IF (TRAN)
1.0
A
VR
5
V
IOH (PEAK)
2.5
A
IOL (PEAK)
2.5
A
(VCC - VEE)
0 to 35
V
VO
0 to VCC
V
PC
250
mW
BV
5 000
Vr.m.s.
PT
300
mW
f
50
kHz
Operating Ambient Temperature
TA
−40 to +100
°C
Storage Temperature
Tstg
−55 to +125
°C
Diode
Peak Transient Forward
Current (Pulse Width < 1 μs)
Reverse Voltage
Detector
High Level Peak Output
Current
*1
Low Level Peak Output
Current
*1
Supply Voltage
Output Voltage
Power Dissipation
Isolation Voltage
*2
*3
Total Power Dissipation
Operating Frequency
*4
*5
*1 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2%
<R>
*2 Reduced to 4.8 mW/°C at TA = 70°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
<R>
*4 Reduced to 5.4 mW/°C at TA = 70°C or more.
*5 IOH (PEAK) ≤ 2.0 A (≤ 0.3 μs), IOL (PEAK) ≤ 2.0 A (≤ 0.3 μs)
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
MIN.
(VCC - VEE)
15
Forward Current (ON)
IF (ON)
7
Forward Voltage (OFF)
VF (OFF)
TA
Supply Voltage
Operating Ambient Temperature
6
TYP.
MAX.
Unit
30
V
16
mA
−2
0.8
V
−40
100
°C
10
Data Sheet PN10589EJ03V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA,
VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter
Diode
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA, TA = 25°C
Input Capacitance
CIN
f = 1 MHz, VF = 0 V, TA = 25°C
IOH
VO = (VCC − 4 V)
Detector High Level Output Current
*2
VO = (VCC − 15 V)
Low Level Output Current
IOL
VO = (VEE + 2.5 V)
VO = (VEE + 15 V)
<R>
TYP.
1.3
1.65
*2
*3
*4
MAX.
Unit
2.1
V
60
pF
2.0
A
2.0
A
VCC − 3.5 VCC − 2.5 VCC − 1.5
V
0.5
*3
*1
MIN.
2.0
0.5
2.0
High Level Output Voltage
VOH
IO = −100 mA
Low Level Output Voltage
VOL
IO = 100 mA
0.1
0.5
V
High Level Supply Current
ICCH
VO = open, IF = 7 to 16 mA
2.0
5.0
mA
Low Level Supply Current
ICCL
VO = open, VF = −2 to +0.8 V
2.0
5.0
mA
11.0
12.3
13.5
V
9.5
10.7
12.0
UVLO Threshold
VUVLO+
VO > 5 V, IF = 10 mA
VUVLO−
UVLO Hysteresis
Coupled Threshold Input Current
UVLOHYS VO > 5 V, IF = 10 mA
IFLH
IO = 0 mA, VO > 5 V
VFHL
IO = 0 mA, VO < 5 V
1.6
2.0
V
5.0
mA
(L → H)
<R>
Threshold Input Voltage
0.8
V
(H → L)
*1 Typical values at TA = 25°C.
*2 Maximum pulse width = 50 μs, Maximum duty cycle = 0.5%.
*3 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2%
*4 VOH is measured with the DC load current in this testing (Maximum pulse width = 2 ms, Maximum duty cycle =
20%).
Data Sheet PN10589EJ03V0DS
7
PS9552,PS9552L1,PS9552L2,PS9552L3
SWITCHING CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA,
VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter
Propagation Delay Time (L → H)
Propagation Delay Time (H → L)
Symbol
tPLH
tPHL
Pulse Width Distortion (PWD)
|tPHL−tPLH|
Propagation Delay Time (Difference
tPHL−tPLH
Conditions
Rg = 10 Ω, Cg = 10 nF, f = 10 kHz,
*2
Duty Cycle = 50%
MIN.
TYP.
0.1
0.1
*1
MAX.
