LP2500K0603BT LOW PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount low pass filter with a small size of 1.6 X 0.8 X 0.6 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N LP2500K0603BT Specification Symbol Dimension (mm) L 1.60 ± 0.15 Frequency range 2400-2500 MHz Insertion Loss (max) 0.6 dB VSWR 2.0 max W 0.80 ± 0.15 Impedance 50 Ω T 0.60 ± 0.10 27dB @ 4800-5000 MHz A 0.175 ± 0.150 30dB @ 7200-7500 MHz B 0.25 ± 0.15 C 0.25 ± 0.15 D 0.50 ± 0.15 E 0.20 ± 0.15 Attenuation (min.) Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION PIN Connection PIN Connection P1 I/O P4 NC P2 GND P5 GND P3 I/O P6 NC PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 LP2500K0603BT LOW PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989