WMIEA1019 SERIES 15~20 Watts AC/DC Interchangeable Wall Mount Power Supplies Single Output Rev C Size: 2.25in x 1.33in x 1.53in (57.2mm x 33.82mm x 38.86mm) OPTIONS • Interchangeable Plug Type (USA, China, EU, UK, SAA, South Africa) • Output Cable FEATURES • Wide Input Voltage Range of 100VAC to 240VDC • Output Voltage Range of 5V to 48V • Maximum Power of 20 Watts • RoHS Compliant • Meets CEC Level V, VI Efficiency • Five Interchangeable Plug Types Available: USA/China, EU, UK, SAA, and South Africa • Short Circuit, Over Voltage, Over Current, and Over Temperature Protection • Single Output • Meets IEC60950 Safety Approval DESCRIPTION The WMIEA1019 series of interchangeable wall mount power supplies offers up to 20 watts of output power in a compact 2.25” x 1.33” x 1.53” package. This series consists of single output models with output voltages ranging from 5V to 48V and wide input voltage range of 100VAC to 240VDC. Each model in this series is RoHS compliant and meets CEC Level V, VI efficiency. Each model is also protected against short circuit, over voltage, over current, and over temperature conditions and meets IEC60950 safety approval. Five interchangeable plug types are available for the WMIEA1019 series: USA/China plug, EU plug, UK plug, SAA plug, and South Africa plug. Optional output cables are also available. Please call factory for order details. MODEL SELECTION TABLE Model Number(1) WMIEA1019Ax WMIEA1019Bx WMIEA1019Cx WMIEA1019Dx WMIEA1019Ex WMIEA1019Fx 5/31/2016 Input Voltage Range Output Voltage Options(2) 100VAC~240VDC 5-8V 9-13V 14-19V 20-27V 28-35V 36-48V Output Current Min Load Max Load 0A 3A 0A 2A 0A 1.42A 0A 1A 0A 0.71A 0A 0.55A Ripple & Noise(3) Output Power Efficiency Level 100mV 150mV 200mV 250mV 280mV 360mV 15W 18W 20W 20W 20W 20W Level V, VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev C WMIEA1019 SERIES 15~20 Watts AC/DC Interchangeable Wall Mount Power Supplies Single Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min INPUT SPECIFICATIONS Input Voltage Range Input Current Inrush Current @230VAC, Cold Start, Maximum Load OUTPUT SPECIFICATIONS Output Voltage Line Regulation(4) Load Regulation Output Power Output Current Minimum Load No Load Power Ripple & Noise (20MHz bandwidth)(3) Turn On Time PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection Over Temperature Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight Max Unit 100VAC-240VDC ≤0.8 ≤60 A A See Table +1 +5 See Table See Table -1 -5 0 % % A W ≤0.1 See Table ≤3 S Auto Recovery Auto Recovery Auto Recovery Latch Mode 0 -20 5 30,000 40 85 90 ºC ºC % Hours 5.29oz (150g) 2.25in x 1.33in x 1.53in (57.2mm x 33.82in x 38.86in) Dimensions (L x W x H) SAFETY Safety Approvals Typ IEC60950 NOTES (1) (2) (3) (4) (5) “x” in model number represents the AC Plug Type. “x” can either be “UC” for USA/China plug, “E” for EU plug, “K” for UK plug, “A” for SAA plug, “S” for South Africa plug, or “5” for all plugs. Specify necessary output voltage. Ex: 12V Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1µF ceramic capacitor & parallel with 47µF aluminum capacitor at full load and nominal line. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Certificates listed are for reference only. Please contact factory for details. MECHANICAL DRAWINGS 5/31/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev C WMIEA1019 SERIES 15~20 Watts AC/DC Interchangeable Wall Mount Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/31/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3