Micross-RetailPlus-Flyer-MYX29W640GB70ZA 2016-04 Rev1.2

MYX29W640GB70ZA
64Mb: 3V Parallel NOR Flash Embedded Memory
Advanced information. Subject to change without notice.
Features
• - Tin-lead ball metallurgy
• Supply voltage
• VCC = 2.7–3.6V (program, erase, read)
• VPP = 12V for fast program (optional)
• Asynchronous random/page read
• Page width: 4 words
• Page access: 25ns
• Random access: 70ns
• Fast program commands
• 2-word/4-byte program (without VPP = 12V)
• 4-word/8-byte program (with VPP = 12V)
• 16-word/32-byte write buffer
• Common Flash interface
• 64-bit security code
• 128-word extended memory block
• Extra block used as security block or to store
additional information
• Low power consumption: Standby and automatic
mode
• 100,000 PROGRAM/ERASE cycles per block
• Electronic signature
• Manufacturer code: 0020h
• Device summary: part number and device code
• M29W640GB: bottom boot block
227Eh + 2210h + 2200h
• Programming time
• 10μs per byte/word TYP
• Chip program time: 10 s (4-word program)
• Double word/quadruple byte program
• Memory organization
• M29W640GB 127 main blocks, 64KB each
and 8 boot blocks, 8KB each
• Program/erase controller
• Embedded byte/word program algorithms
• Program/erase suspend and resume
• Read from any block during a PROGRAM
SUSPEND operation
OptionsCode
• Package (Sn63 Pb37 solder)
ƒƒ 48-ball TFBGA (6mm x 8mm)
0.8mm pitch
• Operating Temperature
ƒƒ Industrial (-40°C ≤ Ta ≤ +85°C)
BG
ZA
IT
• Part Marking Label (L), Dot (D)
• Read or program another block during an
ERASE SUSPEND operation
• Hardware block protection
• VPP/WP# pin for fast program and write
protect
• Temporary block unprotect mode
Micron Part. No. M29W640GB70ZA6E
APRIL 26, 2016 • Revision 1.2
Micross US (Americas) 407.298.7100 • Micross UK (EMEA & ROW) +44 (0) 1603 788967 • [email protected] • www.micross.com
Form #: CSI-D-686 Document 017
MYX29W640GB70ZA • 64Mb: 3V Parallel NOR Flash Embedded Memory
Advanced information. Subject to change without notice.
APRIL 26, 2016 • Revision 1.2
Micross US (Americas) • 407.298.7100
Micross UK (EMEA & ROW) • +44 (0) 1603 788967
[email protected]
www.micross.com
Form #: CSI-D-686 Document 017