DTGPSU15 SERIES Up to 15 Watts AC DC Desktop Power Supplies Single Output Rev A A Type: IEC-320-C14 B Type: IEC-320-C8 C Type: IEC-320-C6 D Type: US Cord E Type: EU Cord Size: 3.54~3.94in x 2.3in x 1.29in (90~100mm x 58.5mm x 32.8mm) OPTIONS • • • • FEATURES AC Inlet Output Connector Output Voltage Main Cord Input -US Type -EU Type • Universal Input Voltage Range of 100~240VAC • Compact Package • High Efficiency up to 84.50% • Single Outputs • All Models are Level VI Compliant • • • • • Optional Output Connectors Available US or EU Main Cord Input Available IEC-320-C14, IEC-320-C8, or IEC-320-C6 Inlets Available Short Circuit, Over Voltage, and Over Current Protection UL60950-1; CSA C22.2, EN60905-1, and IEC60950-1 Safety Approvals. DESCRIPTION The DTGPSU15 series of AC DC desktop power supplies offers up to 15 watts of output power in a compact 3.94” x 2.3” x 1.29” package. This series consists of single output models with an input voltage range of 100~240VAC and output voltages ranging from 3~48VDC. Many options are available for this series: AC Inlet of IEC-320-C14, IEC-320-C8, or IEC-320-C6, output connectors, or either a US main cord input or EU main cord input. Each model is Energy Level VI compliant and has UL60950-1; CSA C22.2, EN60950-1 and IEC60950-1 safety approvals. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) DTGPSU15x-1 DTGPSU15x-1-1 DTGPSU15x-2 DTGPSU15x-3 DTGPSU15x-4 DTGPSU15x-5 DTGPSU15x-6 DTGPUS15x-7 DTGPSU15x-8 2/10/2016 Output Current Input Voltage Output Voltage Measured at Range Range Output Min Load Max Load 5~6VDC 5VDC 2.00A 2.40A 6~8VDC 7.5VDC 1.50A 2.00A 8~11VDC 9VDC 1.36A 1.80A 11~13VDC 12VDC 1.15A 1.36A 100~240VAC 13~16VDC 15VDC 0.94A 1.15A 16~21VDC 18VDC 0.72A 0.94A 21~27VDC 24VDC 0.55A 0.72A 27~33VDC 28VDC 0.45A 0.55A 33~48VDC 48VDC 0.31A 0.45A Ripple & Noise 50mV 80mV 80mV 80mV 100mV 120mV 150mV 240mV 240mV No Load Power Consumption <0.075W Output Power 12W 12W 15W 15W 15W 15W 15W 15W 15W Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Avg. Efficiency(2) DoE (VI) CoC (5) 79.94% 80.3% 82.96% 83.26% 84.13% 84.50% 84.13% 84.50% 84.13% 84.50% 84.13% 84.50% 84.13% 84.50% 84.13% 84.50% 84.13% 84.50% Page 1 of 4 DTGPSU15 SERIES Up to 15 Watts AC DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Leakage Current Inrush Current Min Typ 100 50 @240VAC/50Hz @115VAC at 25ºC Cold Start @230VAC at 25ºC Cold Start Line Regulation Load Regulation Variations from minimum to maximum output current Output Power Output Current Ripple & Noise Transient Response Set Up Time Hold Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection Unit 240 60 0.5 0.25 VAC Hz A mA 40 60 OUTPUT SPECIFICATIONS Output Voltage For any input voltage change between input voltage range Max See Table ±1 ±0.5 ±6 ±5 ±3 ±2 See Table See Table See Table ≥4 3000 16 50 ±0.04 3.3V Models All Other Models 3.3V Models 5V, 7.5V, and 9V Models 12V, 15V, and 18V Models 24V, 28V, 48V Models Recovering to 1% of final value within 500µS after a 25% step load change @Full Load @Full Load @Full Load All Output Hiccup Mode Hiccup Mode Rated Output Current Over Voltage Protection Protected by Zener Diode ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Non-Condensing Derating Derated from 100% at 40ºC linearly to 70% at 50ºC MTBF @Full Load at 25ºC ambient GENERAL SPECIFICATIONS Efficiency Insulation Resistance From Input to Output Withstand Voltage From Input to Output PHYSICAL SPECIFICATIONS Weight A, B, and C Types D and E Types % % % mS mS mS %/ºC Automatic Recovery Automatic Recovery >110% Over Current Protection Dimensions (L x W x H) A 0 -40 5 40 85 95 100,000 ºC ºC % hours See Table 50 MΩ VDC 4242 3.53~8.82oz (100~250g) 3.94in x 2.3in x 1.29in (100mm x 58.5mm x 32.8mm) 3.54 x 2.3in x 1.29in (90mm x 58.5mm x 32.8mm) SAFETY & EMC CHARACTERISTICS Safety Approvals EMC UL60950-1; CSA C22.2 EN60950-1 IEC60950-1 CE: Emission: EN55022; EN61000-3-2,3/Immunity: IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) 2/10/2016 “x” In model number indicates AC Inlet Type. “x” can either be “A” for IEC-320-C14 inlet, “B” for IEC-320-C8, or “C” for IEC-320-C6, “D” for USA plug type, or “E” for EU plug type. Avg. Efficiency: Averages the efficiency at 25, 50, 75, and 100% of max. rated output current. Standard Output Cables: 5~13V: UL1185, 18AWG, 4FT 13~48V: UL1185, 20AWG, 6FT Other output cables available. Please call factory for details. Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A DTGPSU15 SERIES Up to 15 Watts AC DC Desktop Power Supplies Single Output DERATING CURVES Temperature Derating Typical Static Characteristics MECHANICAL DRAWINGS IEC-320-C14 2/10/2016 IEC-320-C8 IEC-320-C6 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTGPSU15 SERIES Up to 15 Watts AC DC Desktop Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/10/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4