DTEA1063 SERIES 54~65 Watts AC/DC Desktop Power Supply Single Outputs Rev A Size: 3.74in x 1.65in x 1.14in (95mm x 42mm x 29mm) OPTIONS FEATURES • Inlet Connectors • Output Voltage • • • • • Single Outputs Economy Type Efficiency Level VI compliant RoHS Compliant MTBF: >30,000 Hours • • • • • 100~240VAC Input Voltage Range Optional Output Connectors Available Short Circuit, Over Current, and Over Voltage Protection IEC-320-C6 and IEC-320-C8 Inlet Connectors Available UL/cUL 60950 and TUV/GS EN/IEC 60950 Safety Approvals DESCRIPTION The DTEA1063 series of AC/DC desktop power supplies provides up to 65 Watts of continuous output power. This series consists of single output models with output voltages ranging from 8VDC to 24VDC and an input voltage range of 100~240VAC. This series is CEC and RoHS compliant and has over voltage, over current, and short circuit protection. This series also has two AC inlet connector types available: IEC-320-C6 and IEC-320-C8. Optional output connectors are also available, please call factory for order details. MODEL SELECTION TABLE Input Voltage Range (1) Model Number DTEA10632A DTEA10632B DTEA10633A DTEA10633B 100~240VAC (2) Output Voltage 8~14VDC 15~24VDC 8~14VDC 15~24VDC Output Current Min Load Max Load 0A 4.5A 0A 4.06A 0A 4.5A 0A 4.06A Ripple & Noise(3) Output Power 350mVp-p 54W 65W 54W 65W Efficiency AC Inlet 84% 85% 84% 85% IEC-320-C8 IEC-320-C8 IEC-320-C6 IEC-320-C6 SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation(4) Load Regulation Output Power Output Current Ripple & Noise (20MHz bandwidth) Hold-Up Time Start-Up Time 11/17/2015 Min 100 50 At Cold Start -2 -5 Typ ≤2.0 ≤140 Max Unit 240 60 VAC Hz A A See Table +2 +5 See Table See Table 350 ≥8.3 ≤3 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] % % mVp-p ms s Page 1 of 3 DTEA1063 SERIES 54~65 Watts AC/DC Desktop Power Supply Single Outputs Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS PROTECTION Short Circuit Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity MTBF GENERAL SPECIFICATIONS Typ Max Unit Auto-Recovery Auto-Recovery 0 -20 5 30,000 A Type B Type Efficiency Min 40 85 95 ºC ºC % Hrs 84 85 PHYSICAL SPECIFICATIONS Weight % 7.76oz (220g) 3.74 x 1.65 x 1.14 inches (95 x 42 x 29 mm) IEC-320-C8 or IEC-320-C6 Inlet Dimensions (L x W x H) AC Inlet Connector SAFETY & EMC CHARACTERISTICS UL/cUL UL60950 TUV/GS EN/IEC 60950 FCC CB CE PSE Safety Approvals NOTES (1) (2) (3) (4) (5) The number in red represents the type of AC inlet: “2” is for IEC-320-C8 type and “3” is for IEC-320-C6 type. The output voltage is specified as a range (Ex: 15~24VDC); the customer must specify what they want the voltage set at. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Optional output connectors are available. Please call factory for ordering details. MECHANICAL DRAWINGS Unit: mm 11/17/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A DTEA1063 SERIES 54~65 Watts AC/DC Desktop Power Supply Single Outputs COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/17/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3