CANNON STANDARD Seite 1 von 5 PRODUCT SPECIFICATION CAS21068E CAI Industrial Circular Connector 1.1 Ordering Information CAI CAI02-18T00-0200-P-B1-00 11.) Modification Code 00 = Standard 01 = FKM-Sealing 88 10.) Plating 1 = A34 Nickel 2 = A240 Zinc-Nickel 9.) Coupling Mechanism B = Bayonet coupling S = Threaded coupling 8.) Alternate Insert Position Normal position 0° = - (dash) Available positions N, W, X, Y, Z See Error! Reference source not found. Layout References 7.) Contact Type P = Pin S = Socket 6.) Number of Signal Contacts See Error! Reference source not found. Layout References 5.) Number of Power Contacts See Error! Reference source not found. Layout References 4.) Endbell Txx = Universal Endbell Mxx = Adaptor for metric cable fitting Pxx = Adaptor for Pg cable fitting Fxx = Adaptor for flex tube 3.) Shell Size 18, 20, 22, 24, 28, 32, 36 2.) Shell Style 00, 01, 02, X2, 06, 08, S6, S8, 20, 21 Bearbeitet: Geprüft: FA GWE ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Norm: Änd.-Stand: Änd.-Datum: C 4428W 16.01.2012 CANNON STANDARD Seite 2 von 5 PRODUCT SPECIFICATION CAS21068E CAI Industrial Circular Connector 1.) Series Bearbeitet: Geprüft: FA GWE ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Norm: Änd.-Stand: Änd.-Datum: C 4428W 16.01.2012 CANNON STANDARD Seite 3 von 5 PRODUCT SPECIFICATION CAS21068E CAI Industrial Circular Connector 1.) Series CAI = CA Industrial Connector 2.) Shell Style 00 = Wall Mounting Receptacle with connecting thread, threaded holes in flange, Rear Panel Mounting 80 = 90°Wall Mounting Receptacle with connecting thread, threaded holes in flange, Rear Panel Mounting 01 = Straight Plug, Cable Connection Plug 81 = 90° Plug, Cable Connection Plug 02 = Wall Mounting Receptacle, Front Panel Mounting X2 = Wall Mounting Receptacle, Front Panel Mounting with O-Ring (IPx9K) 06 = Straight Plug 08 = Plug 90° S6 = Straight Plug, Shielded S8 = Plug 90°, Shielded 20 = Wall Mounting Receptacle, Rear Panel Mounting, with thread in flange hole 21 = Wall Mounting Receptacle, Rear Panel Mounting, with through holes in flange 3.) Shell Size 18 20 22 24 28 32 36 4.) Endbell T00 = without Endbell Txx Universal Endbell (IP69K) T07 = with Universal Endbell (IP69K), straight version: #20 T09 = with Universal Endbell (IP69K), straight version: #20 T11 = with Universal Endbell (IP69K), straight version: #18, #20 T13 = with Universal Endbell (IP69K), straight version: #18, #20, #22 T14 = with Universal Endbell (IP69K), straight version: #18, #20, #22, #28 T17 = with Universal Endbell (IP69K), straight version: #20, #22, #28 T19 = with Universal Endbell (IP69K), straight version: #22, #28 T20 = with Universal Endbell (IP69K), straight version: #28 Bearbeitet: Geprüft: FA GWE ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Norm: (wire size 4,5 – 7,2mm) (wire size 6,5 – 9,3mm) (wire size 8,0 – 10,3mm) (wire size 9,0 – 12,5mm) (wire size 11,5 – 14,2mm) (wire size 14,5 – 16,6mm) (wire size 16,1 – 18,4mm) (wire size 17,8 – 20,0mm) Änd.-Stand: Änd.-Datum: C 4428W 16.01.2012 CANNON STANDARD Seite 4 von 5 PRODUCT SPECIFICATION CAS21068E CAI Industrial Circular Connector Mxx Adaptor for metric cable fitting M25 = with adaptor for metric cable fitting, thread diameter M25x1,5 ; straight version: #18, #20 M32 = with adaptor for metric cable fitting, thread diameter M32x1,5 ; straight version: #22, #24, #28 M40 = with adaptor for metric cable fitting, thread diameter M40x1,5 ; straight version: #32, #36 Pxx Adaptor for PG cable fitting straight version P13 = adaptor for PG cable fitting, thread diameter PG13,5 ; straight version: #18 P16 = adaptor for PG cable fitting, thread diameter PG16 ; straight version: #20, #22, #24 P21 = adaptor for PG cable fitting, thread diameter PG21 ; straight version: #28 P29 = adaptor for PG cable fitting, thread diameter PG29 ; straight version: #32, #36 Pxx Adaptor for PG cable fitting 90° version P16 = adaptor for PG cable fitting, thread diameter PG16 ; 90° version: #18 P21 = adaptor for PG cable fitting, thread diameter PG21 ; 90° version: #20 and #22 F01 = Adaptor for flex tube F02 = Cable clamp Bearbeitet: Geprüft: FA GWE ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Norm: Änd.-Stand: Änd.-Datum: C 4428W 16.01.2012 CANNON STANDARD Seite 5 von 5 PRODUCT SPECIFICATION CAS21068E CAI Industrial Circular Connector 10.) Plating 1 = A34 2 = A240 Nickel according CAS35009-NI01 (Standard) Zinc-Nickel, iridescent blue according CAS35022 11.) Modification Code 00 = CR-Sealing (Standard) 01 = FKM-Sealing 02 = Flow solder contact (for housing type 20 and 02) Bearbeitet: Geprüft: FA GWE ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Norm: Änd.-Stand: Änd.-Datum: C 4428W 16.01.2012