DTEA1300 SERIES 230~310 Watts AC/DC Desktop Power Supplies Single Output Rev A FEATURES • • • • • Active PFC Function Level V, VI Compliance RoHS Compliance AC Inlet IEC320-C14 Output Voltages Ranging from 12V to 56V • Over Voltage, Over Current, and Over Temperature Protection • LED Indication • MTBF >30,000 hours • Input Voltage 100-240VAC • Optional Output Connectors Available DESCRIPTION The DTEA1300 series of AC DC desktop power supplies offers up to 310 watts of output power in a 7.76” x 3.94” x 2.01” package. This series consists of single model outputs with an output voltage range from 12V~56V. Each model has Efficiency Level V, VI as well as RoHS compliance. Each model also has AC Inlet IEC320-C14 and active PFC function. The DTEA1300 series is protected against over voltage, over current, and over temperature conditions and has UL60950 and EN/IEC 60950 safety approvals. Size: 7.76in x 3.94in x 2.01in (197mm x 100mm x 51mm) MODEL SELECTION TABLE Model Number Input Voltage Range DTEA13001A Output Voltage 12~16V Output Current Min Load 0A Max Load 19.16A Ripple & Noise(1) Output Power 240mV 230W DTEA13001B 12~16V 0A 20.0A 240mV 240W DTEA13001C 12~16V 0A 20.83A 240mV 250W DTEA13001D 19~24V 0A 13.68A 360mV 260W DTEA13001E 19~24V 0A 14.21A 360mV 270W DTEA13001F 32~42V 0A 8.43A 630mV 270W DTEA13001G 44~56V 0A 6.13A 840mV 270W DTEA13001H 19~24V 0A 14.73A 360mV 280W DTEA13001M DTEA13001N DTEA13001P 19~24V 19~24V 32~42V 0A 0A 0A 15.26A 15.78A 9.68A 360mV 360mV 630mV 290W 300W 310W DTEA13001Q 44~56V 0A 7.04A 840mV 310W 11/24/2015 100-240VAC Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency Level V, VI Page 1 of 3 DTEA1300 SERIES 230~310 Watts AC/DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min INPUT SPECIFICATIONS Input Voltage Range Typ Max Unit 100 240 VAC Input Frequency Input Current Inrush Current At Cold Start OUTPUT SPECIFICATIONS Output Voltage Line Regulation(2) Load Regulation Output Power Output Current Ripple & Noise (20MHz bandwidth) Hold-Up Time Turn-On Time PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection Over Temperature Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature 50 60 Hz A A 0 40 ºC Storage Temperature -20 85 ºC 5 95 ≤4 ≤150 See Table ±1 ±5 See Table See Table See Table ≥8.3 ≤3 % % mS S Auto-Recovery Auto-Recovery Latch Off Latch Off Storage Humidity MTBF GENERAL SPECIFICATIONS Efficiency PHYSICAL SPECIFICATIONS Weight % 30,000 Hours Meets CEC Level V, VI 3.75lbs (1.7Kg) 7.76in x 3.94in x 2.01in (197mm x 100mm x 51mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS UL60950 EN/IEC 60950 Safety Approvals NOTES (1) (2) Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 11/24/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A DTEA1300 SERIES 230~310 Watts AC/DC Desktop Power Supplies Single Output MECHANICAL DRAWINGS Mechanical Drawing COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/24/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3