MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) MAXIMUM THREE PHASE MOTOR HORSEPOWER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) CONTACTOR C O O R D I N AT E D PROTECTION TYPE 2 PROTECTION .5(0.9) .5(1.1) .75(1.6) .5(2.2) 1(2.1) 1(1.7) 1.5(2.4) .5(2.5) 1.5(3.0) .75(3.2) BUSSMANN/ SQUARE D COMPANY .75(1.3) 2(2.7) .75(3.7) 2(3.4) 3(3.9) 1(4.8) IEC 1(4.2) 1.5(6.0) 1.5(6.0) 3(4.8) 5(6.1) 1.5(6.9) 2(7.8) 2(7.8) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 2(6.8) 5(7.6) 5(7.6) 3(9.6) 3(9.6) 3(11.0) 7.5(9.0) 7.5(9.0) 7.5(11.0) 10(11.0) 5(17.5) 5(17.5) 7.5(25.3) 5(15.2) 10(14.0) 7.5(22.0) 10(28.0) 15(21.0) 20(27.0) 15(42.0) 20(54.0) 20(54.0) 25(34.0) 30(40.0) 30(40.0) 40(52.0) 40(52.0) 50(65.0) 50(65.0) 15(17.0) 15(17.0) 20(22.0) 30(32.0) 10(32.2) 15(48.3) 15(48.3) 15(48.3) 20(62.1) 20(62.1) 40(41.0) 50(52.0) 50(52.0) 60(62.0) 60(62.0) 12-28-98 SB98107 Rev. A LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D09 LC1D012 LC1D012 LC1D012 LC1D018 LC1D012 LC1D018 LC1D018 LC1D025 LC1D025 LC1D032 LC1D032 LC1D032 LC1D040 LC1D040 LC1D040 LC1D050 LC1D050 LC1D065 LC1D050 LC1D065 LC1D065 LC1D080 LC1D065 LC1D080 OLR LR2D 1305 LR2D 1306 LR2D 1306 LR2D 1306 LR2D 1307 LR2D 1307 LR2D 1308 LR2D 1308 LR2D 1308 LR2D 1308 LR2D 1308 LR2D 1310 LR2D 1310 LR2D 1312 LR2D 1312 LR2D 1312 LR2D 1312 LR2D 1314 LR2D 1314 LR2D 1316 LR2D 1316 LR2D 1314 LR2D 1316 LR2D 1316 LR2D 1316 LR2D 1321 LR2D 1322 LR2D 1321 LR2D 1322 LR2D 1322 LR2D 2353 LR2D 3355 LR2D 3355 LR2D 3355 LR2D 3357 LR2D 3359 LR2D 3359 LR2D 3359 LR2D 3359 LR2D 3359 LR2D 3359 LR2D 3359 LR2D 3359 LP-CC LPJ LPN/LPS KRP-C CLASS CC CLASS J CLASS RK1 CLASS L 1.6 2.25 3 3.5 4 4.5 5 5.6 7 7.5 8 9 12 12 15 15 20 20 25 25 30 25 25 30 30 3 3 3 4 4 6 6 6 6 6 10 10 15 10 15 15 15 15 20 20 15 20 20 20 25 35 25 35 35 40 45 60 60 70 80 100 80 100 80 90 80 90 Form No. T2-SD-IEC Page 1 of 2 BIF #8113 MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) MAXIMUM THREE PHASE MOTOR HORSEPOWER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) CONTACTOR C O O R D I N AT E D PROTECTION 30(92.0) TYPE 2 PROTECTION 40(120.0) 50(150.0) 50(150.0) BUSSMANN/ SQUARE D COMPANY 60(177.0) 60(177.0) IEC 75(221.0) 75(221.0) 75(96.0) 40(104.0) 40(104.0) 50(130.0) 60(154.0) 60(154.0) 100(124.0) 125(156.0) Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 12-28-98 SB98107 Rev. A 125(125.0) 150(144.0) 150(144.0) 125(156.0) 200(192.0) 75(192.0) 75(192.0) 150(180.0) 150(180.0) 100(248.0) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. 75(77.0) 100(99.0) 100(248.0) 100(285.0) 125(312.0) 100(285.0) 200(192.0) 250(242.0) 200(240.0) 200(240.0) 250(302.0) 250(242.0) 300(289.0) 300(289.0) 250(302.0) 125(312.0) 125(359.0) 150(360.0) 200(480.0) 300(361.0) 350(414.0) 400(477.0) 250(600.0) 300(720.0) 500(590.0) 600(720.0) 350(336.0) 400(382.0) 500(472.0) 600(576.0) 800(770.0) LC1F115 LC1F115 LC1F115 LC1F115 LC1F150 LC1F185 LC1F185 LC1F185 LC1F265 LC1F265 LC1F265 LC1F265 LC1F265 LC1F330 LC1F400 LC1F330 LC1F400 LC1F400 LC1F400 LC1F400 LC1F400 LC1F400 LC1F500 LC1F500 LC1F500 LC1F500 LC1F630 LC1F630 LC1F630 OLR LR2D 3363 LR2F 5367 LR2F 5367 LR2F 5369 LR2F 5569 LR2F 5569 LR2F 5571 LR2F 5571 LR2F 6573 LR2F 5571 LR2F 5571 LR2F 6571 LR2F 6573 LR2F 6573 LR2F 6575 LR2F 6573 LR2F 6573 LR2F 6575 LR2F 6575 LR2F 6577 LR2F 6577 LR2F 6577 LR2F 6577 LR2F 6577 LR2F 7579 LR2F 7579 LR2F 7581 LR2F 7581 LR2F 8583 LP-CC LPJ LPN/LPS KRP-C CLASS CC CLASS J CLASS RK1 CLASS L 150 200 225 225 250 300 300 350 350 400 400 400 450 450 450 500 500 600 600 600 600 600 125 200 200 