Cree® XLamp® XP-E High-Efficiency White LEDs PRODUCT DESCRIPTION XLamp® XP-E High-Efficiency White (HEW) LEDs upgrade the XLamp XP-E LED FEATURES Table of Contents • Light output and efficacy similar to Characteristics....................................... 2 XLamp XP-G LED Flux Characteristics............................... 3 to leading performance levels for diffuse • Maximum drive current: 1000 mA Relative Spectral Power Distribution.... 5 lighting applications. The XP-E HEW is • Low thermal resistance: 6 °C/W Relative Flux vs. Junction designed to enable faster adoption of LED • Maximum junction temperature: Temperature........................................... 6 light in cost-sensitive, consumer lighting 150 °C Electrical Characteristics....................... 6 products. Compared to the standard • Wide viewing angle: 120° Relative Flux vs. Current........................ 7 XLamp XP-E LED, the XP-E HEW can • Reflow solderable - JEDEC Relative Chromaticity vs. Current.......... 7 reduce LED count by 50% and still deliver J-STD‑020C compatible the same system performance. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, color‑changing, portable including and personal, Relative Chromaticity vs. • Electrically neutral thermal path Temperature........................................... 8 • RoHS and REACh compliant Typical Spatial Distribution.................... 8 • UL® recognized component Thermal Design...................................... 9 (E349212) Performance Groups - Luminous Flux.. 9 Performance Groups - Chromaticity... 10 Performance Groups - Forward outdoor, indoor‑directional, transportation, Voltage.................................................. 12 stage Cree’s Standard Chromaticity and studio, commercial emergency‑vehicle lighting. and Regions Plotted on the 1931 CIE Curve..................................................... 13 Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................... 14 Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.......................... 15 Cree’s Standard Chromaticity Kits...... 16 www.cree.com/Xlamp Bin and Order Code Formats............... 16 Reflow Soldering Characteristics........ 17 Notes.................................................... 18 Mechanical Dimensions...................... 20 Tape and Reel....................................... 21 Packaging............................................. 22 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 CLD-DS34 Rev 8 Product family data sheet XLamp ® XP-E High‑Efficiency White LED Characteristics Characteristics Unit Thermal resistance, junction to solder point - white °C/W 6 degrees 120 mV/°C -3 Viewing angle (FWHM) - white Temperature coefficient of voltage - white ESD classification (HBM per Mil-Std-883D) DC forward current - white Minimum Typical Maximum Class 2 mA 1000 Reverse voltage V 5 Forward voltage (@ 350 mA) - white V 3.0 Forward voltage (@ 700 mA) - white V 3.15 Forward voltage (@ 1000 mA) - white V 3.25 LED junction temperature °C 3.5 150 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® XP-E High‑Efficiency White LED Flux Characteristics (TJ = 25 °C) The following tables provide order codes for XLamp XP-E HEW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 16). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 16). Chromaticity Kit 51 Chromaticity Kit E3 F4 E4 F5 E5 CCT 5000 K 4750 K 4500 K 4250 K 4000 K CCT 6200 K 53 6000 K 50 6200 K Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) 68 CRI Typical R5 139 XPEHEW-L1-0000-00H51 XPEHEW-L1-0000-00G51 R4 130 R3 122 XPEHEW-L1-0000-00F51 R5 139 XPEHEW-L1-0000-00H53 R4 130 XPEHEW-L1-0000-00G53 R3 122 XPEHEW-L1-0000-00F53 R3 122 XPEHEW-L1-0000-00F50 Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) 70 CRI Typical R4 130 XPEHEW-01-0000-00GE3 75 CRI Typical R3 122 XPEHEW-01-0000-00FE3 XPEHEW-L1-0000-00FE3 R2 114 XPEHEW-01-0000-00EE3 XPEHEW-L1-0000-00EE3 Q5 107 R4 130 R3 122 XPEHEW-01-0000-00FF4 XPEHEW-L1-0000-00FF4 R2 114 XPEHEW-01-0000-00EF4 XPEHEW-L1-0000-00EF4 Q5 107 R4 130 XPEHEW-L1-0000-00DE3 XPEHEW-01-0000-00GF4 XPEHEW-L1-0000-00DF4 XPEHEW-01-0000-00GE4 R3 122 XPEHEW-01-0000-00FE4 XPEHEW-L1-0000-00FE4 R2 114 XPEHEW-01-0000-00EE4 XPEHEW-L1-0000-00EE4 Q5 107 R4 130 XPEHEW-01-0000-00GF5 R3 122 XPEHEW-01-0000-00FF5 XPEHEW-01-0000-00EF5 R2 114 Q5 107 R4 130 80 CRI Minimum XPEHEW-L1-0000-00DE4 XPEHEW-L1-0000-00FF5 XPEHEW-L1-0000-00EF5 XPEHEW-L1-0000-00DF5 XPEHEW-01-0000-00GE5 R3 122 XPEHEW-01-0000-00FE5 XPEHEW-L1-0000-00FE5 R2 114 XPEHEW-01-0000-00EE5 XPEHEW-L1-0000-00EE5 XPEHEW-H1-0000-00EE5 Q5 107 XPEHEW-L1-0000-00DE5 XPEHEW-H1-0000-00DE5 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp XP-E HEW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® XP-E High‑Efficiency White LED Flux Characteristics (TJ = 25 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Order Codes Kit CCT Code Flux (lm) R2 114 XPEHEW-01-0000-00EF6 XPEHEW-L1-0000-00EF6 XPEHEW-H1-0000-00EF6 F6 3750 K Q5 107 XPEHEW-01-0000-00DF6 XPEHEW-L1-0000-00DF6 XPEHEW-H1-0000-00DF6 Q4 100 XPEHEW-L1-0000-00CF6 XPEHEW-H1-0000-00CF6 R2 114 XPEHEW-01-0000-00EE6 XPEHEW-L1-0000-00EE6 Q5 107 XPEHEW-01-0000-00DE6 XPEHEW-L1-0000-00DE6 XPEHEW-H1-0000-00DE6 Q4 100 XPEHEW-L1-0000-00CE6 XPEHEW-H1-0000-00CE6 R2 114 XPEHEW-01-0000-00EF7 Q5 107 XPEHEW-01-0000-00DF7 XPEHEW-L1-0000-00DF7 XPEHEW-H1-0000-00DF7 Q4 100 XPEHEW-01-0000-00CF7 XPEHEW-L1-0000-00CF7 XPEHEW-H1-0000-00CF7 Q3 93.9 XPEHEW-L1-0000-00BF7 XPEHEW-H1-0000-00BF7 P3 73.9 E6 F7 E7 F8 E8 3500 K 3250 K 3000 K 2850 K 2700 K 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum R2 114 XPEHEW-01-0000-00EE7 Q5 107 XPEHEW-01-0000-00DE7 XPEHEW-L1-0000-00DE7 Q4 100 XPEHEW-01-0000-00CE7 XPEHEW-L1-0000-00CE7 XPEHEW-H1-0000-00CE7 Q3 93.9 XPEHEW-L1-0000-00BE7 XPEHEW-H1-0000-00BE7 Q2 87.4 XPEHEW-P1-0000-00AE7 XPEHEW-U1-0000-00AE7 P4 80.6 XPEHEW-P1-0000-009E7 XPEHEW-U1-0000-009E7 Q5 107 XPEHEW-01-0000-00DF8 Q4 100 XPEHEW-01-0000-00CF8 Q3 93.9 XPEHEW-L1-0000-00BF8 XPEHEW-H1-0000-00BF8 Q2 87.4 XPEHEW-L1-0000-00AF8 XPEHEW-H1-0000-00AF8 XPEHEW-P1-0000-00AF8 XPEHEW-U1-0000-00AF8 P4 80.6 XPEHEW-P1-0000-009F8 XPEHEW-U1-0000-009F8 P3 73.9 XPEHEW-P1-0000-008F8 XPEHEW-U1-0000-008F8 Q5 107 XPEHEW-01-0000-00DE8 Q4 100 XPEHEW-01-0000-00CE8 Q3 93.9 XPEHEW-L1-0000-00BE8 XPEHEW-H1-0000-00BE8 Q2 87.4 XPEHEW-L1-0000-00AE8 XPEHEW-H1-0000-00AE8 XPEHEW-L1-0000-00CF8 XPEHEW-P1-0000-00BE7 XPEHEW-H1-0000-00CF8 XPEHEW-L1-0000-00CE8 XPEHEW-P1-0000-00AE8 P4 80.6 XPEHEW-P1-0000-009E8 XPEHEW-U1-0000-009E8 P3 73.9 XPEHEW-P1-0000-008E8 