MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) THREE PHASE MOTOR HORSEPOWER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) C O O R D I N AT E D PROTECTION .5(2.5) TYPE 2 PROTECTION BUSSMANN/ CUTLERHAMMER FREEDOM SERIES .75(3.7) 1(4.8) 1.5(6.9) .5(2.2) .75(3.2) 1(4.2) 1.5(6.0) 2(6.8) .5(1.1) .75(1.6) 1(2.1) 1.5(3.0) 2(3.4) 3(4.8) .75(1.3) 1(1.7) 1.5(2.4) 2(2.7) 3(3.9) 5(6.1) 5(7.6) 2(7.8) 3(9.6) 3(11.0) 7.5(11.0) 10(14.0) 7.5(9.0) 10(11.0) 5(15.2) Interchangeable Heater Starters 5(17.5) 15(17.0) 15(21.0) 7.5(22.0) IEC 7.5(25.3) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. 10(32.2) Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 12-28-98 SB98107 Rev. A 20(22.0) 10(28.0) 20(27.0) 25(34.0) 25(27.0) 30(32.0) 15(42.0) 30(40.0) 40(52.0) 40(41.0) 15(48.3) 20(54.0) 50(52.0) 20(62.1) 25(68.2) 50(65.0) 25(78.2) 30(92.0) 40(119.6) 30(80.0) 40(104.0) 50(130.0) 60(77.0) 75(96.0) 100(124.0) 60(62.0) 75(77.0) 100(99.0) 125(125.0) STARTER NUMBER HEATER NUMBER MAXIMUM LPJ/LP-CC CLASS J/CC* AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16ANSO_C AE16BNSO_C AE16BNSO_C AE16BNSO_C AE16BNSO_C AE16CNSO_C AE16DNSO_C AE16DNSO_C AE16DNSO_C AE16ENSO_C AE16ENSO_C AE16ENSO_B AE16FNSO_B AE16GNSO_B AE16HNSO_B AE16HNSO_B AE16JNSO_B AE16JNSO_B AE16KNSO_B AE16KNSO_B AE16LNSO_ AE16LNSO_ AE16MNSO_ AE16NNSO_ H2104B-3 H2105B-3 H2106B-3 H2106B-3 H2107B-3 H2107B-3 H2108B-3 H2109B-3 H2109B-3 H2110B-3 H2110B-3 H2110B-3 H2111B-3 H2111B-3 H2112B-3 H2112B-3 H2113B-3 H2113B-3 H2114B-3 H2114B-3 H2115B-3 H2115B-3 H2116B-3 H2116B-3 H2117B-3 H2116B-3 H2117B-3 H2021-3 H2022-3 H2023-3 H2024-3 3 3 6 6 6 6 10(15) 15(20) 15(20) 15(25) 17.5(25) 20 20 30 30 35 45 45 50 50 70 70 90 100 110 100 110 110 150 200 200 “_” - Empty space designates where coil suffix must be added * Amperages found within ( ) are maximum values for Class CC fuses (LP-CC) Form No. T2-CH-IEC Page 1 of 2 BIF #8110 MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) THREE PHASE MOTOR HORSEPOWER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) C O O R D I N AT E D PROTECTION .5(2.2) TYPE 2 PROTECTION .5(2.5) .75(3.7) .75(3.2) 1(4.2) .5(1.0) .75(1.6) 1(2.1) 1.5(3.0) 2(3.4) 1(4.8) BUSSMANN/ CUTLERHAMMER FREEDOM SERIES Fixed Heater Starters .75(1.3) 1(1.7) 1.5(2.4) 2(2.7) 3(3.9) 1.5(6.0) 3(4.8) 1.5(6.9) 5(6.1) 2(6.8) 5(7.6) 2(7.8) 7.5(9.0) 3(9.6) 3(11.0) 5(15.2) 7.5(11.0) 10(14.0) 5(17.5) 10(11.0) 15(17.0) 15(21.0) 7.5(22.0) IEC Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 12-28-98 SB98107 20(22.0) 7.5(25.3) Rev. A 10(28.0) 20(27.0) 25(34.0) 25(27.0) 30(32.0) 15(42.0) 30(40.0) 40(41.0) 20(54.0) 40(52.0) 25(68.2) 50(65.0) 10(32.2) 15(48.3) 50(52.0) 20(62.1) STARTER NUMBER AE17ANSO_FF AE17ANSO_FG AE17ANSO_FH AE17ANSO_FJ AE17ANSO_FK AE17ANSO_FK AE17ANSO_FL AE17ANSO_FM AE17ANSO_FM AE17ANSO_FM AE17BNSO_FN AE17BNSO_FP AE17BNSO_FP AE17CNSO_FP AE17CNSO_FQ AE17DNSO_FR AE17DNSO_FR AE17ENSO_FS AE17ENSO_FS AE17FNSO_FT