DATASHEET Rev. A PSPDS-15 SERIES 88 ~ 264VAC Input Single Outputs Up to 16.8W Output Power AC/DC Switching Power Supply FEATURES • Single Output • RoHS Compliant • Universal AC Input (Full Range) • High Efficiency and High Reliability • Over Voltage, Over Load, and Short Circuit Protected • Wide Operating Ambient Temperature (-20°C to +70°C) • All Using 105°C Long Life Electrolytic Capacitors • Up to 16.8W Output Power • 100% Full Load Burn-in Tested • Output Voltages Available from 3.3VDC to 24VDC • Dimensions: 3.11” x 2.01” x 1.10” DESCRIPTION The PSPDS-15 series of AC/DC switching power supplies offers up to 16.8W of output power in a 3.11” x 2.01” x 1.10” package. All models have a single output and a universal AC input. Some features include wide operating temperature range (-20°C to +70°C), efficiency up to 83%, and output adjustability. These supplies are RoHS compliant and have UL/cUL, CB, and CE safety approvals. All models are protected against over load, over voltage, and short circuit conditions. All models are 100% full load burn-in tested. 11/15/2010 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 Rev. A PSPDS-15 Series Single Output Up to 16.8 Watts AC/DC Switching Power Supply SPECIFICATIONS: PSPDS-15 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range Input Frequency AC Current Inrush Current (typical) OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Voltage Adjustment Range Line Regulation Load Regulation Output Current Ripple & Noise (See Note 1) Setup Time Hold Up Time Temperature Coefficient Overshoot and Undershoot PROTECTION Over Load Protection Over Voltage Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency (typical) Primary to Secondary Withstand Voltage Primary to PG Secondary to PG Isolation Resistance Input to Output Leakage Current Input to PG ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Working Humidity Storage Humidity Cooling Method MTBF (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Dimensions (L x W x H) Packing SAFETY & EMC (See Note 2) Safety Standards EMI Conduction and Radiation Harmonic Current EMS Immunity 11/15/2010 88 ~ 264VAC 47 to 63Hz 0.7A max 20A @ 115VAC; 40A @ 230VAC Cold Start See Table ±3.0% ±5% of rated output voltage ±1.0% ±2.0% See Table See Table < 2.0s at 115VAC and full load; < 1.0s at 230VAC and full load > 10ms at 115VAC and full load; > 20ms at 230VAC and full load ±0.03%/°C < 5.0% 105% ~ 150% of rated output current, hiccup mode, auto-recovery 105% ~ 150% of rated output voltage, constant voltage Long-term mode, auto-recovery See Table 3000VAC; ≤ 10mA 1500VAC; ≤ 10mA 500VDC; ≤ 10mA ≥ 100MΩ < 0.25mA < 3.5mA -20°C to +70°C -40°C to +85°C 20 ~ 90% RH non-condensing 10 ~ 95% RH non-condensing Free air convection > 100,000 hours @ 25°C and full load 3.11 x 2.01 x 1.10 inches (79 x 51 x 28 mm) 48PCS/CTN, 10.4Kgs, 0.03CBM GB4943-2001, EN60950-1: 2006 Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 PSPDS-15 Series Single Output Up to 16.8 Watts AC/DC Switching Power Supply Rev. A MODEL SELECTION TABLE Model Number Input Voltage PSPDS-15-3.3 Output Voltage Output Current Ripple & Noise (1) -20°C~0°C 0°C~+50°C Output Power Efficiency (230VAC) 3.3 VDC 4A 50mVp-p 50mVp-p 13.2W 70% 5 VDC 3A 50mVp-p 50mVp-p 15W 76% 12 VDC 1.3A 120mVp-p 120mVp-p 15.6W 80% PSPDS-15-15 15 VDC 1A 120mVp-p 120mVp-p 15W 81% PSPDS-15-24 24 VDC 0.7A 120mVp-p 120mVp-p 16.8W 83% PSPDS-15-5 PSPDS-15-12 88 ~ 264 VAC NOTES 1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with 0.1µF and 47µF capacitors in parallel. 2. The SPS is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. DERATING CURVES LOAD (%) OUTPUT VOLTAGE (V) OUTPUT RIPPLE (mVp-p) AMBIENT TEMPERATURE (°C) INPUT VOLTAGE (VAC) 60Hz BLOCK DIAGRAM I/P EMI FILTER RECTIFIERS & FILTER FG O.L.P. 11/15/2010 POWER SWITCHING RECTIFIERS & FILTER PWM CONTROL Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 +V _ V DETECTION CIRCUIT Page 3 of 4 PSPDS-15 Series Single Output Up to 16.8 Watts AC/DC Switching Power Supply Rev. A MECHANICAL DRAWING Unit: inches (mm) 0.28 (7) L CON1 N LED1 V+ 1.0 (25.4) V- 1.98 (50.4) 2 - M3 2.17 (55) 0.41 (10.5) 3.11 (79) 0.55 (14) 1.10 (28) 2 - M3 2.62 (66.5) 1.08 (27.4) 1.10 (28) 0.07 (1.9) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/15/2010 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4