XPEHEW-U1-0000-008E8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp XP-E HEW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® XP-E High‑Efficiency White LED Relative Spectral Power Distribution 100 Relative Spectral Power Relative Radiant Power (%) 80 60 Cool White Neutral White 40 Warm & 80 CRI White 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) 100 Relative Radiant Power (%) roboto-the only graph here that is 80 60 Outdoor White 85 & 90 CRI White 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® XP-E High‑Efficiency White LED Relative Flux vs. Junction Temperature (IF = 350 mA) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Electrical Characteristics (Tj = 25ºC) Electrical Characteristics (TJ = 25 °C) 1000 900 Forward Current (mA) 800 700 600 500 400 300 200 100 0 2.00 2.25 2.50 2.75 3.00 3.25 3.50 Forward Voltage (V) Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® XP-E High‑Efficiency White LED Relative Intensity vs. Current (Tj = 25ºC) Relative Flux vs. Current (TJ = 25 °C) 250% Relative Luminous Flux 200% 150% 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Warm White Relative Chromaticity vs. Current - Warm White 0.020 0.015 0.010 0.005 0.000 ∆CCx -0.005 ∆CCy -0.010 -0.015 -0.020 100 200 300 400 500 600 700 800 900 1000 Current (mA) 0.020 0.015 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 0.010 0.005 7 -0.010 -0.015 -0.020 100 200 300 400 500 600 700 XLamp ® XP-E High‑Efficiency White LED 800 900 1000 Current (mA) Relative Chromaticity vs. Temperature -Warm White 0.020 0.015 0.010 0.005 0.000 ∆CCx -0.005 ∆CCy -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (°C) Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle (º) Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® XP-E High‑Efficiency White LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end Thermal Design product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optomize lamp life and optical characteristics. 1200 Maximum Current (mA) 1000 800 600 400 Rj-a = 10°C/W Rj-a = 15°C/W 200 Rj-a = 20°C/W Rj-a = 25°C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Performance Groups - Luminous Flux XLamp XP-E HEW LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups: Group Code Minimum Luminous Flux (lm) @ 350 mA Maximum Luminous Flux (lm) @ 350 mA P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 S2 148 156 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® XP-E High‑Efficiency White LED Performance Groups - Chromaticity White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. Region 0A 0R 1A 1R 2A 2R 3A 3R 4A x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2980 0.2950 0.3009 0.3042 0.3037 0.3048 0.3130 0.3290 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3215 0.3290 0.3290 0.3300 0.3222 0.3222 0.3290 0.3300 0.3290 0.3180 0.3231 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.2984 0.3133 0.3028 0.3304 0.3048 0.3207 0.2880 0.2895 0.2970 0.2870 0.3135 0.2962 0.3210 0.2937 0.2937 0.3312 0.3005 0.3415 0.2937 0.2962 0.3207 0.3028 0.3220 0.3028 0.3304 0.3115 0.3115 0.3391 0.3130 0.3290 0.3205 0.3481 0.3213 0.3373 0.3113 0.3048 0.3113 0.3005 0.3207 0.3130 0.3415 0.3099 0.3099 0.3509 0.3196 0.3602 0.3115 0.3391 0.3028 0.3304 0.3205 0.3481 0.3115 0.3391 0.3350 0.3207 