SMB Type Coaxial Connector 27DP Series FEATURE ■ 27DP series are connectors produced based on SMB type (Sub Miniature type B) specified in MIL-PRF-39012. ■ 27DP is super small size coaxial cable connectors for 50 Ω group corresponding to minimization of communication equipment. ■ Connection method is push on type, and Frequency Range fixing method cable is by crimping or soldering. DC to 3GHz Characteristic Impedance 50 Ω CONFORMING STANDARD JIS-C-5415、MIL-PRF-39012 SPECIFICATIONS Characteristic Impedance 50 Ω Rated Volatge 335VAC(r.m.s.) Dielectric Withstanding Voltage 1,000V AC(r.m.s.) for 1minute Insulation Resistance 1,000M Ω min. at 500V DC V.S.W.R. 1.2 max.（DC to 2GHz） 1.3max. ( 2 to 3GHz) Contact Resistance 6m Ω max. Operating Temperature -40 〜 +85℃ ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. RoHS Compliant Compliant MATERIAL/FINISH Item Material / Finish Shell (Body) Copper Alloy / Au or Ni Plating Contact (Male) Copper Alloy / Au Plating Contact (Female) Copper Alloy / Au Plating Insulator PTFE ※ Please ask us for the cable assemblies to assure its performance. 141125 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 27DP Series Unit：mm ○ Plug Crimp Type Applicable Cable φ6 φA Part Number L 27DP-P-1.5QEV-AA-CF 27DP-P-1.5QEW-AA-CF 1.5DS-QEHV 1.5D-QEV 1.5D-2W 1.5D-QEW Finish Assembly Outer Center Instruction Crimp Tool Conductor Conductor φA L 4.8 17.5 Ni Au 4.8 17.5 Ni Au CR-H-1160 1 CR-H-1160 27DP-SP-1.5DHQS-CR1-CF 1.5D-HQ•SUPER 4.8 18.1 Ni Au CR-H-1156 27DP-SP-2.5DHQS-CR1-CF 2.5D-HQ•SUPER 5.9 18.2 Ni Au CR-H-1163 Finish Applicable Cable Part Number φ6 φ4 Semi-Flexible Cable Type 27DP-SP-FCCAV1-SO-CF FCCAVG1 Outer Conductor Center Conductor Ni Au Assembly Instruction 12.1 ○ Right Angle Plug Crimp Type Applicable Cable 14 Part Number 27DP-LP-0.8DW-CR1-CF 0.8D-QEW 1.5DS-QEHV 27DP-LP-1.5QEV-AA-CF φA 1.5D-QEV 27DP-LP-1.5QEW-AA-CF 1.5D-QEW φA 3.4 Finish Outer Center Conductor Conductor Assembly Instruction Crimp Tool Ni Au CR-H-K0012-04 4.8 Ni Au CR-H-1160 4.8 Ni Au CR-H-1160 13.2 □6 Applicable Cable Part Number 27DP-LP-1.5DW-CR1-CF 1.5D-QEW 1.5D-HQ•SUPER 1.5D-QEV 9.3 14 27DP-LP-1.5DHQS-CR1-CF 2.5D-HQ•SUPER 27DP-LP-2.5DHQS-CR1-CF φA 2.6D-XFV-A ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 2 Assembly Crimp Tool Center Instruction Conductor L1 Outer Conductor 4.8 10.0 Ni Au 4.8 10.0 Ni Au CR-H-1156 5.9 11.0 Ni Au CR-H-1163 9.7 L1 Finish φA 2 CR-H-1156 27DP Series Unit：mm ○ Right Angle Plug 9.3 Semi-Flexible Cable Type Part Number Applicable Cable 27DP-LP-FCCAV1-SO-1-CF FCCAVG1 Finish Outer Center Conductor Conductor Ni Assembly Instruction Au 9.7 ○ Bulkhead Jack Crimp Type Part Number Applicable Cable 27DP-BJ-1.5DW-CR1-CF 1.5D-QEW Finish Outer Center Conductor Conductor Ni Assembly Instruction Au Crimp Tool CR-H-1156 +0.1 8 .2 φ5 .1 +00 .2 φ5Applicable Part Number Cable 27DP-BJ-FCCAV1-SO-CF .1FCCAVG1 +00 .1 2 +005. 