Unit
0.3
0.5
μs
0.3
0.5
μs
0. 3
μs
0.35
μs
−0.35
Between Any Two Products)
Rise Time
tr
0.1
μs
Fall Time
tf
0.1
μs
UVLO (Turn On Delay)
tUVLO ON
VO > 5 V, IF = 10 mA
0.8
μs
UVLO (Turn Off Delay)
tUVLO OFF VO < 5 V, IF = 10 mA
0.6
μs
Common Mode Transient Immunity at
High Level Output
Common Mode Transient Immunity at
Low Level Output
CMH
*3
*3
TA = 25°C, IF = 10 mA,
CML
TA = 25°C, IF = 0 mA,
VO (MAX.) = 1 V, VCM = 1.5k V
*1 Typical values at TA = 25°C.
*2 This load condition is equivalent to the IGBT load at 1 200 V/75 A.
*3 Connect pin 1 and pin 4 to the LED common.
8
15
kV/μs
15
kV/μs
VO (MIN.) = 26 V, VCM = 1.5k V
Data Sheet PN10589EJ03V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
TEST CIRCUIT
Fig. 1 IOH Test Circuit
1
8
2
7 0.1 μF
3
6
IF =
7 to 16 mA 4
5
Fig. 2 IOL Test Circuit
4V
IOH
1
8
2
7 0.1 μF
3
6
4
5
VCC = 15 to 30 V
VCC =
15 to 30 V
Fig. 3 VOH Test Circuit
1
8
2
7 0.1 μF
3
6
4
5
Fig. 4 VOL Test Circuit
VOH
100 mA
VCC =
15 to 30 V
1
8
2
7
0.1 μF
3
6
VOL
4
5
VCC = 15 to 30 V
100 mA
SHIELD
SHIELD
Fig. 5 IFLH Test Circuit
IF
2.5 V
SHIELD
SHIELD
IF =
7 to 16 mA
IOL
1
8
2
7
3
6
4
5
Fig. 6 UVLO Test Circuit
0.1 μF
VO > 5 V
VCC =
15 to 30 V
1
8
IF = 10 mA 2
7
3
6
4
5
SHIELD
0.1 μF
VCC
VO > 5 V
SHIELD
Data Sheet PN10589EJ03V0DS
9
PS9552,PS9552L1,PS9552L2,PS9552L3
Fig. 7 tPLH, tPHL, tr, tf Test Circuit and Wave Forms
1
8
2
IF = 7 to 16 mA
500 Ω 3
10 kHz
50% DUTY
4
CYCLE
7
IF
0.1 μF
VO
10 Ω
10 nF
6
5
tr
VCC = 15 to 30 V
90%
50%
10%
VOUT
tPLH
SHIELD
tf
tPHL
Fig. 8 CMR Test Circuit and Wave Forms
IF
A
B
1
8
2
7
3
6
4
5
SHIELD
VCM = 1.5 kV
VCM
VCM
δV
=
Δt
δt
0.1 μF
VO
VCC = 30 V
0V
VO
(Switch A: IF = 10 mA)
VO
(Switch B: IF = 0 mA)
Remark CMR Test : Connect pin 1 and pin 4 to the LED common.
10
Data Sheet PN10589EJ03V0DS
Δt
VOH
26 V
1V
VOL
PS9552,PS9552L1,PS9552L2,PS9552L3
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
300
Detector Power Dissipation PC (mW)
Maximum Forward Current IF (mA)
30
25
20
15
10
5
0
20
40
60
100
80
200
150
100
50
20
40
60
80
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
120
100
300
Forward Current IF (mA)
Total Power Dissipation PT (mW)
250
0
120
350
250
200
150
100
10
TA = +100˚C
+85˚C
+50˚C
+25˚C
0˚C
–20˚C
–40˚C
1
0.1
50
0
20
40
60
100
80
0.01
1.0
120
1.2
1.4
1.6
1.8
2.0
2.2
Ambient Temperature TA (˚C)
Forward Voltage VF (V)
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
OUTPUT VOLTAGE vs.
