WMGPSU25 SERIES 25 Watts AC/DC Wall Mount Power Supply Single Output Rev A U Type E Type SA Type BS Type Size: 2.97in x 1.26in x 1.87in Size: 2.97in x 1.26in x 1.87in Size: 2.97in x 1.57in x 1.87in Size: 2.97in x 1.92in x 1.87in OPTIONS FEATURES • Output Connector • Output Voltage • Plug Type • • • • • • Universal Input Voltage of 100~240VAC Meets EISA 2007/DoE (VI) & EU ErP/CoC (5) Single Output Optional Output Connectors Available Output Voltages Ranging from 5~58VDC Maximum Output Power of 25 Watts • Short Circuit, Over Voltage, and Over Current Protection • Low Leakage Current: <0.25mA • American, European, 2-Pin Australian, and UK Plug Types Available • UL60950-1, CSA C22.2, IEC 60950-1, EN60950-1, and J60950-1 Safety Approvals DESCRIPTION The WMGPSU25 series of AC DC wall mount power supplies offers up to 25 watts of continuous output power. This series consists of single output models with a universal input voltage range of 100~240VAC and output voltages ranging from 5~58VDC. Four different plugs are available to choose from: American, European, 2-Pin Australian, and UK types. Optional output connectors are also available. Each model is Efficiency Level VI compliant, and each model has short circuit, over voltage, and over current protection. Each model also has UL60950-1, CSA C22.2, IEC 60950-1, EN60950-1, and J60950-1 safety approvals. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) WMGPSU25x-1 WMGPSU25x1-1 WMGPSU25x-2 WMGPSU25x-3 WMGPSU25x-4 WMGPSU25x-5 WMGPSU25x-6 WMGPSU25x-7 WMGPSU25x-8 12/16/2015 Input Voltage Range Output Voltage Output Current Ripple & Noise No Load Power Consumption Output Power Measured at Output 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 100~240VAC 5~6VDC 6~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC 4~3.33A 3.66~2.75A 3.125~2.27A 2.27~1.92A 1.92~1.56A 1.56~1.19A 1.19~0.926A 0.926~0.757A 0.757~0.43A 100mV 100mV 100mV 120mV 120mV 180mV 180mV 240mV 240mV <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W <0.075W 20W 22W 25W 25W 25W 25W 25W 25W 25W 5 7.5 9 12 15 18 24 30 48 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency(2) DoE (VI) 83.08% 85.86% 86.35% 86.35% 86.35% 86.35% 86.35% 86.35% 86.35% CoC (5) 83% 86.41% 86.97% 86.97% 86.97% 86.97% 86.97% 86.97% 86.97% Page 1 of 4 WMGPSU25 SERIES 25 Watts AC/DC Wall Mount Power Supply Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current 100 47 @115VAC at 25ºC cold start @230VAC at 25ºC cold start @240VAC/50Hz Max Unit 240 63 0.65 VAC Hz A 0.25 mA 65 95 Leakage Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation For any input voltage change between input voltage range Load Regulation Variations from minimum to maximum output current. Output Power Output Current Ripple & Noise (20MHz bandwidth) Maximum excursion of 4% or better on all models. Transient Response Recovering to 1% of final value within 500uS after a 25% step load change Setup Time @Full Load Hold up Time @Full Load Rise Time @Full Load Temperature Coefficient All outputs PROTECTION Short Circuit Protection Hiccup Mode Hiccup Mode Over Current Protection Rated Output Current Protected by Zener diode Over Voltage Protection Rated Output Voltage ENVIRONMENTAL SPECIFICATIONS Operating Temperature See derating curve Storage Temperature Relative Humidity Non-condensing Derating Derated from 100% at +40ºC linearly to 70% at 50ºC MTBF @Full Load at 25ºC ambient GENERAL SPECIFICATIONS Efficiency Insulation Resistance From Input to Output Withstand Voltage From Input to Output PHYSICAL SPECIFICATIONS Weight U Type, E Type Dimensions (L x W x H) Typ SA Type BS Type A See Table ±1 ±5 See Table See Table See Table % % 1000 10 50 mS mS mS %/ºC ±0.04 Automatic Recovery Automatic Recovery 110 % 110 140 % 0 -40 5 40 85 95 ºC ºC % 100,000 Hours See Table 50 MΩ VDC 4242 5.29~6oz (150-170g) 2.97in x 1.26in x 1.87in (75.5mm x 32mm x 39mm) 2.97in x 1.57in x 1.87in (75.5mm x 39.8mm x 39mm) 2.97in x 1.92in x 1.87in (75.5mm x 48.8mm x 39mm) SAFETY & EMC CHARACTERISTICS UL60950-1 CSA C22.2 IEC 60950-1 EN60950-1 CE: EN55022/EN55024 FCC Part15 Safety Approvals EMC Class B NOTES (1) (2) (3) (4) “x” in model name indicates plug type. “U”=U Type= US Plug, “E”=E Type= EU plug, “SA”=SA Type= Aus Plug, “BS”=BS Type=UK Plug. Average Efficiency 25, 50, 75, 100% load Optional Output Connectors available. Please call factory for ordering details. Standard Output Cable: 5~13V: 16AWG/UL1571/1M 13~21V: 18AWG/UL2468/6FT 21~58V: 20AWG/UL2468/6FT 12/16/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A WMGPSU25 SERIES 25 Watts AC/DC Wall Mount Power Supply Single Output DERATING CURVES Ambient Temperature Typical Static Characteristics MECHANICAL DRAWINGS U Type- US Plug 12/16/2015 E Type- EU Plug Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A SA Type- Australian Type WMGPSU25 SERIES 25 Watts AC/DC Wall Mount Power Supply Single Output BS Type- UK Type COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/16/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4