P WER CONTR L Amphenol Sine Systems’ Distributed Power & Control interconnect products provide you increased options for Power, Control and Communication connectivity on a ‘plug and play’ basis. Modular, crush-resistent, factory-molded connectors eliminate the need for hard-wired or traditional conduit installations. The strength of our interconnect systems are their simplicity. Standardization of these systems offer reduced installation, start-up and service time during routine maintenance. With the creation of these products, the reliability and performance associated with Amphenols industrial products continues to grow and help your bottom line. • Simple ‘Plug and Play’ Designs • No Tooling Required • Pipe and Wire is ELIMINATED • Eliminates Need for Trays/Raceway • Significant Cost Savings • Easily Scalable and Modular • Ideal for conveyor systems and many other types of Factory Automation applications. Power BOSS lite Amperage 30A, 25A Power & Control Distribution System 3 pole: 30A, 600VAC, 10/14AWG 4 pole: 25A, 600VAC, 10/14AWG UL Type TC-ER/STOOW, CSA STOOW High Flex and/or Shielded available FT-2 Flame Rating / RoHS Compliant Temp Rating: +105°C / UL2237 Cables, Tee’s, Receptacles: Short Circuit Rating of 65kA New! Power BOSS M40 CHECK MATE featuring TM Pin 1 Amperage 35A, 25A 4C (8 or10)AWG X 1 Shielded 14AWG Pair 8AWG: Power 35A, Signal 5A, 600V 10AWG: Power 25A, Signal 5A, 600V (High Flex avail.) UL Type TC-ER/STOOW, CSA or c(UL) STOOW FT-2 Flame Rating / RoHS Compliant Temp Rating: +105°C / UL2237 Listed Cables, Tee’s, Receptacles: Short Circuit Rating of 65kA Power BOSS Power & Control Distribution System Amperage 40A Pin 1 3 phase + GRD + Shield + 4 relay contacts 9 pin: 40A, 600V, 8/10/12AWG UL Type TC-ER, CSA AWM I/II A/B, FT-4 Flame Rating UL and CSA Listed / IP65 Rating High Flex and/or Shielded available Temp Rating: -40°C to +125°C Cables, Tee’s, Receptacles: Short Circuit Rating of 5kA (w/ 30A breaker) Female Short Circuit Rating of 100kA (w/ CC Class fuse) Male We are Amphenol Sine Systems. Standard products. Custom Solutions. www.sineco.com Amperage New! 12A, 5A 4C 13AWG X 5C 18AWG Shielded (1 pair & 1 triad) 9 pin High Flex Hybrid Cable: 600V Pin 1 Power 12A, Signal 5A UL Type TC-ER, CSA AWM I/II A/B, FT-4 Flame Rating RoHS Compliant / UL2237 Listed / Temp Rating: +90°C Cables, Tee’s, Receptacles: Short Circuit Rating of 45kA Control BOSS Hybrid Power & Communication Network Pin 1 Amperage 15A, 2A DeviceNet + Auxilliary Power 9 pin: 600V, 14/18AWG Power 15A at 40°C, Signal 2A at 40°C UL Type TC-ER 600V Class I UL and CSA Pending / IP65 Rating Temp Rating: -40°C to +125°C Female Additional Options BOSS Power Distribution System ControlPower 6 Pin / 5 Used BOSS M12 Signal Distribution System DeviceNet E-Net Male DeviceNet Distribution Boxes NFPA-79 (National Fire Protection Association) allows conduit-free, modular, soft-wired systems for industrial machinery. In addition to all the certifications and ratings listed on the front page, all of these systems are fully compliant with the NFPA-79 standard for power distribution within industrial machinery and coordination of multiple machines. NFPA-79 includes all electrical and electronic elements of the machinery operating at 600V or less: machine tools, injection molding machines, woodworking equipment, assembling machinery, material handling machinery, inspection and testing machines. For more information, refer to www.nfpa.org. Proven Global Architecture Amphenol Sine Systems’ Distributed Power and Control products have been installed on a global level. Our architecture is operating in North and South America, Africa, Europe and Asia. ArmorStart™ Alvaro Arrocha, Program Manager 1 . 8 0 0 . 3 9 4 . 7 7 3 2 Ext. 8 6 19 [email protected] © 2012 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. www.sineco.com