FORWARD CURRENT
5.0
4.0
3.0
2.0
1.0
2.4
35
VCC = 30 V,
VEE = GND,
VO > 5 V
30
Output Voltage VO (V)
Threshold Input Current IFHL (mA)
<R>
25
20
15
10
5
0
–40
–20
0
20
40
60
80
100
0
Ambient Temperature TA (˚C)
1
2
3
4
5
Forward Current IF (mA)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10589EJ03V0DS
11
PS9552,PS9552L1,PS9552L2,PS9552L3
HIGH LEVEL OUTPUT VOLTAGE – SUPPLY
VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT
–3
–4
–5
0.5
1
1.5
2
0
1
1.5
2
Low Level Output Current IOL (A)
300
tPLH
tPHL
200
100
PWD
8
10
12
14
16
18
500
300
tPLH
tPHL
200
100
PWD
0
15
20
25
30
Forward Current IF (mA)
Supply Voltage VCC (V)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. LOAD CAPACITANCE
500
VCC = 30 V, VEE = GND,
IF = 10 mA,
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, Duty cycle = 50%
400
tPLH
300
tPHL
200
100
PWD
–20
0
20
40
60
80
100
2.5
VEE = GND, IF = 10 mA,
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, Duty cycle = 50%
400
500
VCC = 30 V, VEE = GND,
IF = 10 mA, Rg = 10 Ω,
f = 10 kHz, Duty cycle = 50%
400
tPLH
300
tPHL
200
100
0
PWD
20
40
60
80
Load Capacitance Cg (nF)
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
12
0.5
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. SUPPLY VOLTAGE
400
0
–40
1
High Level Output Current IOH (A)
VCC = 30 V, VEE = GND,
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, Duty cycle = 50%
6
2
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. FORWARD CURRENT
500
0
VCC = 30 V,
VEE = GND,
IF = 0 mA
3
2.5
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion (PWD) tPHL – tPLH (ns)
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion (PWD) tPHL – tPLH (ns)
Low Level Output Voltage VOL (V)
–2
–6
0
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion (PWD) tPHL – tPLH (ns)
4
VCC = 30 V,
VEE = GND,
IF = 10 mA
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion (PWD) tPHL – tPLH (ns)
High Level Output Voltage – Supply
Voltage VOH – VCC (V)
–1
LOW LEVEL OUTPUT VOLTAGE vs.
LOW LEVEL OUTPUT CURRENT
Data Sheet PN10589EJ03V0DS
100
120
PS9552,PS9552L1,PS9552L2,PS9552L3
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
3
ICCH (IF = 10 mA)
2.5
ICCL (IF = 0 mA)
2
1.5
–40
–20
0
20
60
80
100
VEE = GND,
VO = OPEN
3
ICCH (IF = 10 mA)
2.5
ICCL (IF = 0 mA)
2
1.5
15
20
30
Supply Voltage VCC (V)
HIGH LEVEL OUTPUT VOLTAGE – SUPPLY
VOLTAGE vs. AMBIENT TEMPERATURE
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
VCC = 30 V, VEE = GND,
IF = 10 mA, IO = –100 mA
–1
–2
–3
–4
–40
–20
0
20
40
60
80
0.25
VCC = 30 V, VEE = GND,
IF = 0 mA, IO = 100 mA
0.20
0.15
0.10
0.05
0
–40
100
–20
2
1.5
–20
0
20
40
60
80
100
4
Low Level Output Current IOL (A)
VCC = 30 V, VEE = GND,
IF = 10 mA, VCC–VO = 4 V
2.5
1
–40
20
40
60
80
100
LOW LEVEL OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
HIGH LEVEL OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
3
0
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
High Level Output Current IOH (A)
25
Ambient Temperature TA (˚C)
0
High Level Output Voltage – Supply
Voltage VOH – VCC (V)
40
High Level Supply Current ICCH (mA),
Low Level Supply Current ICCL (mA)
3.5
VCC = 30 V,
VEE = GND,
VO = OPEN
Low Level Output Voltage VOL (V)
High Level Supply Current ICCH (mA),
Low Level Supply Current ICCL (mA)
3.5
VCC = 30 V, VEE = GND,
IF = 0 mA, VO = 2.5 V
3
2
1
0
–40
–20
0
20
40
60
80
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10589EJ03V0DS
13
PS9552,PS9552L1,PS9552L2,PS9552L3
500
OUTPUT VOLTAGE vs. SUPPLY VOLTAGE
14
VCC = 30 V, VEE = GND,
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, Duty cycle = 50%
400
300
12
Output Voltage VO (V)
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion (PWD) tPHL – tPLH (ns)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. LOAD RESISTANCE
tPLH
tPHL
200
100
10
8
UVLOHYS
6
4
2
0
0
PWD
10
20
30
40
50
60
0
Load Resistance Rg (Ω)
5
10
15
Supply Voltage VCC – VEE (V)
Remark The graphs indicate nominal characteristics.
