Low Profile Push-On Coaxial Connector SSMB Series Frequency Range DC to 2GHz Characteristic Impedance 50 Ω Lock Type Push On FEATURE ・ Low profile coaxial connector with push on lock coupling which is conforms to IEC Pub. 169-19. ・ Mating heights from PCB are available in conbination SP and LR (6mm) and conbination LP and SR(11mm). CONFORMING STANDARD IEC-Pub. 169-19 SPECIFICATIONS Characteristic Impedance 50 Ω Rated Voltage 250VAC(r.m.s.) Dielectric Withstanding Voltage 500V AC(r.m.s.)for1 minute Insulation Resistance 1.000M Ω Mim. at 250V DC Contact Resistance Center Conductor 7.5m Ω Max. Outer Conductor 2.5m Ω Max. V.S.W.R. 1.3 max. at DC to 2GHz Operating Temperature -40 〜 +85℃ ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. MATERIAL/FINISH Item Shell (Body) Contact (Male) RoHS Compliant Compliant Material / Finish Copper Alloy / Au Plating Copper Alloy / Au Plating Contact (Female) Copper Alloy / Au Plating Insulator 121226 PTFE ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp SSMB Series Unit：mm φA ○ Plug Connector φ5 L φA L Outer Finish Center Conductor Conductor 0.8D-QEV 5.0 13.9 RG-196A/U 5.0 17.3 Au Au 1 CR-H-1164 SSMB-SP-1.5QEW-CF 1.5D-QEW 5.5 15.8 Au Au 2 CR-H-1133 SSMB-SP-85-SO-CF Outer Finish Center Conductor FCCAVG1 Conductor Au Au Crimp Tool SSMB-SP-196U-CF Applicable Cable Au Assembly Instruction SSMB-SP-0.8DV-CR-CF Part Number 10.5 Dimensions Applicable Cable Part Number CR-H-13510 Assembly Instruction Au ○ Right Angle Plug Connector 5.0 C A Dimensions Part Number Applicable Cable A B C SSMB-LP-0.8DQEV-CF 0.8D-QEV 7.73 3.0 13.5 SSMB-LP-196U-CF RG-196A/U 7.73 3.0 SSMB-LP-1.5QEW-CF 1.5D-QEW 8.48 4.5 Finish Outer Center Conductor Conductor Au Au 1 CR-H-1164 13.5 Au Au 1 CR-H-1164 12.4 Au Au 2 CR-H-1133 φB 5.0 Applicable Cable 8 Part Number 9.05 φ4 SSMB-LP-85-SO-CF FCCAVG1 Finish Outer Center Conductor Conductor Au Au Assembly Instruction ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 2 Assembly Crimp Tool Instruction SSMB Series Unit：mm ○ Receptacle Connector φ0.65 4-0.6 2.5 SSMB-SR-PC-CF 5.2 □5 φ0.65 4-□0.6 5.2 2.5 φ0.65 (11.73) 4-□0.6 5-φ1.2 Conductor Conductor Au Au Finish Outer Part Number SSMB-LR-PC-CF φ0.65 □5 Finish Center 9.23 2.5 0.05 Au Center Conductor Conductor Au Au 0.05 11.5 0.05 2.2 4.4 0.05 0.05 5-φ1.2 0.05 2.2 4.4 0.05 2.2 0.05 Au 5.2 (11.73) 4-□0.6 4.4 Conductor Outer SSMB-SR-PC-1-CF 9.23 2.5 5.7 5 Center Conductor 8.5 Part Number 5 Finish Outer Part Number 取付穴参考寸法 0.05 .8 φ2.15 φ0.65 4.4 2−φ2.75 6 φ1 2.2 0.05 6.1 12.2 取付穴参考寸法 PCB Mounting Dimensions 5 1.5 6.7 (13.7) 2−φ2.75 7 5.8 .8 6 φ1 Outer Part Number 12.2 φ2.15 φ0.65 SSMB-SR2-CF Conductor Conductor Au Au 0.1 1.5 6.7 (13.7) 5.8 +0.1 φ2.4 0 0.05 5 12.2 7 6.1 0.05 6.1 2-φ2.75 Finish Center PCB Mounting Dimensions 2-φ2.75 0.1 取付穴参考寸法 0.05 +0.1 φ2.4 0 12.2 http://www.ddknet.co.jp 6.1 0.05 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 3 SSMB Series Unit：mm ○ Assembly Instruction（1） ① ① Cable cutting Heat-shrinkable Tube Insert the heat-shrinkable tube and ferule into RG-196A/U Ferule the cable and cut the cable as left figure. Outer Conductor Insulator Center Conductor RG-196A/U Ferule RG-196A/U Heat-shrinkable Tube Ferule RG-196A/U Heat-shrinkable Tube Ferule Heat-shrinkable Tube Outer Conductor Insulator Outer Conductor Part Number A Outer Conductor Center Conductor Insulator B Insulator SSMB-SP-196U-CF Center Conductor Center Conductor C SSMB-LP-196U-CF A SSMB-LP-0.8DQEV-CF A B Body A B C B B C 6 8.5 10.5 6 8.5 9.5 6 8.5 9.5 C Body C ② A Body Body ② Crimping outer conductor Stretch the outer conductor of cable, insert （SP） the body and crimp