0.3417 0.3290 0.3462 0.3290 0.3538 0.3376 0.3290 0.3417 0.3371 0.3490 0.3243 0.3215 0.3243 0.3196 0.3350 0.3290 0.3602 0.3290 0.3290 0.3690 0.3290 0.3538 0.3381 0.3762 0.3376 0.3616 0.3120 0.3207 0.3462 0.3290 0.3371 0.3490 0.3451 0.3554 0.3376 0.3616 0.3463 0.3687 0.3440 0.3427 0.3366 0.3369 0.3451 0.3554 0.3371 0.3490 0.3366 0.3369 0.3381 0.3762 0.3440 0.3428 0.3429 0.3307 0.3480 0.3840 0.3463 0.3687 0.3361 0.3530 0.3245 0.3376 0.3616 0.3597 0.3548 0.3736 0.3615 0.3659 0.3641 0.3804 0.3590 0.3521 0.3512 0.3465 0.3615 0.3659 0.3530 0.3597 0B 0S 1B 1S 2B 2S 3B 3S 4B Region 0C 0T 1C 1T 2C 2T 3C 4C Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3009 0.3042 0.3220 0.3037 0.2937 0.3312 0.3009 0.3042 0.3068 0.3113 0.3304 0.3093 0.2993 0.3391 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 0.3538 0.3290 0.3417 0.3616 0.3371 0.3490 0.3366 0.3369 0.3417 0.3290 0.3300 0.3690 0.3290 0.3300 0.3366 0.3369 0.3361 0.3245 0.3538 0.3290 0.3180 0.3463 0.3687 0.3451 0.3554 0.3551 0.3760 0.3533 0.3620 0.3533 0.3620 0.3515 0.3487 0.3451 0.3554 0.3440 0.3427 0.3641 0.3804 0.3615 0.3659 0.3736 0.3874 0.3702 0.3722 0.3702 0.3722 0.3670 0.3578 0.3615 0.3659 0.3590 0.3521 0D 0U 1D 1U 2D 2U 3D 4D Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® XP-E High‑Efficiency White LED Performance Groups - Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 5A2 5B2 Region x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3685 0.3804 0.3797 0.3782 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 5A3 5B3 Region x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3721 0.3783 0.3646 0.3837 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5A4 5B4 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 5C2 5D2 6A2 6B2 6C2 6D2 7A2 7B2 5C3 5D3 6A3 6B3 6C3 6D3 7A3 7B3 5C4 5D4 6A4 6B4 6C4 6D4 7A4 7B4 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® XP-E High‑Efficiency White LED Performance Groups - Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 x y Region x y 0.4385 0.4119 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4430 0.4212 0.4496 0.4236 0.4403 0.4259 0.4049 0.4449 0.3853 0.4300 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.4316 0.3873 0.4403 0.4049 0.4359 0.3960 0.4373 0.4418 0.3893 0.4418 0.3981 0.4465 0.4475 0.3994 0.4428 0.3906 0.4523 0.4085 0.4475 0.3994 0.4465 0.4071 0.4513 0.4164 0.4513 0.4164 0.4573 0.4178 0.4562 0.4260 0.4624 0.4274 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 7C2 7D2 8A2 8B2 8C2 8D2 Region x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4141 0.4513 0.3939 0.4359 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.3981 0.4475 0.4071 0.4523 0.4582 0.4099 0.4532 0.4008 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 7C3 7D3 8A3 8B3 8C3 8D3 Region x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4085 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 7C4 7D4 8A4 8B4 8C4 8D4 Performance Groups - Forward Voltage XLamp XP-E HEW LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward Voltage Group Minimum Forward Voltage (V) @ 350 mA Maximum Forward Voltage (V) @ 350 mA B 1.75 2.0 C 2.0 2.25 D 2.25 2.5 E 2.5 2.75 F 2.75 3.0 G 3.0 3.25 H 3.25 3.5 J 3.5 3.75 Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® XP-E High‑Efficiency White