75 Ω SMB Style Coaxial Connector 27CP Series FEATURE Frequency Range DC to 500MHz Characteristic Impedance 75 Ω Lock Type Push On ・ 27CP series is a SMB connector which corresponding to 75 Ω . ・ Low profile coaxial connector with push on lock mechanism. It is suitable to the applications of internal equipments. ・ Push-on locking mechanism provides quick and reliable connection. ・Incompatible to 27DPseries(50 Ω SMB connector) APPLICATIONS Measurement equipments, Broadcasting, CATV, HDTV SPECIFICATIONS Characteristic Impedance 75 Ω Rated Voltage 500VAC(r.m.s.) Dielectric Withstanding Voltage 1000V AC(r.m.s.)for1 minute Insulation Resistance 1000M Ω Mim. at 500V DC Contact Resistance 6m Ω Max. Operating Temperature -40 〜 +85℃ V.S.W.R. 1.5 max. at DC to 500MHz ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. MATERIAL/FINISH Item Shell (Body) Contact (Male) RoHS Compliant Compliant Material / Finish Copper Alloy / Ni or Au Plating Copper Alloy / Au Plating Contact (Female) Copper Alloy / Au Plating Insulator 121226 PTFE ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 27CP Series Unit：mm ○ Straight Cable Plug 7.9 Applicable φ5.5 Part Number Cable 1.5C−2W Ni Au 27CP-P-2.5-CF 2.5C−2V Ni Au φA Applicable Cable φ0.65 L1 L2 CR-H-1100 7.9Outer Finish Center Assembly Crimp Tool Instruction 5.5 14.35 15.5 Ni Au CR-H-1100 27CP-LP-2.5W-CF 2.5C−2W 6.0 14.35 15.5 Ni Au CR-H-15285 27CP-LP-2.5-CF 5.5 14.40 15.5 Ni Au L1 1.5C−2WX φ8.4 2.5C−2V φA L2 1.2 2 CR-H-1100 CR-H-1100 7.9 φ8.4 5.2 L1 L1 9.5 2 7.9 φA 5.2 CR-H-1100 Au 9.5 L 1 Ni 1.5C−2W 1.2 φ8.4 CR-H-1100 5.2 φ1.4 φ5.5 φ5.5 1.2 1.2 10.7 16.5 14.8 16.5 6.5 1 Conductor Conductor ○ Straiught Balkhead Cable Jack 0.5 Au 5.5 14.40 15.5 9.5 L2 Assembly Crimp Tool Instruction L2 φA 1.5C−2V 27CP-LP-1.5W-CF 16.5 Ni 5.2 27CP-LP-1.5-CF L1 φ5.5 φA Part Number φA Conductor Conductor 27CP-P-1.5W-CF 7.9 6.5 Center 1.5C−2V ○ Right Angle Cable Plug L Finish 27CP-P-1.5-CF L1 16.5 Outer φA φ8.4 φA □0.8 Mounting Panel Thickness：2.4mm max. L2 L2 Panel Mounting Dimensions 5.5 2.5C−2V 5.5 1.27 27CP-BJ-2.5W-CF 2.5C−2W φ8.4 φ8.4 9.5 □0.8 φ8.4 9.5 7.5 15.5 6.0 ○ Straiught Bulkhead Receptacle Ni Au 17.07 Ni Au 17.10 Ni Au CR-H-1100 17.00 Ni Au CR-H-15285 5.08 4-□0.8 10.4 1 CR-H-1100 □0.8 8.0 9.5 8.0 5.08 15.5 0.1 5.08 □0.8 0.1 5.08 7.5 0.05 14.8 4-□0.8 10.4 φ8.4 9.5 2.54 2.9 7.5 10.7 10.7 14.8 0.05 φ0.97 □0.8 5.08 2.54 φ0.65 φ0.65 φ1.4 φ1.4 0.5 Mounting Panel Thickness：2.4mm max. φ8.4 Panel Mounting Dimensions 1.27 2.54 +0.1 Part 0.1 Number 5.08 8.0 10.4 27CP-BR-CF □0.8 φ0.97 φ0.97 1.27 0.1 2 1.27 7.5 5.08 5.08 0.05 4 15.5 2.54 5.08 0.1 2.54 7.5 7.5 0.05 11.511.5 15.5 0.05 2.54 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. □0.8 +0.1 Moreover, the characteristic and the specification of the published product are the reference values. 5.08 0.1 5-φ1.3 0 Please confirm the content with the latest delivery specifications when you use the product. 5.08 http://www.ddknet.co.jp □8 □0.8 □0.8 0.05 5.08 7.5 5-φ1.3 0 0.05 2.9 2.9 CR-H-1100 1.2 □8 0.5 11.5 Conductor Conductor 17.10 Assembly Crimp Tool Instruction 1.2 1.27 14.414.4 14.4 Outer □0.8 Center φ0.97 1.5C−2W 27CP-BJ-2.5-CF 9.5 6.5 5.5 5.2 27CP-BJ-1.5W-CF 7.5 φA φA 5.2 11.5 1.5C−2V 6.5 L 10.7 L 14.8 1.2 27CP-BJ-1.5-CF Finish L 5.2 5.2 0.5 Applicable φA Cable 1.2 1.2 φ0.97 φ8.4 2.9 14.4 φ0.65 φ1.4 Part Number 5.2 5.2 1.2 Outer Conductor Ni Finish Center Conductor Au 5. 