AMR2 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION ‧3 YEARS WARRANTY R R R H H H Class I, Div 2 UL 1310 MODEL LIST a UL 60950-1 IND. CONT. EQ. UL 508 EN 60950-1 OUTPUT CURRENT EFF. (min.) EFF. (typ.) + 5 VDC 3000 mA 80% 82% 24 WATTS + 12 VDC 2000 mA 82% 84% 24 WATTS + 15 VDC 1600 mA 82% 84% 24 WATTS + 24 VDC 1000 mA 83% 85% MODEL NO. INPUT VOLTAGE AMR2-05 90~264 VAC 15 WATTS AMR2-12 90~264 VAC AMR2-15 90~264 VAC AMR2-24 90~264 VAC OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics min. Conditions typ. max. Switching frequency Isolation voltage Vi nom, Io nom Input-Output Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom Derating (see derating curve) Vi nom, from +61 C to +71 C Non operational -40 + 85 Vi nom, Io nom 20 95 Storage temperature Relative humidity 65 Temperature coefficient Vi nom, Io min MTBF Bellcore Issue 6 @40oC, GB Altitude during operation Dimension Cooling Installation position Pollution degree KHz VAC / VDC 3,000/4,242 o unit 100 MΩ + 71 -40 o 2.5 ± 0.03 o C o %/ C o C % RH % / oC 5V 866,000 Hours 12V 15V 803,000 Hours 814,000 Hours 24V 848,000 IEC 60068-2-13 4,850 Hours m mm L91 x W35 x D56.5 Free air convection Vertical ( other direction may derating using ) 2 INPUT SPECIFICATIONS Characteristics Rated input voltage Absolute input max. range Input current Rated input current Io nom Ta min ... Ta max, Io nom VAC AC in 90 264 VAC DC in 120 375 VDC Vi : 90 VAC, Io nom 5V 12V, 15V, 24V Inrush current Vi : 115 / 230 VAC , Io nom 2014.08.11 240 5V 12V, 15V, 24V Vi nom, Io nom www.chinfa.com unit 100 Vi : 115 / 230 VAC, Io nom Line frequency typ. max. min. Conditions 300 / 200 mA 450 / 270 47 mA 400 mA 600 mA 63 20 / 40 Hz A [email protected] P1 AMR2 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Power dissipation Leakage current Conditions Vi : 230 VAC, Io nom min. typ. max. unit 5V 3.5 W 12V 15V 4.3 W 4.3 W 24V 4.0 W Input-Output 0.25 mA max. unit +1 % OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Turn on time Vi nom, Io nom Vi nom, Io nom Rise time Vi nom, Io nom Vi nom, Io nom % 5.5 VDC 5 12V 15V 12 14 VDC 13.5 16.5 VDC 24 VDC 28 3A @ 5VDC / 2.7A @ 5.5VDC 2A @ 12VDC / 1.7A @ 14VDC 1.6A @ 15VDC / 1.4A @ 16.5VDC 1A @ 24VDC / 0.85A @ 28VDC 24V Vi : 115 / 230 VAC , Io nom % ±1 5V 12V 15V Hold up time % ±1 24V 5V Vi nom, typ. ms 20 / 80 with 3500 F CAP with 3500 F CAP 1,000 ms 1,500 ms 150 ms 500 ms Fall time Transient recovery time Vi nom, Io nom 150 ms Vi nom, 1~0.5 Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz 2 50 mV Power back immunity Vi nom, Io nom Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) Vi nom, Io nom 5V 7.5 VDC 12V 15V 18 VDC 22 VDC 24V 35 3,500 VDC μF 5V 3.5 4.5 VDC 12V 15V 9 10.8 VDC 11 19.2 13.5 VDC 21.6 VDC 3.5 4.5 VDC 9 10.8 VDC 11 13.5 VDC 24V 5V 12V 15V 24V Efficiency ms Vi nom, Io nom, Po / Pi VDC 19.2 21.6 Up to 85%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics min. Conditions Input fuse Internal surge voltage protection Rated over load protection Over voltage protection Output short circuit Degree of protection www.chinfa.com 2014.08.11 typ. max. unit T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Vi nom, Io nom (Auto Recovery) Varistor 160 % 5V 120 5.75 6.5 VDC 12V 15V 15 16.5 VDC 18 20 VDC 24V 30 33 Hiccup mode VDC IP20 [email protected] P2 AMR2 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310, Class 2 Power Recognized ISA 12.12.01 (Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 91 x 35 x 56.5 mm (3.58 x 1.38 x 2.22 inches) Case material Plastic Weight 130g Packing 0.17kg ; 88 / 16kg / 2.28CUFT MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove 4 3 2 1 + + 12.00 [0.47] INSTALLATION 11.00 [0.43] 45.00 [1.77] 35.00 [1.38] Vout ADJ. L N 5 6 56.50 [2.22] 49.85 [1.96] 32.50 [1.28] 52.00 [2.05] 91.00 [3.58] DC LO DC ON Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm2) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends. Use copper conductors only, 60/75 oC 91.00 [3.58] GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1, 2 - Negative output terminal + Positive output terminal L Input terminals (phase conductor, no polarity at DC input) N Input terminals (neutral conductor, no polarity at DC input) Vout ADJ. Trimmer-potentiometer for Vout adjustment DC ON Operation indicator LED DC LO DC Low indicator LED 5 OTHER 6 IN 3, 4 OUT PIN NO. www.chinfa.com 2014.08.11 Description [email protected] P3 AMR2 SERIES CIRCUIT SCHEMATIC ‧Block diagram for AMR2 series L Fuse Line Filter N Inrush Current Switching Limiter and Device rectifier Control Circuit Vo + Rectifier Vo - Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection DC ON (Green LED) DC LO (Red LED) TYP. CURRENT LIMITED CURVE Output Voltage [ % ] v AMR2-24 Hiccup mode 100 50 t Time DERATING CURVE TYP. EFFICIENCY CURVE AMR2-24 EFFICIENCY [ % ] Power out [ % ] 100 75 Safe Operating Area 0 -40 61 o Temperature [ C ] www.chinfa.com 2014.08.11 71 88 86 84 82 80 78 76 74 72 70 10 230 Vac 115 Vac 25 50 75 100 Power out [ % ] [email protected] P4