AE17FNSO_FT AE17GNSO_KC AE17HNSO_KC AE17HNSO_KD AE17JNSO_KE AE17JNSO_KE AE17KNSO_KE AE17KNSO_KF HEATER NUMBER MAXIMUM LPJ/LP-CC CLASS J/CC* 2 3 3 6 6 6 10(15) 15 10(15) 15 15 17.5(25) 20 20 20 30 35 45 45 50 60 70 70 90 100 110 110 110 “_” - Empty space designates where coil suffix must be added * Amperages found within ( ) are maximum values for Class CC fuses Form No. T2-CH-IEC Page 2 of 2 BIF #8110 MOTOR CONTROLLER AND FUSE SELECTION TABLE FOR TYPE 2 PROTECTION (UL & CSA VERIFIED) MAXIMUM THREE PHASE MOTOR HORSEPOWER 200V(FLC) 230V(FLC) 460V(FLC) 575V(FLC) C O O R D I N AT E D PROTECTION .5(1.1) .5(2.5) TYPE 2 PROTECTION .5(2.2) .75(3.2) .75(1.6) 1(2.1) 1.5(3.0) .75(1.3) 1(1.7) 1.5(2.4) 2(2.7) .75(3.7) 2(3.4) 1(4.2) BUSSMANN/ CUTLERHAMMER FREEDOM SERIES 1(4.8) 1.5(6.0) 1.5(6.9) 3(3.9) 3(4.8) 2(6.8) 2(7.8) 5(7.6) NEMA 5(6.1) 3(11.0) Maximum ratings are sized based on the maximum tested value that offers Type 2 protection, or the maximum allowed by the 1996/1999 NEC®, whichever is lower. Refer to Bussmann Bulletin SPD, “Electrical Protection Handbook” for more information on Motor Circuit Protection. 3(9.6) 7.5(11.0) 7.5(9.0) 10(11.0) 5(15.2) 10(14.0) 7.5(22.0) 7.5(25.3) 15(17.0) 15(21.0) 10(32.2) 7.5(22.0) 10(28.0) 15(42.0) 20(27.0) 25(34.0) 20(22.0) 25(27.0) 30(32.0) 30(40.0) 40(41.0) 15(48.3) 20(62.1) 20(54.0) 25(78.2) 25(68.2) 30(80.0) 40(52.0) 50(65.0) 50(52.0) 60(62.0) 60(77.0) 75(77.0) 40(119.6) 50(149.5) 60(166.8) 75(220.8) 30(92.0) 40(104.0) 50(130.0) 75(96.0) 100(124.0) 125(125.0) 150(144.0) 60(145.0) 75(192.0) 100(248.0) 100(99.0) 125(156.0) 150(180.0) 200(240.0) 200(192.0) SIZE OO OO OO OO OO OO OO OO OO OO O O O O O O O O 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 STARTER CAT. # AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16ANO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16BNO_C AN16DNO_B AN16DNO_B AN16DNO_B AN16DNO_B AN16DNO_B AN16DNO_B AN16GNO_B AN16GNO_B AN16GNO_B AN16GNO_B AN16GNO_B AN16KNO_ AN16KNO_ AN16KNO_ AN16KNO_ AN16KNO_ AN16KNO_ AN16KNO_ AN16KNO_ AN16NNO_ AN16NNO_ AN16NNO_ AN16NNO_ AN16NNO_ AN16NNO_ AN16SNO_B AN16SNO_B AN16SNO_B AN16SNO_B AN16SNO_B HEATER ELEMENT LPN-RK/LPS-RK CLASS RK1 H2004B-3 H2005B-3 H2005B-3 H2006B-3 H2007B-3 H2008B-3 H2008B-3 H2008B-3 H2009B-3 H2009B-3 H2010B-3 H2008B-3 H2009B-3 H2009B-3 H2010B-3 H2010B-3 H20O9B-3 H2011B-3 H2010B-3 H2011B-3 H2012B-3 H2012B-3 H2013B-3 H2013B-3 H2012B-3 H2013B-3 H2013B-3 H2014B-3 H2015B-3 H2019-3 H2020-3 H2020-3 H2021-3 H2021-3 H2022-3 H2022-3 H2022-3 H2021-3 H2022-3 H2022-3 H2023-3 H2023-3 H2024-3 H2006B-3 H2007B-3 H2007B-3 H2007B-3 H2008B-3 2 2.8 2.8 4.5 5.6 8 7 8 10 12 15 8 10 12 17.5 15 12 20 17.5 20 30 30 45 45 35 45 45 60 70 60 80 80 100 110 125 150 175 110 150 150 200 200 200 250 300 350 400 400 “_” - Empty space designates where coil suffix must be added 12-28-98 SB98107 Rev. A The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. T2-CH-NEMA Page 1 of 1 BIF #8110