MS-Series With its high breaking capacity and current limitation the MS Manual Motor Controllers provide optimum protection for electrical motors as well as for other consumer units up to 25 amps. They are equipped with phase failure sensitivity, isolating and main switch functions. 13 ranges cover nominal rated currents from 0.1 up to 25 amps. The MS’s are temperature compensated; the trip current of the magnetic part is 12 x ln. The Manual Motor Controllers are built in accordance with IEC 947. Three Phase Adjustable Trip Economy Manual Motor Controllers with overload and short circuit protection, phase failure sensitivity according to IEC 947-4-1, DIN VDE 0660 Part 102 Rated Type/ Cat. No. Current C US E137938 Type Designation MS — (a) 016 — (b) (a) = MS - Manual Motor Controller (b) = Rated Current MS016 MS025 MS04 MS063 MS1 MS1.6 MS2.5 MS4 MS6.3 MS10 MS16 MS20 MS25 Overload Instantaneous release setting adjustment/FLA (A) (A) 0.16 0.25 0.4 0.63 1.0 1.6 2.5 4.0 6.3 10.0 16.0 20.0 25.0 0.1 - 0.16 0.16 - 0.25 0.25 - 0.4 0.4 - 0.63 0.63 - 1 1 - 16 1.6 - 2.5 2.5 - 4 4 - 6.3 6.3 - 10 10 - 16 16 - 20 20 - 25 1.92 3 4.8 7.6 12 19.2 30 48 75.6 120 192 240 300 3Ø Horsepower Rating 115V 200V 230V 480V 600V Ampere rated for motor circuits having – – – – – a full-load-amperage (FLA) not – – – – – exceeding the MS’s general purpose – – – – – rated current and a locked rotor – – – – – current not exceeding 6 – – – 1/2hp 1/2hp times the MS’s rated – – – 3/4hp 1hp current. – 1/2hp 1/2hp 1hp 11/2hp 1/2hp 3/4hp 1hp 2hp 3hp 3/4hp 11/2hp 11/2hp 3hp 5hp 1hp 2hp 3hp 5hp 71/2hp 2hp 3hp 5hp 10hp 10hp – 3hp 5hp 71/2hp 15hp 3hp 5hp 71/2hp 15hp – Maximum Voltage 600V AC (MS20 and MS25, 480V AC) Short Circuit Withstanding Rating (UL/CSA Rating) 5kA Group Short Circuit Withstanding Rating (UL/CSA Rating) 5kA Interrupting Capacity (VDE - Ratings) 0.16-6.3A: Self protected 10-25A: 6kA Mechanical Endurance 10000 on/off operations Standard Pack and Weight 1/250g (0.55lb) Terminal Size Acceptability 14-10 AWG Terminal Torque 1.8Nm (16lb. in.) Dimensions 30mm (1.18 in.) 42mm (1.65 in.) 35.5mm (1.40 in.) 45mm (1.77 in.) 80mm (3.15 in.) 76.5mm (3.01 in.) 45mm (1.77 in.) 63mm (2.48 in.) 71.5mm (2.81 in.) 75.5mm (2.97 in.) 85.5mm (3.37 in.) 34 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Accessories MS Three Phase Adjustable Trip Economy Manual Motor Controllers Auxiliary contact blocks for side mounting (3.5A/230V AC; 2A/400V AC) Width mm Contacts Type/ Cat. No. Weight g/pc. Std. Pk. 9 2NO HMS20 40 10 9 1NO + 1NC HMS11 40 10 9 1NO HMS10 35 10 9 2NC HMS02 40 10 9 1NC HMS01 35 10 Insulated Enclosure IP55 Emergency-Stop with integrated PE(N) terminal; top and bottom each have 2 metric knock-outs twist or key to release, red on yellow background Type/ Cat. No. Weight g/pc. Std. Pk. MS.G55 240 1 Release Type/ Type Cat. No. Twist Key Weight g/pc. Std. Pk. 60 65 5 5 MS.PV MS.PS2 Indicator Light Flush Mounting Enclosure IP55 with neon bulb, nominal rated voltage: 220 - 240V or 380 - 440V with integrated PE(N) terminal Type/ Cat. No. Weight g/pc. Std. Pk. MS.F55 170 1 Color Type/ Weight Std. Cat. No. g/pc. Pk. 220-240V 380-440V trans green red yellow MS.SLW2 MS.SLG2 MS.SLR2 MS.SLJ2 MS.SLW3 MS.SLG3 MS.SLR3 MS.SLJ3 10 10 10 10 5 5 5 5 Busbar Busbar 63A no spacing for 2 MS Type/Cat. No. for for 3 MS 4 MS for 5 MS G45-14-2 G45-14-3 G45-14-4 G45-14-5 with auxiliary switch (1/2 pole) G54-14-2 G54-14-3 G54-14-4 G54-14-5 spacing Power Feed Block Type/ Cat. No. Rating (A) Std. Pk. GE2-14 63A 1 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 35