DTEA1095 SERIES 80~100 Watts AC/DC Desktop Power Supplies Single Output Rev A C18 C14 C8 C6 Size (C18 & C14): 5.39 x 2.32 x 1.34 in OPTIONS • AC Inlet Type: IEC320 C14, C8, C6, C18 • Output Voltage • Over-Temperature Protection Size (C8 & C6): 5.24 x 2.32 x 1.32in FEATURES • • • • Active PFC Function Efficiency Level V, VI Compliant RoHS Compliance 100-240VAC Input Range • • • • IEC320 C14, C8, C6, and C18 AC Inlets Short Circuit, Over Voltage, and Over Current Protection LED Indication MTBF: >30,000 Hours DESCRIPTION The DTEA1095 series of AC DC desktop power supplies provides up to 100 watts of output power. Single output models are available with an input range of 100 to 240VAC. Four different types of AC Inlets are available: IEC320 C14, C8, C6, or C18, as well as output voltages ranging from 18V~56V. This series is protected against over voltage, over current, and short circuit conditions and is RoHS and Efficiency Level V, and VI compliant. Each model has UL/CUL UL60950, TUV/GS EN/IEC 60950, CB, DoIR+C-Tick, CE, PSE, EK, PSB and FCC safety approvals. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) Output Current Ripple & Noise(2) Min Load Max Load 0A 4.75A 350mV Input Voltage Range Output Voltage 100~240VAC 18V~24V DTEA1095Ax 100~240VAC 12V~18V 0A 6.6A 250mV 84W Level V DTEA1095Bx 100~240VAC 15V~24V 0A 5.0A 350mV 90W Level V DTEA1095Cx 100~240VAC 12V~18V 0A 7.50A 250mV 90W Level VI DTEA1095Dx 100~240VAC 32V~42V 0A 2.50A 500mV 80W Level VI DTEA1095Ex 100~240VAC 44V~56V 0A 1.82A 720mV 80W Level VI DTEA1095Fx 100~240VAC 32V~42V 0A 2.81A 500mV 90W Level VI DTEA1095Gx 100~240VAC 44V~56V 0A 2.05A 720mV 90W Level VI DTEA1095Hx 100~240VAC 32V~42V 0A 3.12A 500mV 100W Level VI DTEA1095Jx 100~240VAC 44V~56V 0A 2.27A 720mV 100W Level VI DTEA1095x 2/9/2016 Output Power Efficiency 90W Level V Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 DTEA1095 SERIES 80~100 Watts AC/DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation(3) Load Regulation Output Power Output Current Minimum Load Ripple & Noise (20MHz bandwidth) Min Typ 100 50 Max Unit 240 60 VAC Hz A A ≤2.5 ≤100 At Cold Start See Table ±1 ±5 See Table See Table % % 0 A See Table Turn-On Time Hold-Up Time PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection Over Temperature Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature ≤3 S ≥8.3 mS Auto-Recovery Auto-Recovery Auto-Recovery or Latch Off Optional Storage Temperature Storage Humidity MTBF GENERAL SPECIFICATIONS Efficiency PHYSICAL SPECIFICATIONS Weight 0 40 ºC -20 85 ºC 5 95 % 30,000 Hours Level V, VI 14.82oz (420g) 5.39in x 2.32in x 1.34in (137mm x 59mm x 34mm) 5.24in x 2.32in x 1.32in (133in x 59mm x 33.5mm) AC Inlet C14, C18 Dimensions (L x W x H) AC Inlet C8, C6 SAFETY UL/CUL UL60950 TUV/GS EN IEC 60950 CB DoIR+C-Tick CE PSE EK PSB FCC Safety Approvals NOTES (1) (2) (3) 2/9/2016 The number in the model name (1, 2, 3, 6) indicates the AC Inlet Type. 1=C14, 2=C8, 3=C6, 6=C18. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line. Line Regulation is defined by changing ±10% of input voltage from nominal line at rated load. Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A DTEA1095 SERIES 80~100 Watts AC/DC Desktop Power Supplies Single Output MECHANICAL DRAWINGS COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/9/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3