LED Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 0T 0.33 0C 2U ANSI C78.377A 2R 1U 0D 1R 0A 0.30 3R 2A 1D 1A 0B 0.31 2D 1C 1B 0S 0.32 3A 2B 1S 0.34 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5000 K 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A3 8A2 8A4 4D 8D1 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 5D2 5A3 5A2 4B 6D2 6A3 6A2 5D3 7A2 6D3 6B1 5C1 5B2 6C1 6B4 5C2 8B1 7C4 7C1 7B4 7B1 6C4 7C2 7B3 7B2 0.41 8B3 8B2 7C3 5A1 3B 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® XP-E High‑Efficiency White LED Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 8000 K 0.31 1R 0C 0B 0A 0U 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.28 0.29 0.28 0.36 0.29 0.30 1R 0R 0R 0.29 1U 0U 0.30 0.29 0.28 ANSI C78.377A 2R 1A 0D CCx 0.36 0A 0.30 0S 0.32 2U 1D 0.35 0D 1U 3R 2A 1B 0.34 0.31 ANSI C78.377A 2R 1A 2D 1C 0.33 0C 0B 0T 0.33 2U 1D 3A 2B 1S 0.32 0S 0.32 3R 2A 1B 0.34 0.31 0T 0.33 3B 2C 1T 8000 K 3A 2D 1C 3S 2T 2S 0.35 2B 1S 0.36 3B CCy 0.34 53 6500 K 2C 1T 5700 K 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K 6500 K 0.36 2T 3B 2S 0.35 2C 1T 8000 K 0.34 CCy 3S 50 0.37 0T 0.33 0S 0.32 0C 0.31 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 2D 1C 1B 0B 3A 2B 1S 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® XP-E High‑Efficiency White LED Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 E4 6D2 6A3 6A2 7A4 7A1 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 3B 8B2 6D1 5D2 5A2 6D4 8D1 8A4 8A1 7D4 7D1 8A3 8A2 7D3 7D2 7A3 7A2 6D3 8B1 7C4 7C1 7B4 7B1 6C1 6B1 5C4 5D3 5A3 4B 3C 5A1 4D 0.36 5B1 6C2 6C4 6B4 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C3 6B3 7C2 7B3 7B2 7C3 E8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 0.39 F4 0.38 0.37 5C4 5D2 7A2 6D3 6D2 6A3 6A2 5D3 5A3 6C1 6D4 7A1 7A4 7C1 7B4 7B1 6C4 6B4 6B1 5C1 5B1 5A2 4B 7A3 7D1 7D2 7D4 7D3 8A1 8A2 8A4 8A3 8D1 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B3 5B4 3C 0.36 5C3 5B2 4C 6C2 8B1 7C4 8B3 8B2 7C3 7C2 7B3 7B2 6B2 5C2 F7 6C3 6B3 F5 5000 K F6 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® XP-E High‑Efficiency White LED Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3250 K F7 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 Bin and Order Code Formats XP-E HEW bin codes and order codes are configured in the following manner: Order Code Bin Code Series XPE = XP-E Series XPE = XP-E Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Kit Number Luminous or radiant flux group SSSCCC-BD-HHHH-NNNNN Internal code Color HEW = High-Efficiency White Internal code SSSCCC-BD-WWW-FF-G-AA Voltage performance group Chromaticity bin or dominant-wavelength group Color HEW = High-Efficiency White Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® XP-E High‑Efficiency White LED Reflow Soldering Characteristics In testing, Cree has found XLamp XP-E HEW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 °C 45-90 seconds 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® XP-E High‑Efficiency White LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Cree currently recommends a maximum drive current of 700 mA for XLamp XP-E High‑Efficiency White LEDs in designs seeking the ENERGY STAR® 35,000-hour lifetime rating* (≥ 94.1% luminous flux @ 6000 hours) or 1000-mA driver current in designs seeking the ENERGY STAR* 25,000-hour lifetime rating (≥ 91.8% luminous flux @ 6000 hours). Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. * These lifetime ratings are based on the current ENERGY STAR Product Specification for Luminaires (Light Fixtures) V1.0 (February 16, 2011) and ENERGY STAR Program Requirements for Integral LED Lamps V1.4 (May 13, 2011) lumen maintenance criteria. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-E HEW LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® XP-E High‑Efficiency White LED Notes - cONTINUED REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® XP-E High‑Efficiency White LED 6 6 5 5 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT INFORMATION CREE CONFIDENTIAL. THIS PLOT ANDAND THETHE INFORMATION CONTAINED WITHIN PROPRIETARY CONTAINED WITHIN AREARE THETHE PROPRIETARY ANDAND CONFIDENTIAL INFORMATION OF CREE, THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC.INC. THIS PLOT MAY BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOTNOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON WRITTEN CONSENT OF CREE Mechanical Dimensions (T THE =WITHOUT 25 °C) OF CREE INC.INC. 4 4 3 3 REV R A Thermal vias, if present, are not shown on these drawings. 3.30 3.30 All measurements are ±.13 mm unless otherwise indicated. D D .50 .50 2.30 2.30 2.08 2.08 3.45 3.45 .83 .83 6 6 5 5 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THETHE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND INFORMATION CONTAINED WITHIN AREARE THETHE PROPRIETARY AND CONTAINED WITHIN PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC.INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, THIS PLOT MAY NOTNOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT 3.45 3.45 PERSON OF CREE INC.INC. OF CREE 44 N ON 33 2.08 2.08 2.5 2.5 3.45 3.45 3.30 3.30 .50 .50 2.30 2.30 1.30 1.30 .50 .50 PRIMARY PRIMARY 3.30 3.30 REF. REF. DD .50.50 3.30 3. .50 .50 .64 .64 .50 .50 C B B 3.30 3.30 2.52.5 3.30 3.30 REF. REF. 1.30 1.30 C C .25 .25 PRIMARY PRIMARY 1.30 1.30 Bottom View PRIMARY PRIMARY .50 .50 3.30 3.30 A B 1.30 1.30 .50 .50 Alternate Bottom View 1.01 1.01 .50 .50 RECOMMENDED SOLDER RECOMMENDED PCB PCB SOLDER PAD PAD .64.64 3.30 3.30 .50.50 .65 .65 .75 .75 .65.65 A 2.5 2.5 3.30 3.30 3.30 3.30 B .65 .65 .83 .83 .50 .50 C BYBY DATE APP'D DATE APP'D Side View 3.30 3.30 .50.50 2.30 2.30 .83.83 11 REVISONS REVISONS DESCRIPTION DESCRIPTION Top View 2.08 2.08 3 3.30 REV REV 3.45 3.45 3 4 REV REV 22 DCD C T ANY ANY 4 .50 .50 6 3.30 3.30 6 5 5 ALTERNATIVE ALTERNATIVE 2.30 2.30 3.30 3.30 ALL DIMENSIONS ALL DIMENSIONS ARE .64 .64 UNLESS OTHERW UNLESS OTHERWISE DIMENSIONS DIMENSIONS ARE MILLIMETERS MILLIMETERS AND AN AF RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN TOLERANCE UNL TOLERANCE UNLESS .XX ± (HATCHED IS OPENING) .XX ± .25 .2 (HATCHED AREAAREA IS OPENING) ± .1 .XXX±.XXX .125 ± .5° X° ±X° .5° THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION FOR SHEET MET FOR SHEET METAL P ± 1. .X ± .X 1.5 ± .7 .XX ±.XX.75 .25 .25 ± .2 .XXX±.XXX .25 ± .5° X° ±X° .5° 1.6 1.6FINIS SURFACE BB SURFACE FINISH: 4 4 3 3 .75 .75 .25.25 3.30 3.30 3.30 3.30 1.30 1.30 1.01 1.01 2.30 2.30 3.30 3.30 ALL DIMENSIONS ARE A ALL DIMENSIONS D UNLESS OTHERWISE