μPG2314T5N

GaAs HBT INTEGRATED CIRCUIT
PG2314T5N
D
POWER AMPLIFIER FOR BluetoothTM Class 1
UE
DESCRIPTION
The PG2314T5N is GaAs HBT MMIC for power amplifier which was developed for Bluetooth Class 1.
This device realizes high efficiency, high gain and high output power by using InGaP HBT. This device is housed
in a 6-pin plastic TSON (Thin Small Out-line Non-leaded) package. And this package is able to high-density surface
mounting.
FEATURES
: fopt = 2 400 to 2 500 MHz (2 450 MHz TYP.)
• Supply voltage
: VCC1, 2 = 2.7 to 3.6 V (3.0 V TYP.)
• Control voltage
O
NT
IN
• Operation frequency
: Vcont = 0 to 3.6 V (3.0 V TYP.)
: Vbias + Venable = 0 to 3.1 V (3.0 V TYP.)
• Circuit current
: ICC = 65 mA TYP. @ VCC1, 2 = 3.0 V, Vbias + Venable = 3.0 V, Vcont = 3.0 V,
Pin = 0 dBm
• Output power
: Pout = +20 dBm TYP. @ VCC1, 2 = 3.0 V, Vbias + Venable = 3.0 V, Vcont = 3.0 V,
Pin = 0 dBm
• Gain control range
: GCR = 23 dB TYP. @ VCC1, 2 = 3.0 V, Vbias + Venable = 3.0 V, Vcont = 0 to 3.0 V,
• High efficiency
: PAE = 50% TYP.
Pin = 0 dBm
• High-density surface mounting : 6-pin plastic TSON package (1.5  1.5  0.37 mm)
APPLICATIONS
• Power Amplifier for Bluetooth Class 1
ORDERING INFORMATION
Order Number
Package
SC
Part Number
PG2314T5N-E2
PG2314T5N-E2-A
6-pin plastic TSON
(Pb-Free)
Marking
G5D
Supplying Form
 Embossed tape 8 mm wide
 Pin 1, 6 face the perforation side of the tape
 Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
DI
Part number for sample order: PG2314T5N-A
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
Document No. PG10624EJ02V0DS (2nd edition)
Date Published February 2008 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PG2314T5N
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin Name
1
OUTPUT/VCC2
2
Vbias + Venable
3
Vcont
4
INPUT
5
VCC1
6
GND
UE
D
Pin No.
Remark Exposed pad : GND
ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified)
Parameter
Ratings
VCC1, 2
5.5
Unit
V
O
NT
IN
Supply Voltage
Symbol
Vbias +
3.6
V
Vcont
3.6
V
ICC
400
mA
Icont
0.5
mA
Pin
+10
dBm
Venable
Control Voltage
Circuit Current
Control Current
Input Power
Power Dissipation
PD
700
Note
mW
Operating Ambient Temperature
TA
40 to +85
C
Storage Temperature
Tstg
55 to +150
C
Note Mounted on double-sided copper-clad 50  50  1.6 mm epoxy glass PWB, TA = +85C
RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified)
Symbol
MIN.
TYP.
MAX.
Unit
fopt
2 400
2 450
2 500
MHz
VCC1, 2
2.7
3.0
3.6
V
Vbias +
0
3.0
3.1
V
0
3.0
3.6
V
SC
Parameter
Operating Frequency
Supply Voltage
Venable
Vcont
DI
Control Voltage
2
Data Sheet PG10624EJ02V0DS
PG2314T5N
ELECTRICAL CHARACTERISTICS
(T A = +25C, VCC1, 2 = Vbias + Venable = 3.0 V, f = 2 450 MHz, Pout = +20 dBm, External input and
output matching, unless otherwise specified)
Circuit Current
Shut Down Current
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
65
70
mA
ICC
Vcont = 3.0 V, Pin = 0 dBm

Ishut down
Vcont = 3.0 V, Pin = 0 dBm ,

D
Parameter
0
1
A
+18.0
+20.0

dBm

3.0
+1.0
dBm
Vbias + Venable = 0 V
Pout1
Vcont = 3.0 V, Pin = 0 dBm
Output Power 2
Pout2
Vcont = 0 V, Pin = 0 dBm
Gain Control Range
GCR
Vcont = 0 to 3.0 V, Pin = 0 dBm
17
23

dB
Efficiency
PAE
Vcont = 3.0 V, Pin = 0 dBm

50

%
DI
SC
O
NT
IN
UE
Output Power 1
Data Sheet PG10624EJ02V0DS
3
PG2314T5N
O
NT
IN
UE
D
EVALUATION CIRCUIT
DI
SC
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PG10624EJ02V0DS
PG2314T5N
TYPICAL CHARACTERISTICS (T A = +25C, unless otherwise specified)
O
NT
IN
UE
D
Condition : f = 2 450 MHz, VCC1 = VCC2 = Vbias + Venable = Vcont = 3.0 V, with external input and output matching circuit
SC
Condition : f = 2 450 MHz, VCC1 = VCC2 = Vbias + Venable = 3.0 V, Pin = 0 dBm, with external input and output matching circuit
DI
Remark The graphs indicate nominal characteristics.
Data Sheet PG10624EJ02V0DS
5
PG2314T5N
UE
D
Condition : f = 2 450 MHz, VCC1 = VCC2 = Vcont = 3.0 V, Pin = 0 dBm, with external input and output matching circuit
DI
SC
circuit
O
NT
IN
Condition : VCC1 = VCC2 = Vbias + Venable = Vcont = 3.0 V, Pin = 20 dBm, with external input and output matching
Remark The graphs indicate nominal characteristics.
6
Data Sheet PG10624EJ02V0DS
PG2314T5N
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS
SC
O
NT
IN
UE
D
6-PIN PLASTIC TSON (UNIT: mm)
DI
Remark The mounting pad and solder mask layouts in this document are for reference only.
Data Sheet PG10624EJ02V0DS
7
PG2314T5N
PACKAGE DIMENSIONS
SC
O
NT
IN
UE
D
6-PIN PLASTIC TSON (UNIT: mm)
DI
<R>
8
Data Sheet PG10624EJ02V0DS
PG2314T5N
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Wave Soldering
: 260C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220C or higher
: 60 seconds or less
Preheating time at 120 to 180C
: 12030 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
: 260C or below
WS260
: 10 seconds or less
Preheating temperature (package surface temperature)
: 120C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (terminal temperature)
: 350C or below
HS350
: 3 seconds or less
O
NT
IN
Soldering time (per side of device)
IR260
D
Peak temperature (package surface temperature)
Time at peak temperature
Partial Heating
Condition Symbol
UE
Infrared Reflow
Soldering Conditions
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
DI
SC
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10624EJ02V0DS
9
PG2314T5N
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
D
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
DI
SC
O
NT
IN
UE
• Do not lick the product or in any way allow it to enter the mouth.
10
Data Sheet PG10624EJ02V0DS