DTA-080A4 SERIES 80 Watts AC/DC Switching Adapter Single Output Rev A FEATURES • Meets Efficiency Level VI (Models • Short Circuit, Over Load, and Over Over 9V) Voltage Protection • 3-Pole IEC320-C14 AC inlet, Class I • Meets UL 60950-1, CSA C22.2• Output Voltage Range from 9V to 48V No.60950-1, TUV EN60950-1, CB • No Load Power Consumption IEC60950-1 Safety standards <150mW • Meets FCC Class B, CISPR22 Class B, • Power ON LED indicator EN 55022 Class B, and CE EMC • Input Voltage Range 90-264VAC standards DESCRIPTION The DTA-080A4 series of AC/DC desktop power supplies provides 80 Watts of continuous output power. This series consists of single output models ranging from 9V to 48V with an input voltage range of 90-264VAC. Models over 9V are Efficiency Level VI compliant and all models are RoHS compliant. The series includes and IEC320-C14 AC inlet and an LED power On indicator. All models have short circuit, over load, and over voltage protection along with UL 60950-1, CSA C22.2No.60950-1, TUV EN60950-1, CB IEC60950-1 safety approvals. Size: 5.2in x 2.72in x 1.57in (132mm x 69mm x 40mm) MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current DTA-072A4-1Y090A DTA-080A4-1Y120A DTA-080A4-1Y150A DTA-080A4-1Y180A DTA-080A4-1Y240A DTA-080A4-1Y280A DTA-080A4-1Y480A 90-264VAC 9V 12V 15V 18V 24V 28V 48V Ripple & Noise(1) Regulation Output Power Efficiency 240mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p ±5% ±5% ±5% ±5% ±5% ±5% ±5% 72W 80W 80W 80W 80W 80W 80W V VI VI VI VI VI VI 8A 6.67A 5.34A 4.45A 3.34A 2.86A 1.67A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range @115VAC @230VAC at Full Load Peak @115VAC Cold Start @25°C Peak @230VAC Cold Start @25°C @90VAC @264VAC max. Power Factor Inrush Current Input Current (rms) OUTPUT SPECIFICATIONS Output Voltage Output Power Ripple & Noise (Vp-p)(1) Hold-Up Time Typ 90 0.95 0.90 Max Unit 264 VAC 75 150 A 2 1 9 @Full Load, 115VAC PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature (2) Storage Temperature Humidity MTBF @Full Load and 25°C ambient temperature 2/4/2016 Min A 48 80 240 V W mV >20 Ms Auto-Recovery Auto-Recovery Shutdown and latch off, AC recycle 0 -10 10 120,000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 60 85 90 °C °C % hrs Page 1 of 4 DTA-080A4 SERIES 80 Watts AC/DC Switching Adapter Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS GENERAL SPECIFICATIONS Efficiency PHYSICAL SPECIFICATIONS Weight @Average Load, 115/230VAC Min Typ Max Unit 89 % 15.52oz (440g) 5.2in x 2.72in x 1.57in (132mm x 69mm x 40mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS UL 60950-1 CSA C22.2- No.60950-1 TUV EN60950-1 CB IEC60950-1 FCC CISPR22 EN55022 CE Safety Standards EMC Standards Class B Class B Class B NOTES (1) (2) Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel at output connector. Derate linearly 2.5% per °C from 41 to 60°C MECHANICAL DRAWINGS 2/4/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A Note: 1. 2. 3. 4. DTA-080A4 SERIES 80 Watts AC/DC Switching Adapter Single Output AC Inlet: IEC320-C14 Plastic Case Color: Black Tolerance: ±0.5mm Unit: mm Standard Output Cable 1. 2. 3. AWM1571 #14 AWG/1C + SHIELDING, UL 80°C 30V VW-1, 1050mm AWM1185 #16 AWG/1C + SHIELDING, UL 80°C 300V VW-1, 1050mm Depends on customer requirements. COMPANY INFORMATION 2/4/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTA-080A4 SERIES 80 Watts AC/DC Switching Adapter Single Output Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/4/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4