225 250 250 300 350 350 350 350 350 400 450 450 500 500 500 600 601 650 700 700 800 800 1000 1200 1350 1600 Form No. T2-SD-IEC Page 2 of 2 BIF #8113 MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) MAXIMUM THREE PHASE MOTOR HORSEPOWER STARTER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) SIZE CATALOG # HEATER C O O R D I N AT E D PROTECTION .5(1.1) .75(1.3) .75(1.6) 1(1.7) TYPE 2 PROTECTION BUSSMANN/ SQUARE D COMPANY .5(2.2) 1(2.1) .5(2.5) .75(3.7) 1.5(2.4) 1.5(2.4) 2(2.7) 2(2.7) .75(3.2) 1.5(3.0) 1.5(3.0) 2(3.4) 2(3.4) NEMA 3(3.9) 1(4.2) 1(4.8) 3(4.8) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 1.5(6.0) 1.5(6.0) 2(6.8) 1.5(6.9) 1.5(6.9) 2(7.8) 5(6.1) 5(7.6) 7.5(9.0) 3(9.6) 3(11.0) 7.5(11.0) 10(14.0) 10(11.0) 5(15.2) 15(17.0) 5(17.5) 15(21.0) 7.5(22.0) 20(22.0) 7.5(25.3) 20(27.0) 10(28.0) 25(27.0) 00 00 00 00 00 00 0 00 0 00 0 00 0 0 00 00 0 00 0 0 00 0 0 1 0 0 1 1 1 2 1 2 1 2 1 2 2 SA012V02S SA012V02S SA012V02S SA012V02S SA012V02S SA012V02S SB02V02S SA012V02S SB02V02S SA012V02S SB02V02S SA012V02S SB02V02S SB02V02S SA012V02S SA012V02S SB02V02S SA012V02S SB02V02S SB012V02S SA012V02S SB02V02S SB02V02S SC03V02S SB02V02S SB02V02S SC03V02S SC03V02S SC03V02S SD01V02S SC03V02S SD01V02S SC03V02S SD01V02S SC03V02S SD01V02S SD01V02S B1.67 B2.10 B2.40* B2.65* B3.30 B3.70* B3.70* B4.15 B4.15 B4.85 B4.85 B4.85 B4.85 B6.25 B6.90 B7.70* B7.70* B10.2 B10.2 B11.5* B11.5* B11.5* B12.8 B15.5 B15.5 B19.5 B19.5 B25 B28.0 B28.0 B32 B36 B45 B40 B50 B45 B50 LPN/LPS LPJ LP-CC CLASS RK1 CLASS J CLASS CC 1.6 2 2 2 2.8 2.8 2.8 2.8 2.8 4 4 4 4 6 7 7 8 10 10 12 10 12 15 15 17.5 17.5 17.5 20 25 25 25 30 35 35 40 40 45 2 2.5 2.5 2.5 4 4 4 5 5 6 6 6 6 8 8 8 9 12 12 15 12 15 15 17.5 17.5 20 20 25 30 30 30 35 45 40 45 45 50 2.25 3 3 3 4.5 4.5 4.5 6.25 6 7.5 8 7.5 8 10 10 10 12 12 20 20 12 20 25 30 * These overloads were not tested. Maximum fuse sizes are for the lower value of overload which was tested. 12-28-98 SB98107 Rev. A Form No. T2-SD-NEMA Page 1 of 2 BIF #8113 MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) MAXIMUM THREE PHASE MOTOR HORSEPOWER STARTER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) SIZE CATALOG # HEATER C O O R D I N AT E D PROTECTION 30(32.0) 10(32.2) 25(34.0) 30(40.0) TYPE 2 PROTECTION 40(41.0) 15(42.0) 15(48.3) 40(52.0) BUSSMANN/ SQUARE D COMPANY 50(52.0) 20(54.0) 60(62.0) 20(62.1) 50(65.0) 25(68.0) NEMA 60(77.0) 75(77.0) 75(96.0) 100(99.0) 25(78.2) 30(80.0) 30(92.0) 40(104.0) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. 40(120.0) 50(150.0) 60(177.0) 75(221.0) 100(124.0) 125(125.0) 50(130.0) 60(154.0) 75(192.0) 125(156.0) 150(180.0) 150(144.0) 200(192.0) 100(248.0) 200(240.0) 3 2 2 3 3 3 3 3 3 4 3 3 3 4 3 3 4 4 4 4 5 5 5 5 5 5 SE01V02S SD01V02S SD01V02S SE01V02S SE01V02S SE01V02S SE01V02S SE01V02S SE01V02S SF01V02S SE01V02S SE01V02S SE01V02S SF01V02S SE01V02S SE01V02S SF01V02S SF01V02S SF01V02S SF01V02S SG01V02S** SG01V02S** SG01V02S** SG01V02S** SG01V02S** SG01V02S** CC50.1 B62 B70 CC64.3 CC68.5 CC68.5 CC81.5 CC87.7 CC94.0 CC103 CC112 CC121 CC132 CC121 CC180 CC196 CC156 CC167 CC180 CC208 B3.00 B3.30 B3.70 B4.15 B5.50 B6.25 LPN/LPS LPJ LP-CC CLASS RK1 CLASS J CLASS CC 50 50 50 60 60 70 70 80 80 100 100 100 110 125 125 125 150 150 175 175 200 200 225 300 350 400 50 60 60 70 70 70 80 90 90 100 100 100 125 125 125 150 150 175 175 200 200 200 250 300 400 400 ** Y500 Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 12-28-98 SB98107 Rev. A The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. T2-SD-NEMA Page 2 of 2 BIF #8113