2.9 ○ Right Angle Receptacle Jack Unit：mm 1.27 15.5 Part Number 5.08 7.5 □0.8 φ0.97 4-□0.8 10.4 8.0 Finish Outer Conductor 27CP-LR-PC-CF □8 Center Conductor Ni Au 0.05 0.1 1.27 5.08 2.54 7.5 8.0 2.54 0.1 4-□0.8 5.2 10.4 5.08 1.2 15.5 +0.1 5.08 φ8.4 5-φ1.3 0 2.54 □8 0.05 5.08 0.05 0.1 0.1 5-φ1.3 0 Panel Mounting Dimensions 2.54 5.2 0.1 2.54 +0.1 5.08 φ8.4 9.5 2.54 5.08 0.1 5.08 +0.1 1.2 +0.1 5-φ1.3 0 5.08 0.05 5.08 2.54 9.5 5.08 7.5 L1 11.5 L2 2.9 14.4 φA 5-φ1.3 0 0.05 5.08 0.05 0.1 □0.8 0.1 ○ Receptacle Jack φ0.97 □0.8 5.08 7.5 Part Number 27CP-R-PC-CF 1.27 5.08 7.5 10.4 5.08 0.1 2.54 0.05 8.0 2.54 +0.1 5-φ1.3 0 5.08 0.05 0.1 Panel Mounting Dimensions ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp □0.8 0.05 Series φ8.4 2.54 7.9 9.5 7.5 10.7 14.827CP φ0.97 11.5 14.4 0.5 □0.8 3 Outer Conductor Ni Finish Center Conductor Au 0.05 27CP Series Unit：mm ○ Assembly Instruction（1） ① Cut the cable as fig.1. ① The cable length require for the cable assembly L=L1+A+3 L1 3 A Part Number Ferule ② A 27CP-P-1.5-CF 6.4mm 27CP-P-2.5-CF 6.4mm 27CP-BJ-1.5W-CF 8.0mm ② Insert the ferule between outer conductor and sheath when the cable is 2.5C-2V. Insert the ferule until ferule contacts with the sheath when the cable is 1.5C-2V. 2.5C-2V Ferule 1.5C-2V ③ B C B C ③ Pick the outer conductor and turn down to the ferule. Cut the extra outer conductor along the ferule. Cut the center conductor as fig.3. Please be careful to not damage the center conductor. Pre-solder the center conductor. Part Number ④ Soldering Heat-shrinkable tube ⑤ B C 27CP-P-1.5-CF 2.0mm 1.6mm 27CP-P-2.5-CF 2.0mm 1.6mm 27CP-BJ-1.5W-CF 2.0mm 3.0mm ④ Insert the contact and solder from side hole. Please be careful to not make gap between contact and center conductor of the cable and not damage the insulator by heat. When the solder is stick out, please shave the extra solder along the contact. Insert the heat-shrinkable tube. ⑤ Insert the above contact into the body and crimp the root of the body as fig.5. Same level ⑥ ⑥ Cover the heat shrinkable tube on the root of the body and heat up. Finish ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 4 27CP Series Unit：mm ○ Assembly Instruction（2） ① Cut the cable as fig.1. ① The cable length require for the cable assembly L1 3 L=L1+15+3 15.0 Ferule ② Insert the ferule between outer conductor and sheath when the cable is 2.5C-2V. Insert the ferule until ferule contacts with the sheath when the cable is 1.5C-2V. ② Ferule ③ 2.8 2.8 ③ Pick the outer conductor and turn down to the ferule. Cut the extra outer conductor along the ferule. Cut the center conductor as fig.3. Please be careful to not damage the center conductor. Pre-solder the center conductor. ④ Insert the boot into the cable and insert the ④ center conductor into the body as fig.4. Crimp the root of the body. Rear Insulator ⑤ Soldering ⑤ Insert the rear insulator into the center conductor. Cut the center conductor in 1.6mm and presoldering. Insert the contact and solder. ⑥ Front Insulator ⑥ Insert the front insulator into the contact and twist in the interface. Cover the heat-shrinkable tube and heat up. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 5