DTCGSW60 SERIES 40~60 Watts, AC/DC Desktop Power Supplies Rev C Wall Industries, Inc. FEATURES “A” Type Size: 4.72 x 2.00 x 1.34 inches “B” Type Size: 4.72 x 2.00 x 1.34 inches “C” Type Size: 4.72 x 2.00 x 1.34 inches Class II 100-240VAC Input Voltage Range RoHS Compliant CEC / Energy Star Level V Compliant 40~60 Watts Output Power Output Voltage, Over Current, & Short Circuit Protection Single Outputs IEC-320-C14, IEC-320-C8 & IEC-320-C6 AC Inlets Available Very Low Standby Power Several Output Connector Options Available MTBF: 50,000 Hours UL/cUL, FCC, CE, GS, SAA, C-Tick, CB, & EUP Safety Approvals DESCRIPTION The DTCGSW60 series of class II AC/DC desktop power supplies provides up to 60 Watts of output power in a 4.72” x 2.00” x 1.34” package. This series consists of single output models ranging from 5V to 36VDC with a 100~240VAC input voltage range. These supplies are RoHS compliant and are protected against over voltage, over current, and short circuit conditions. The DTCGSW60 series is CEC and Energy Star Level V compliant and has UL/cUL, FCC, CE, GS, SAA, C-Tick, CB, and EUP safety approvals. IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC inlet types are available for this series. MODEL SELECTION TABLE Model Number DTCGSW4005A DTCGSW5675A DTCGSW5409A DTCGSW6012A DTCGSW5614A DTCGSW6015A DTCGSW5719A DTCGSW6024A DTCGSW5436A DTCGSW4005B DTCGSW5675B DTCGSW5409B DTCGSW6012B DTCGSW5614B DTCGSW6015B DTCGSW5719B DTCGSW6024B DTCGSW5436B DTCGSW4005C DTCGSW5675C DTCGSW5409C DTCGSW6012C DTCGSW5614C DTCGSW6015C DTCGSW5719C DTCGSW6024C DTCGSW5436C Input Voltage Range 100 ~ 240 VAC 100 ~ 240 VAC 100 ~ 240 VAC Output Voltage 5 VDC 7.5 VDC 9 VDC 12 VDC 14 VDC 15 VDC 19 VDC 24 VDC 36 VDC 5 VDC 7.5 VDC 9 VDC 12 VDC 14 VDC 15 VDC 19 VDC 24 VDC 36 VDC 5 VDC 7.5 VDC 9 VDC 12 VDC 14 VDC 15 VDC 19 VDC 24 VDC 36 VDC Output Current 8A 7.5A 6A 5A 4A 4A 3A 2.5A 1.5A 8A 7.5A 6A 5A 4A 4A 3A 2.5A 1.5A 8A 7.5A 6A 5A 4A 4A 3A 2.5A 1.5A Ripple & Noise (1) 50mVp-p 50mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 50mVp-p 50mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 50mVp-p 50mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p Output Power 40W 56.3W 54W 60W 56W 60W 57W 60W 54W 40W 56.3W 54W 60W 56W 60W 57W 60W 54W 40W 56.3W 54W 60W 56W 60W 57W 60W 54W AC Inlet IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. Ripple and noise is measured at 20MHz limited bandwidth with 0.1μF ceramic and 10μF electrolytic capacitors across the output 2. Several output connector options available. Please call factory for ordering details. 03/22/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev C Wall Industries, Inc. DTCGSW60 SERIES 40~60 Watts, AC/DC Desktop Power Supplies SPECIFICATIONS: DTCGSW60 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Input Frequency Input Current TEST CONDITIONS Rated input voltage range Min Typ Max Unit 100 47 115/230 50/60 240 63 1.5 30 75 0.3 VAC Hz A 90VAC/60Hz and full load 100VAC and full load 240VAC and full load 230VAC/50Hz and no load Inrush Current Stand-by Power A W OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Minimum Load Ripple & Noise Hold-Up Time Turn-on Time -1 -5 See Table +1 +5 See Table See Table 0 % % mA See Table 100VAC/60Hz and full load 100VAC/60Hz and full load 10 1 ms s PROTECTION Over Voltage Protection Over Current Protection Short Circuit Protection Output voltage clamped by Zener diode Output shut-down; Automatic recovery Output shut-down; Automatic recovery GENERAL SPECIFICATIONS Efficiency Switching Frequency Dielectric Withstand Voltage Insulation (input to output) Meets CEC-V / ERP 65 10mA / 60 sec 500VDC 1500 10 KHz VAC MΩ ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Cooling MTBF 0 -20 5 @ 25°C (MIL-HDBK-217F) +40 +60 95 Free air convection 50,000 hours °C °C % RH PHYSICAL SPECIFICATIONS Dimensions (L x W x H) Weight “A” Suffix “B” Suffix “C” Suffix AC Inlet Output Connector 4.72 x 2.00 x 1.34 inches (120.0 x 51.0 x 34.0 mm) 9.3oz (263g) IEC-320-C14 IEC-320-C8 IEC-320-C6 Contact factory for options SAFETY & COMPLIANCE Safety Approvals Compliance 03/22/2013 UL/cUL, FCC, CE, GS, SAA, C-Tick, CB, and EUP RoHS and CEC/Energy Star Level V compliant Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Wall Industries, Inc. DTCGSW60 SERIES 40~60 Watts, AC/DC Desktop Power Supplies Rev C MECHANICAL DRAWING Unit: inches (mm) “B” Suffix “C” Suffix 1.34 (34.0) 1.34 (34.0) 1.34 (34.0) IEC-320-C14 IEC-320-C8 IEC-320-C6 2.01 (51.0) 4.72 (120.0) “A” Suffix 2.01 (51.0) NOTES 1. Tolerance: ±0.01 (±0.25) 2. Weight: 9.3oz (263g) 3. Optional output connector available 4. All dimensions are for reference only MODEL NUMBER SETUP DTCGSW 60 24 A Series Name Output Power Ouptut Voltage AC Inlet Connector Type 40: 40 Watts 05: 5 VDC A: IEC-320-C14 54: 54 Watts 75: 7.5 VDC B: IEC-320-C8 56: 56 Watts 56.3 Watts 09: 9 VDC C: IEC-320-C6 12: 12 VDC 57: 57 Watts 14: 14 VDC 60: 60 Watts 15: 15 VDC 19: 19 VDC 24: 24 VDC 36: 36 VDC Note: Several output connector options are available. Please contact factory for ordering details. 03/22/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Wall Industries, Inc. Rev C DTCGSW60 SERIES 40~60 Watts, AC/DC Desktop Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 03/22/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4