Model G100N50W4 Flange Mount Termination 100 Watts, 50Ω Description The G100N50W4 is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! General Specifications Thick Film AlN Ceramic Nickel Plated Copper -55 to +150°C (see de rating chart) • 100 Watts Resistive Element Substrate Mounting Flange Operating Temperature • DC – 3 GHz Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: • RoHS Compliant • AlN Ceramic • Non-Nichrome Resistive Element Electrical Specifications • Low VSWR Resistance Value: Power: Frequency Range: • 100% Tested Return Loss 50 Ohms, ± 2% 100 Watts DC – 3.0 GHz 25dB to 2.0 GHz 20dB to 3.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model G100N50W4 Typical Performance: G100N50W4 Power De-rating: G100N50W4 Mounting Footprint and Procedure: 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392