2.5 以下 14.3 +0.1 1.2 0 +0.1 .2 φ5 3.43 +0.1 1.2 0 3.2 0 .1 +00 2.5 以下 3.43 Au φ φ7.9 φ6 φ6 .2 φ5 Ni +0.1 3.43 φ7.9 3.43 3.2 0 Finish Outer Center Conductor Conductor 3.2 0 19.4 +0.1 3.2 0 .1 +00 .2 φ5 +0.1 3.2 0 φ7.9 8 2.5 以下 2.5 以下 14.3 14.3 +0.1 +0.1 3.2 0 φ6 φ7.9 +0.1 φ6 19.4 8 +0.1 1.2 0 +0.1 1.2 0 φ7.9φ6 2.5 以下 φ +0.1 0 1.2 0 1.2 Panel Mounting Dimensions Semi-Flexible Cable Type 2.5 以下 3.2 0 3.2 0 +0.1 φ7.9 φ7.9 φ6 φ6 19.4 φ6 19.4 .1 +00 .1 2 +005. 8 φ7.9 2.5 以下 2.5 以下 +0.1 1.2 0 +0.1 1.2 0 .1 +00 .2 φ5 14.3 Panel Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 3 Assembly Instruction 27DP Series Unit：mm ○ Receptacle Finish Part Number 4-□0.7 7.3 27DP-SR-PC-1-CF Center Conductor Ni Au 9.8 2.54±0.05 □5.7 Outer Conductor 4-□0.7 5.08±0.1 7.3 □5.7 9.8 ＋0.1 0 2.54±0.05 ５－φ1.2 PCB Mounting Dimensions 5.08±0.1 ＋0.1 0 ５－φ1.2 2.54±0.05 5.08±0.1 27DP-SR-PC-1 2.54±0.05 5.08±0.1 5.9 PCB Mounting Dimensions φ1 φ3.08 ４－φ2.4 5.9 Finish Outer Center Conductor Conductor Part Number 27DP-SR-PC-1 27DP-SR-1-CF Ni Au 1.7 9.5 □9.5 4 3 φ1 Part Number 9.5 27DP-SR-2-CF □9.5 1.7 Panel Mounting Dimensions Part Number 5.9±0.05 φ16.8 5.8 1.65 27DP-SR2-3-CF 2 φ1 4 2-φ2.75±0.05 6.1±0.05 φ3.08 12.2 Panel Mounting Dimensions 1.65 5.8 Outer Conductor 2 4 15.5 9.5 +0.1 0 φ3.4 12.2±0.1 +0.1 0 φ1 12.2 +0.1 0 φ3.08 +0.1 0 +0.1 0 5.9±0.05 5.9±0.05 φ3.4 +0.1 0 +0.1 0 ２－φ２． ７５ ２－φ２． ７５ Panel Mounting Dimensions 12.2±0.1 6.1±0.05 2-φ2.75±0.05 +0.1 φ3.4 0 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp Panel Mounting Dimensions Au 1.5 12.7 4-φ2.4 Ni 1.5 φ16.8 9.5 □9.5 Center Conductor 1.7 5.9±0.05 φ1 φ3.08 5.9 5.9 φ3.4 1.7 Conductor 12.7 4-φ2.4 4－φ2.4 Finish Outer 1.7 4－φ2.4 5.9 φ3.08 5.9 16.5 4 Ni 15.5 9.5 Finish Center Conductor Au 27DP Series Unit：mm ○ Right Angle Receptacle 27DP-LR-PC-1-CF 9.9 4.55 Part Number Outer Conductor Finish Ni Center Conductor Au 2.5 ※ Cheap version includes die-casting 27DP-LR-PC-14, 5.08±0.1 2.54±0.05 (12) ＋0.1 2.54±0.05 (9.9) Center Conductor Au ※ Accomplished low cost by using press and molding method. (12) (φ1) 5.08±0.1 2.54±0.05 (11.1) Ni Finish 2.5 7.4 27DP-LR-PC-14 2.5 4.55 PCB Mounting Dimensions Outer Conductor 4.55 Part Number 5.08±0.1 9.9 5-φ1.2 0 ＋0.1 5-φ1.2 0 2.54±0.05 5.08±0.1 