ROHM SML

Data Sheet
SML-11 Series
3020
(1208)
3.0×2.0mm
(t=1.6mm)
Features
Color
Type
・Side-view type
・3.0×2.0mm t=1.6mm
L
V
D
Y
M
F
P
W
Specifications
Absolute Maximum Ratings (Ta=25℃)
Electrical and Optical Characteristics (Ta=25℃)
Emitting Power
Chip
Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV
Forward Peak Forward Reverse Operating
Storage
Structure Color Dissipation Current
Current
Voltage Temperature Temperature
Max.
Min.*2 Typ. Max.*2
Min. Typ.
PD(mW) IF(mA) IFP(mA) VR(V)
Topr(℃)
Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA)
Part No.
■ SML-110VT
Red
GaAsP
on GaP
■ SML-110DT
■ SML-110YT
Yellow
■ SML-110MT
Yellowish
Green
■ SML-110FT
GaP
■ SML-110PT
625
630
635
2.2
602
605
608
3.6
6.3
10
587
590
593
2.2
6.3
569
572
575
5.6
16
562
565
568
3.6
10
557
560
563
2.2
6.3
2
Orange
70
25
60*1
2.1
4
-30 to +85
-40 to +85
20
100
4
2.2
Green
Green
20
20
*1:Duty1/5, 200Hz / *2:Reference
Dimensions
Recommended Solder Pattern Viewing Angle
3.0
2.3
SML-11 Series
1.6
0.3 0.8
Directivity (deg)
ANGULAR DISPLACEMENT(deg)
X-Y
1.5
20°
10°
0°
30°
10°
20°
50°
80°
50
0
2.0
1.6
1.8
20°
30°
40°
50
60°
90°
100
70°
70°
80°
80°
90°
100
50
0
50
90°
100
RELATIVE
INTENSITY(%) (%)
RELATIVE
INTENSITY
1.4
RELATIVE
INTENSITY(%) (%)
RELATIVE
INTENSITY
50°
60°
70°
70°
80°
Emitting
Direction
10°
50°
60°
60°
Cathode mark
0°
40°
40°
50°
10°
30°
30°
40°
90°
100
Directivity (deg)
ANGULAR DISPLACEMENT(deg)
X’ - Y’
20°
0.3
LED
1.8
1.8
4-R0.4
1.6
2.8
Terminal
Tolerance : ±0.2
(unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
(unit : mm)
1/2
2010.05 - Rev.A
SML-11 Series
Electrical Characteristics Curves
Forward Current-Forward Voltage
Ta=25°C
FORWARD CURRENT:IF (mA)
100
■
■
■
■SML-110VT
■SML-110DT
■SML-110YT
■SML-110MT
■SML-110FT
■SML-110PT
10
1
1.0
1.5
2.0
3.0
2.5
FORWARD VOLTAGE:VF (V)
Luminous Intensity-Atmosphere Temperature
IF=20mA
RELATIVE LUMINOUS INTENSITY (a.u)
1.6
1.4
■ ■SML-110VT
■ ■SML-110DT
■SML-110YT
■SML-110MT
■ ■SML-110FT
■SML-110PT
1.2
1.0
0.8
0.6
0.4
-40
-20
0
20
40
60
80
100
ATMOSPHERE TEMPERATURE:Ta (°C)
Luminous Intensity-Forward Current
f=1kHz
RELATIVE LUMINOUS INTENSITY (a.u.)
1.5
■
■SML-110VT
■SML-110DT
■SML-110YT
■SML-110MT
■SML-110FT
■SML-110PT
■
■SML-110VT
■SML-110DT
■SML-110YT
■SML-110MT
■SML-110FT
■SML-110PT
1.0
0.5
0.0
0
5
10
15
20
25
30
PEAK FORWARD CURRENT:IF (mA)
MAXIMUM FORWARD CURRENT:IF (mA)
Derating
40
30
20
10
0
-40
-20
0
20
40
60
80
100
AMBIENT TEMPERATURE:Ta (°C)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/2
2010.05 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A