14
VUVLO+
(12.3 V)
VUVLO–
(10.7 V)
Data Sheet PN10589EJ03V0DS
20
PS9552,PS9552L1,PS9552L2,PS9552L3
TAPING SPECIFICATIONS (UNIT: mm)
4.5 MAX.
12.8±0.1
1.5 +0.1
–0
24.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
11.5±0.1
4.1±0.1
10.7±0.1
2.05±0.05
12.0±0.1
0.3±0.05
Tape Direction
PS9552L2-E3
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
21.0±0.8
100±1.0
2.0±0.5
13.0±0.2
330±2.0
<R>
25.5±1.0
29.5±1.0
Packing: 1 000 pcs/reel
Data Sheet PN10589EJ03V0DS
23.9 to 27.4
Outer edge of
flange
15
PS9552,PS9552L1,PS9552L2,PS9552L3
5.3 MAX.
10.4±0.1
7.5±0.1
1.5 +0.1
–0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
4.75±0.1
10.3±0.1
1.55±0.1
12.0±0.1
0.35±0.05
Tape Direction
PS9552L3-E3
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
21.0±0.8
100±1.0
330±2.0
2.0±0.5
13.0±0.2
17.5±1.0
21.5±1.0
Packing: 1 000 pcs/reel
16
Data Sheet PN10589EJ03V0DS
15.9 to 19.4
Outer edge of
flange
PS9552,PS9552L1,PS9552L2,PS9552L3
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
C
D
B
<R>
A
Part Number
Lead Bending
PS9552L2
lead bending type (Gull-wing)
for long creepage distance (surface mount)
PS9552L3
lead bending type (Gull-wing)
for surface mount
A
B
C
D
10.2
2.54
1.7
2.2
8.2
2.54
1.7
2.2
Data Sheet PN10589EJ03V0DS
17
PS9552,PS9552L1,PS9552L2,PS9552L3
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
18
Data Sheet PN10589EJ03V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
<R>
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the
output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
<R>
2. Board designing
(1) By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
(2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not be
closed to the LED input.
<R>
3. Make sure the rise/fall time of the forward current is 0.5 μs or less.
<R>
4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/μs or less.
5. Avoid storage at a high temperature and high humidity.
Data Sheet PN10589EJ03V0DS
19
PS9552,PS9552L1,PS9552L2,PS9552L3
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Speck
Unit
Application classification (DIN EN 60664-1 VDE0110 Part 1)
for rated line voltages ≤ 300 Vr.m.s.
IV
for rated line voltages ≤ 600 Vr.m.s.
III
Climatic test class (DIN EN 60664-1 VDE0110)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
UIORM
1 130
Vpeak
Upr
1 695
Vpeak
Upr
2 119
Vpeak
UTR
8 000
Vpeak
Upr = 1.5 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Clearance distance
Creepage distance
2
PS9552, PS9552L3
>7.0
PS9552L1, PS9552L2
>8.0
PS9552, PS9552L3
>7.0
PS9552L1, PS9552L2
>8.0
Comparative tracking index (DIN IEC 112/VDE 0303 Part 1)
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
mm
mm
175
III a
Storage temperature range
Tstg
–55 to +125
°C
Operating temperature range
TA
–40 to +85
°C
VIO = 500 V dc at TA = 25°C
Ris MIN.
10
12
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
10
11
Ω
Package temperature
Tsi
175
°C
Current (input current IF, Psi = 0)
Isi
400
mA
Power (output or total power dissipation)
Psi
700
mW
Ris MIN.
10
Isolation resistance, minimum value
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Isolation resistance
VIO = 500 V dc at TA = Tsi
20
Data Sheet PN10589EJ03V0DS
9
Ω
PS9552,PS9552L1,PS9552L2,PS9552L3
• The information in this document is current as of October, 2007. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
Data Sheet PN10589EJ03V0DS
21
PS9552,PS9552L1,PS9552L2,PS9552L3
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.