PCB Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 5 27DP Series Unit：mm ○ Right Angle Receptacle Part Number Outer Conductor 27DP-LR-PS-1-500 Finish Center Conductor Au Package Style Minimum Ordering Quantity Note Tape and Reel 500 pcs./ reel 1 reel 27DP-LR-SP-1 500pcs. Package Au ※ SMT mounting style ※ Tape and reel package is available. ※ The exposing contact tail enables you to be visible the soldering condition after reflow process. ※ Accomplished low cost by using press and molding method. ※ With regard to orders less than 500, please contact us. Connector Dimensions (7.1) 6.6 4.92 2.1±0.05 3.26±0.05 1.8±0.05 φ1.2±0.05 4.92±0.05 3.42±0.05 6.52±0.05 □5.92 1.55±0.05 1 (φ1) 1.8±0.05 1 (1.76) 0.3 (12.9) 1.55±0.05 2-φ１±0.05 0.5 3.75 27DP-LR-PS-1 PCB Mounting Dimensions Tape and Reel Dimensions 4 Ø1.5 27DP-LR-PS-1 25.5 28290 8.2 ∅80 User direction of feed 24 11.5 29.5 1.75 12 ∅330 H ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 6 2 27DP Series Unit：mm ○ Bulkhead Receptacle Part Number φA φB C D L Finish Outer Conductor Center Conductor 27DP-BR-9-CF 7.0 0.5 2.2 6.0 12.9 Ni Au 27DP-BR-11-CF 6.2 0.8 3.0 5.4 13.7 Ni Au φB φA Ｍ５×０． ５ 1 2.3 L C D ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 7 ｔｅｐ．１ 27DP Series ○ Assembly Instruction (1) Parts Configuration Outer Conductor Boot Body Body ① Show it to illustration dimensions through a boot to a cable. (Note) Be careful about the directionality of the ferrule. (Note) Please be careful to not damage the outer conductor, insulator and center conductor. Pre-soldering the center conductor. Center Conductor 2 Pre-soldering Outer Conductor 1.5 Cable Ferrule 4 Insulator 2 Boot ② Contact Center Conductor Pre-soldering Insulator ① Contact Ferrule Boot Cable Contact 1.5 Ferrule ② Soldering cable inside conductor and a contact. (Note) Please be careful to not deform the insulator by heat. (Note) When the solder is stick out, please shave the extra solder. 4 ．２ Contact Soldering No gap → ③ No gap ｅｐ．３ → ④ ３ ｔｅｐ．５ Ferrule Boot ．１ ｔｅｐ．２ Unit：mm Soldering ③ Spread the tip of the outside conductor. Spread the tip ④ Insert a cable in body assembling and cover with the ferrule which let go through beforehand on an outside conductor, Crimp. (Note）The thing by which a gap between the body assembly ferrule is less than 0.5. Spread the tip Crimping Dies A-R Crimping Dies A-R ⑤ 1.72～2.14 (body assembling - contact interval) ⑤ Cover the boot on the ferule. Boot 1.72～2.14 (body assembling - contact interval) Boot ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 8 27DP Series Unit：mm ○ Assembly Instruction (2) 部品構成 部品構成 Plate Parts Configuration Plate Body Ferrule Body Ferrule The cable length required for the cable L=L1+0.6 L1 ① Ｌ＝Ｌ２ L=L2-2.5 L1 L2 片端結線においてのケーブル必要長 Ｌ Ｌ＝Ｌ１ ＋０．