PSM180 SERIES 120~180 Watts, Medical AC/DC Power Supplies Rev B Wall Industries, Inc. FEATURES • RoHS Compliant • 120 Watts Output Power with Convection Cooling • High Power Density • 180 Watts Output Power with 15CFM Forced Air • Power Factor > 0.95 @ 115VAC • Over Voltage, Over Load, and Short Circuit Protection • 3 x 5 Inch Open Frame Footprint • Low Leakage Current < 100µA at 264VAC • 90~264 VAC Input Voltage Range • Medical Body Floating (BF) Rated, MOOP Type • Single Outputs • UL60601-1 3rd ed., EN60601-1 3rd ed., IEC EN60601-1 3rd ed., • 87% High Efficiency Size: 5.00 x 3.00 x 1.18 inches 127.0 x 76.2 x 30.0 mm and CSA-C22.2 No.60601-1 3rd ed. Medical Approvals DESCRIPTION The PSM180 series of AC/DC medical power supplies provides 120 Watts with convection cooling and 180 Watts with 15CFM forced airflow in a compact 3 x 5 inch open frame footprint. This series consists of single output models ranging from 12VDC to 48VDC with a 90~264VAC input voltage range. These supplies also feature a low leakage current of less than 100μA at 264VAC, power factor > 0.95 at 115VAC, and 87% typical efficiency. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSM180 series has UL60601-1 3rd ed., EN60601-1 3rd ed., CSA-C22.2 No.60601-1 3rd ed., and IEC EN60601-1 3rd ed. medical approvals. Weight: 12.3oz (350g) MODEL SELECTION TABLE Output Power (1) Output Current Output Voltage Minimum Load PSM180B-1Y120 12 VDC 0A 10.00A 15.00A 120W PSM180B-1Y150 15 VDC 0A 8.00A 12.00A 19 VDC 0A 6.32A PSM180B-1Y240 24 VDC 0A PSM180B-1Y280 28 VDC PSM180B-1Y480 48 VDC Model Number Input Range PSM180B-1Y190 Ripple & Noise (2) Output Regulation 180W 240mVp-p ±3% 120W 180W 240mVp-p ±3% 9.48A 120W 180W 240mVp-p ±2% 5.00A 7.50A 120W 180W 240mVp-p ±2% 0A 4.29A 6.43A 120W 180W 240mVp-p ±2% 0A 2.50A 3.75A 120W 180W 240mVp-p ±2% Convection 15CFM Forced Air Convection 15CFM Forced Air 90 - 264 VAC NOTES 1. 120W max. with convection cooling and 180W max. with 15CFM minimum forced airflow. 2. Ripple & noise is measured at 20MHz limited bandwidth and with a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output. DERATING CURVES Derating Curve with 15CFM Forced Air 120 120 100 100 Output Power (%) Output Power (%) Derating Curve with Convection Cooling 80 60 40 20 60 40 20 0 0 0 10 20 30 40 50 60 Ambient Temperature (°C) 04/30/2014 80 70 80 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev B Wall Industries, Inc. PSM180 SERIES 120~180 Watts, Medical AC/DC Power Supplies SPECIFICATIONS: PSM180 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (rms) Inrush Current Power Factor Correction 115VAC and full load 3 230VAC and full load 1.5 115VAC, cold start, 25°C 50 230VAC, cold start, 25°C 100 115VAC and full load 0.95 230VAC and full load 0.90 A A OUTPUT SPECIFICATIONS Output Voltage See Table Output Regulation See Table Output Power Convection cooling 120 15CFM forced air cooling 180 Output Current W See Table Minimum Load 0 Ripple & Noise (20MHz BW) Measured at 20MHz limited bandwidth and with a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output Hold-up Time 115VAC and full load % 240 mVp-p 20 ms PROTECTION Over Voltage Protection Over Load Protection Latching type, AC recycle automatic recovery 110 Short Circuit Protection 150 % automatic recovery GENERAL SPECIFICATIONS Efficiency 115VAC and full load 87 Convection cooling Derating linearly 2.5% per °C from 41°C to +60°C 0 % ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature 15CFM forced air Derating linearly 2.5% per °C from 51°C to +60°C Storage Temperature Range Humidity Non-condensing MTBF Full load and 25°C ambient temperature +60 °C 0 +60 °C -40 +85 °C 5 95 % 100,000 hours PHYSICAL SPECIFICATIONS Weight 12.3oz (350g) Dimensions (L x W x H) 5.00 x 3.00 x 1.18 inch (127.0 x 76.2 x 30.0 mm) Input Connector (CN1) Mates with JST VHR-3N or equivalent JST B3P-VH-B pitch: 3.96mm or equivalent Output Connector (CN2) Mates with JST VHR-6N or equivalent JST B6P-VH-B pitch: 3.96mm or equivalent SAFETY & EMC Safety Approvals EMC Standards 04/30/2014 UL60601-1 3rd ed.., EN60601-1 3rd ed., CSA-C22.2 No.60601-1 3rd ed., and IEC EN60601-1 3rd ed. EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 PSM180 SERIES 120~180 Watts, Medical AC/DC Power Supplies Rev B Wall Industries, Inc. MECHANICAL DRAWING Unit: inches [mm] 5.00 [127.0] 4.55 [115.6] 0.22 [5.7] 0.22 [5.7] CN2 1 2 3 4 5 6 2.55 [64.8] 3.00 [76.2] 0.22 [5.7] CN1: INPUT CONNECTOR Signal AC Neutral AC Line JST B3P-VH-B pitch: 3.96mm or equivalent, mates with JST VHR-3N or equivalent CN2: OUTPUT CONNECTOR Pin No. Signal 1 GND 2 GND 3 GND 4 +Vo 5 +Vo 6 +Vo 2 1 CN1 0.22 [5.7] 4X Ø3.5 Mounting Holes JST B3P-VH-B pitch: 3.96mm or equivalent, mates with JST VHR-3N or equivalent 0.087 [2.2] 3.00 [76.2] Pin No. 1 2 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 04/30/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3