the ferule on the outer （LP） conductor by dies. 0∼1 0∼1 0.5∼1 Dies Dies Dies 0.5∼1 Soldering Soldering ③ Dies Dies 0.5∼1 Dies Dies 0∼1 Dies 0∼1 0.5∼1 Center conductor must be located between contact slit. Center conductor must be located between contact slit. Center conductor must be Center located conductor must be between contact slit. located between contact slit. Contact ③ Soldering contact Contact Solder the contact with center conductor Soldering No gap Contact Soldering Contact Soldering No gap （SP） ④ 0∼1 （LP） （LP） （LP） 0∼1 0∼10∼1 （SP） （SP） （SP） No gap No gap （SP） （SP） （SP） Heat-shrinkable Tube Soldering Soldering Soldering Contact Press the plate more than 0.1. （LP） Contact Insulator Press the plate more than 0.1. Contact Contact Press the plate more than 0.1. Press the plate more than 0.1. （LP） Insulator Plate Insulator Insulator Heat-shrinkable Tube Heat-shrinkable Tube Heat-shrinkable Tube of the cable. （LP） （LP） Insert the insulator and screw the shell. Plate Plate Connector ④ Assemble connector （Recommended screw torque : 49N/㎝）. Plate In case of LP style, insert the plate and press it Heat-shrinkable Tube into the connector. Cover the root of connector with heat-shrinkable Connector Connector Connector Heat-shrinkable Tube tube and heat shrink. Heat-shrinkable Tube Heat-shrinkable Tube ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 4 SSMB Series Unit：mm ○ Assembly Instruction (2） ① ① Removing outer jacket Outer Conductor Removing outer jacket as left figure. Outer Conductor 8 Outer Jacket 8 Conductor Ferule Outer Outer Jacket ② Outer Conductor Outer Jacket Insert ferule into the cable, stretch the outer Ferule 8 Insulator Outer Jacket Ferule Center Conductor Insulator A A Dies Body Surface （SP） Dies Surface Dies DiesSurface Surface Body ④ （SP） Body Surface Dies Surface B （LP） Center Conductor Center Conductor （LP） 0.5∼1 Soldering DIes Surface Dies Body Surface No gap Soldering Contact Contact No gap （SP） （SP） No gap Contact Contact Insulator Connector ④ Crimping body surface and ⑤ Soldering contact Soldering Soldering the contact with center conductor Soldering （LP） Press the plate more than 0.1 Soldering （LP） of the cable Press the plate more than 0.1 （LP） Press the plate more than 0.1 （LP） Press the plate more than 0.1 Plate ⑥ Assemble connector Insert the insulator and screw the connector. Plate Connector Connector 4.7 Soldering Insulator Contact Insulator Contact Insulator 5.2 2.8 Center Conductor must be located between contact slit. No gap （SP） 2.8 SSMB-LP-1.5QEW-CF Center Conductor must be located DIes between contact slit. Surface Center BodyConductor Surface must be located between contact slit. Contact Soldering B SSMB-SP-1.5QEW-CF Dies DIes Surface Insert the body and crimp it by dies. Body Surface Center Conductor be Crimping body should be equal to body DIesmust Surface located between contact slit. Body Surface Dies dies surface. Contact Soldering A Dies 0.5∼1 Center Conductor 0.5∼1 （SP） Part Number （LP） 0.5∼1 ⑥ cable as left figure. （LP） Center Conductor Dies Body Surface ⑤ Cut the center conductor and insulator of the Center Conductor B B A Dies ③ Cutting cable Center Conductor B A Insulator （SP） （SP） the sleeve Sleeve Center Conductor Sleeve Insulator Insulator Dies Surface Cut off the outer conductor of the cable along Sleeve Insulator ③ conductor of the cable and insert sleeve. Sleeve Insulator Insulator ② Insert ferule and sleeve 8 Ferule （Recommended screw torque : 49N/㎝） Plate In case of LP style, insert the plate and press it into the connector. Plate Connector ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 5