SP UNLESS OTHERWIS DIMENSIONS ARE AR IN DIMENSIONS C MILLIMETERS ANDAND AFTE MILLIMETERS Recommended Stencil Pattern PCB Solder Pad RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN TOLERANCE UNLESS SP TOLERANCE UNLES .XX ± .25 (HATCHED AREA IS OPENING) .XX ± .25 A (HATCHED AREA IS Open) OPENING) (Hatched Area is RECOMMENDED PCB PCB SOLDER PAD PAD RECOMMENDED SOLDER .XXX±.XXX .125 ± .125 X° ±X° .5° ± .5° THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION M 1.01 FOR FOR SHEET METAL PAR SHEET METAL 1.01 ALL DIMENSIONS ARE ± ±.13MM UNLESS OTHERWISE .X of ±.X 1.5 ± 1.5 ®OTHERWISE ®NOTED ALL DIMENSIONS ARE .13MM UNLESS NOTED Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark 2.30 .XX ± .75 2.30 .XX ± .75 ® Cree, Inc. ENERGY STAR Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. .XXX±.XXX .25 ± .25 F 3.30 DATE DRAWN BY 3.30is a registered trademark of the U.S. EnvironmentalUNLESS DATE DRAWN BY X° ±X° .5° ± .5° OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED 4600 Silicon Drive D. CRONIN 11/29/10 4600 Silicon Drive 1.6FINISH: DIMENSIONS ARE ININD. CRONIN11/29/10 1.6 SURFACE FINISH: Durham, N.C 27703 DIMENSIONS ARE SURFACE Durham, N.C 27703 CHECK DATE 20 MILLIMETERS AND AFTER FINISH. CHECK DATE MILLIMETERS AND AFTER FINISH. Phone (919) 313-5300 RECOMMENDED STENCIL PATTERN Phone (919) 313-5300 6 6 5 UNLESS 4 4 3 3 5UNLESS RECOMMENDED STENCIL PATTERN TOLERANCE SPECIFIED: -- --- -Fax (919) 313-5558 TOLERANCE SPECIFIED: Fax (919) 313-5558 .XX ± ± .25.25 APPROVED (HATCHED AREA IS IS OPENING) DATE AA .XX (HATCHED AREA OPENING) DATETITLE APPROVED .XXX ± ±.125 TITLE .XXX .125 A A .75.75 Recommended E 1 5 DETAIL B SCALE 2 : 1 REF 4.375 F(III) Bo XLamp XP-E High‑Efficiency White LED ® REF 4.375 Bo Tape and Reel Y D1 1.5 MIN. SECTION Y-Y REF R0.2 TYPICAL Y All Cree carrier tapesKo conform to EIA-481D, Automated Component Handling Systems Standard. P1 Ao D1 Except as noted, all dimensions in mm. 1.5 MIN. SECTION Y-Y REF 0.59 R 4 2.2 Do 1.5 5 P2 2.0 ±0.05 (I) ±0. 0 Po 4.0 ±0.1 (II) CATHODE SIDE Y 5 E1 1.75 ±0.1 T 0.30 ±0.05 F(III) SECTION X-X REF Ao 3.70 Y (I) +/- 0.1 +/- 0.1 +0.0/-0.1 +/- 0.05 Cathode Side ANODE SIDE P1 REF 0.59 Bo Ko F P1 W 3.70 2.40 5.50 8.00 12.00 (II) (IV) +/- 0.1 +0.3/-0.1 Measured from centerline of sprocket hole Cumulative tolerance of 10 sprocket holes is ± 0.20. Measured from centerline of sprocket hole to centerline of pocket. Other material available. Anode Side (denoted by + and circle) (I) END3.70 +/- 0.1 +0.0/-0.1 +/- 0.05 +/- 0.1 +0.3/-0.1 SECTION X-X Ao +/- 0.1 3.70 2.40 5.50 8.00 12.00 2.5±.1 to centerline of pocket. (III) Ao 4 2.2 3.70 D1 2.40 1.5 MIN. 5.50 +.3 12.0 8.00 P 1 .0 W 12.00 Bo Ko F X 8.0±.1 X 1.75±.10 3.70 Bo Ko F P1 W W 1.5±.1 4.0±.1 R SECTION Y-Y Bo REF R0.2 TYPICAL Ko 4.375 Ao +/- 0.1 (II) +/- 0.1 +0.0/-0.1 +/- 0.05 (III) (IV) User Feed Direction Measured from centerline of sprocket hole to centerline of pocket. Cumulative tolerance of 10 sprocket holes is ± 0.20. Measured from centerline of sprocket hole to centerline of pocket. Other material available. START +/- 0.1 +0.3/-0.1 Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 21 RE R0.2 TYPICAL Ko X X XLamp ® XP-E High‑Efficiency White LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 22