６ 片端結線においてのケーブル assembly. L Ｌ＝Ｌ２ －２．５ Ｌ＝Ｌ１ ＋０．６ １－１．ケーブルにフェルールを挿入する。 L2 Ferrule １－１．ケーブルにフェルールを ① Insert the ferrule into the cable. Ferrule 工程１ ２－１．ケーブル端面を図示寸法に処理する。 Cable 注）ケーブル内部導体及び外部導体に傷を ２－１．ケーブル端面を図示寸法 付けないこと。 注）ケーブル内部導体及び 付けないこと。 ２－２．ケーブル内部導体に予備はんだを施す。 Cable Insulator 工程２ ② －２．５ Outer Conductor Center Conductor Insulator Pre-soldering Center Conductor Outer Conductor ② Handle a cable end face to illustration dimensions. Pre-soldering (Note）Please be careful to not damage the outer conductor and center conductor. Pre-solder the center conductor. ３－１．外部導体を均一に解きほぐし、先端を 2±0.2 2±0.2 5±0.2 8.6±0.2 5±0.2 ３－１．外部導体を均一に解きほ 拡げる。 拡げる。 ③ Disentangle an outside conductor uniformly and 8.6±0.2 ③ ２－２．ケーブル内部導体に予備 spread the tip. ３ 工程３ Spread the tip ④ Spread the tip Contact slit part Cable outside conductor stab expectation Cable outside conductor stab expectation Contact ④ Insert body assembling between an outside slit part conductor, insulators. (Note）Internal conductor in a contact slit more than ４－１．外部導体，絶縁体間にボディ組立を 挿入する。 half Being satisfied. ４－１．外部導体，絶縁体間にボディ組立を Body assembly (Note）Aya cover evenly over the first knurling the outer 注）内部導体がコンタクトスリットに半分 Body assembly conductor. cover with the ferrule which let go 注）内部導体がコンタクトスリットに半分 以上収まっていること。 Crimping Dies through beforehand on an outside conductor and 以上収まっていること。 A-R1 注）外部導体をアヤ目ローレット上に均一に被せる。 Soldering Crimping Dies knock it against body system ４－２． and予め通しておいたフェルールを外部導体上に被せ、 crimp it. A-R1 注）外部導体をアヤ目ローレット上に均一 Soldering (Note) The gap between body and ferrule is within 0.5. ボディ組立に突き当てかしめる。 Contact ４－２．予め通しておいたフェルールを外部導 注）ボディ組立～フェルール間の隙間は、 Solder cable inside conductor and a contact. ボディ組立に突き当てかしめる。 Contact ０．５以下のこと。 注）ボディ組立～フェルール間の隙間は (Note) Please be careful to not deform the insulator by heat. 注）かしめ後のクリンプハイトは、下図の位置にて 表１の規格を満足すること。 六角対辺 a,b,c= ４．１２～４．３５ 表１ 0.5 max. 0.15～0.3 Height after press-in ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 工程５ 9 b 0.15～0.3 Height after press-in ⑤ Compress the plate into the body. a クリンプハイト c （gap between ferrule and body） ５ ディン ３．０５～ c （gap between ferrule and 0.5 body） max. 表１ １８六角対辺 ３．０５～３． a,b,c= ４．１２～４．３５ (3)（ディンプル） b ⑤ g of cable outside conductor ０．５以下のこと。 注）かしめ後のクリンプハイトは、下図の 表１の規格を満足すること。 ディンプル 5～6 a（六角対辺） クリンプハイト 5～6 ４－３．ケーブル内部導体とコンタクトをはんだ付け する。 ４－３． ケーブル内部導体とコンタクトをはん 注）はんだの熱により絶縁体を膨張， 変形させない する。 こと。 注）はんだの熱により絶縁体を膨張，変 こと。 ５－１．プレートをボディに入れ圧縮する。 ５－１．プレートをボディに入れ圧縮する。