DRA100 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧3 YEARS WARRANTY R R R HH H UL 1310 Class I, Div 2 EN 61558-1 EN 61558-2-16 UL 60950-1 IND. CONT. EQ. UL 508 a EN 60950-1 SELECTION CHART DRA 100 - 24 x Wattage 12 : 12V OUT / 24 : 24V OUT / 48 : 48V OUT A : SCREW TERMINAL TYPE AL : CLASS 2 POWER (24V ONLY) MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models OUTPUT CURRENT EFF. (min.) EFF. (typ.) DRA100-12A 90 ~264 VAC 100 WATTS + 12 VDC 8.4 A 82% 84% DRA100-24A 90 ~264 VAC 100 WATTS + 24 VDC 4.2 A 84% 86% DRA100-24AL 90 ~264 VAC 91 WATTS + 24 VDC 3.8 A 83% 85% DRA100-48A 90 ~264 VAC 100 WATTS + 48 VDC 2.1 A 86% 88% SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics Switching frequency Isolation voltage min. min. KHz VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC 45 Input-Output, @ 500VDC Operating at Vi nom + 71 2.5 + 85 o -40 20 Temperature coefficient Vi nom, Io min MTBF Bellcore Issue 6 @40 oC, GB Pollution degree www.chinfa.com 2014.09.09 MΩ -35 Vi nom, Io nom Installation position 60 100 Vi nom, from +61 to +71 C Non operational Dimension Cooling unit unit 3,000 / 4,242 Derating (see derating curve) Storage temperature Relative humidity Altitude during operation max. max. Vi nom, Io nom Input-Output Output-FG Isolation resistance Ambient temperature typ. typ. o C % / oC o C % RH % / oC 95 ± 0.03 12V 517,000 Hours 24V 531,000 Hours 24AL 570,000 Hours 48V 545,000 EN 60950-1 Screw terminal type 5,000 L90 x W54 x D114 Hours m mm Free air convection Vertical ( other direction may derating using ) 2 [email protected] P1 DRA100 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Absolute input max. range Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 90 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current typ. max. unit 100 240 VAC AC in 90 264 VAC DC in 120 375 VDC min. Conditions Io nom Ta min ... Ta max, Io nom A 1.65 / 0.83 47 Vi : 230 VAC, Io nom 12V 2.4 A 63 30 / 60 Hz A 18.5 W 24V 15 W 24AL 14 W 48V 14 W Input-Output 0.25 mA Input-FG 3.5 mA max. unit +1 % OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max Vi nom, Io min ...Io nom 0 Load regulation Voltage trim range % single mode ±1 % parallel mode ±5 % Vi nom, 0.8 Io nom 12V 24V 48V 12V Vi nom 11.4 22.5 22.5 47 Vi : 115 / 230 VAC , Io nom Turn on time Vi nom, Io nom Vi nom, Io nom 4.2 A @ 24Vdc / 3.5 A @ 28.5 Vdc 24AL 3.8 A @ 24Vdc / 3.7 A @ 24.5 Vdc 12V, 24V models : with 7000μF CAP Vi nom, Io nom Vi nom, Io nom 12V, 24V models : with 7000μF CAP 48V model : with 3500μF CAP Fall time Transient recovery time Vi nom, Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Power back immunity Vi nom, Io nom Vi nom, 1~0.5 Io nom Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Parallel operation Efficiency www.chinfa.com 2014.09.09 Vi nom, Io nom 0.1 Io min ~ 0.9 Io max (Except 24AL) Vi nom, Io nom, Po / Pi ms 1,000 ms 1,500 ms 150 ms 500 ms 150 ms 2 ms 50 mV 12V 18 VDC 24V 35 VDC 24AL 35 VDC 48V 63 7,000 12V, 24V VDC μF 3,500 μF 12V 10 11.2 VDC 24V 17.6 19.4 VDC 48V 37 43 VDC 12V 10 11.2 VDC 24V 17.6 19.4 VDC 48V 37 43 48V DC LOW indicator threshold after start up (Red LED) VDC VDC VDC VDC 2.1 A @ 48Vdc / 1.8 A @ 56 Vdc 15 / 30 48V model : with 3500μF CAP Rise time 14.5 28.5 24.5 56 8.4 A @ 12Vdc / 6.9 A @ 14.5 Vdc 24V 48V Hold up time % ±1 24AL Rated continuous loading typ. VDC unit 3 Up to 88%, See model list and typ efficiency curve [email protected] P2 DRA100 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics typ. min. Conditions Input fuse max. unit T3.15A / 250VAC internal Internal surge voltage protection Rated over load protection Power Rdy (for 24V model only) Over voltage protection Varistor IEC 61000-4-5 Vi nom (see typ current limited curve) 110 140 % 24AL Threshold voltage of contact closed(at start up) 102 17.6 108 % 19.4 VDC Electrical isolation Contact rating at 60VDC Vi nom, 0.8 Io nom (Auto Recovery) 500 12V VDC 15 0.3 A 16.5 VDC 24V 30 33 VDC 24AL 24.5 25.5 VDC 48V 60 66 VDC Output short circuit Fold forward Degree of protection IP20 APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (24AL model only) Recognized ISA 12.12.01 (Class I, Division 2, Groups A, B, C and D) EN 60950-1 TUV EN 61558-1, EN 61558-2-16 (meet EN 60204-1) CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 90 x 54 x 114 mm (3.6 x 2.13 x 4.49 inches) Case material Plastic Weight 430g Packing 0.51kg ; 32 / 17.5kg / 1.85CUFT MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION 114.00 [4.49] 54.00 [2.13] Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. 6 5 4 3 2 1 INSTALLATION Rdy S/P 90.00 [3.60] Vout ADJ. DC LO DC ON DRA100 N L Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range AWG24-10 (0.2~4mm2 ) flexible / solid cable, -Input connector can withstand torque at maximum 9 pound-inches. -Output connector can withstand torque at maximum 5.5 pound-inches. 8 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC GENERAL TOLERANCE 7 8 www.chinfa.com 2014.09.09 9 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] [email protected] P3 DRA100 SERIES PIN ASSIGNMENT Designation A normal open relay contact for DC ON level control (Never connect except 24AL model) V+ V - Positive output terminal Negative output terminal N L Ground this terminal to minimize high-frequency emissions Input terminals (neutral conductor, no polarity at DC input) Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED DC LO Vout ADJ. DC LOW voltage indicator LED OUT 3, 4 5, 6 7 8 Description RDY IN 1 2 OTHER PIN NO. 9 Trimmer-potentiometer for Vout adjustment Single / Parallel select switch (Except 24AL model) S/P CIRCUIT SCHEMATIC ‧Block diagram for DRA100 series L Fuse Vo + Filter N Bridge Rectifier Switching Filter Rectifier Device Y PWM Controller Current Detection Vo Single / Parallel Select 2) Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. DC ON (Green LED) DC LOW (Red LED) RDY 1) (Relay Contact) Output Level Detection Note: 1) For 24V Model Only 2) 24AL Model without this function TYP. CURRENT LIMITED CURVE Output Voltage [ % ] DRA100-24A 100 75 50 230 Vac 115 Vac 25 0 110 120 130 140 150 160 170 180 190 200 210 Output Current [ % ] DERATING CURVE TYP. EFFICIENCY CURVE DRA100-24A EFFICIENCY [ % ] Power out [ % ] 100 75 Safe Operating Area 0 -35 www.chinfa.com 2014.09.09 61 Temperature [ oC ] 71 90 85 80 75 70 65 60 55 50 45 40 45 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P4