Open Frame (Suffix “-O”) PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies Rev A Wall Industries, Inc. FEATURES Size: 4.00 x 2.00 x 1.14 inches U-Chassis (Suffix “-U”) • RoHS Compliant • MTBF > 100,000 Hours • Single Outputs • High Efficiency up to 85% • PF > 0.9 at 115/230VAC • Over Voltage, Over Load, and Short Circuit Protection • 100 Watts with Convection Cooling • UL60950-1, Nemko EN60950-1, & CB IEC60950-1 Safety Approvals • 150 Watts with Forced Air Cooling • 100% Burn-in and Hi-pot Tested • 90~264 VAC Input Voltage Range • Open Frame and U-Chassis Mechanical Options Available DESCRIPTION The PSPW150 series of AC/DC power supplies provides 100 Watts of output power with convection cooling and 150 Watts with 12CFM forced airflow. This series consists of 12V, 15V, 19V, 24V, 28V, and 48VDC single output models with a 90-264VAC full range input which enables them to be used anywhere in the world. These supplies also feature a high efficiency up to 85% and a power factor > 0.9 at 115/230VAC. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSPW150 series has UL60950-1, CSA-C22.2 NO.950-1, Nemko EN60950-1, and CB IEC60950-1 safety approvals. This series is also CE marked and meets EN55022 Class B, CISPR22 Class B, and FCC Part 15 Class B EMC standards. Both open frame and U-chassis mechanical options are available for this series. Size: 4.12 x 2.24 x 1.38 inches MODEL SELECTION TABLE Model Number Input Voltage Output Voltage Output Current Output Power Convection 12 CFM Forced Air Convection 12 CFM Forced Air ±3% 8.33A PSPW150B-1Y15-O 15 VDC 6.67A 10A 100W 150W 150mVp-p ±3% PSPW150B-1Y19-O 19 VDC 5.26A 7.89A 100W 150W 190mVp-p ±3% 24 VDC 4.16A 6.25A 100W 150W 240mVp-p ±3% PSPW150B-1Y28-O 28 VDC 2.77A 4.16A 100W 150W 300mVp-p ±2% PSPW150B-1Y48-O 48 VDC 2.08A 3.12A 100W 150W 300mVp-p ±2% PSPW150B-1Y12-U 12 VDC 8.33A 12.5A 100W 150W 150mVp-p ±3% PSPW150B-1Y15-U 15 VDC 6.67A 10A 100W 150W 150mVp-p ±3% PSPW150B-1Y19-U 19 VDC 5.26A 7.89A 100W 150W 190mVp-p ±3% 24 VDC 4.16A 6.25A 100W 150W 240mVp-p ±3% PSPW150B-1Y28-U 28 VDC 2.77A 4.16A 100W 150W 300mVp-p ±2% PSPW150B-1Y48-U 48 VDC 2.08A 3.12A 100W 150W 300mVp-p ±2% 90 - 264 VAC PSPW150B-1Y24-U 150W 150mVp-p 12 VDC 90 - 264 VAC 100W Output Regulation PSPW150B-1Y12-O PSPW150B-1Y24-O 12.5A Ripple & Noise Package Type Open Frame U-Chassis DERATING CURVE 175 Convection Cooling: 0 to +60°C derating linearly 2.5% per °C from +41°C to +60°C Output Power (W) 150 12 CFM Forced Air 12CFM Forced Air: 125 0 to +70°C derating linearly 2.5% per °C from +51°C to +70°C 100 Convection Cooling 75 50 25 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev A Wall Industries, Inc. PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies SPECIFICATIONS: PSPW150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS TEST CONDITIONS Min Typ Max Unit Input Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (rms) Inrush Current Power Factor Correction 115VAC and full load 2.5 230VAC and full load 1.25 115VAC, cold start, 25°C 40 115VAC, cold start, 25°C 80 115/230VAC and full load A A 0.9 OUTPUT SPECIFICATIONS Output Voltage See Table Output Regulation See Table Output Power Convection cooling 100 With 12CFM forced air 150 Output Current W See Table Minimum Load 0 Ripple & Noise Hold-up Time % 12V output model 150 15V output model 150 Measured at 20MHz limited bandwidth and 19V output model with 0.1μF ceramic and 10μF electrolytic 24V output model capacitors in parallel across the output 28V output model 190 48V output model 300 mVp-p 240 300 115VAC and full load 16 Automatic recovery 105 ms PROTECTION Over Voltage Protection Over Load Protection Automatic recovery Short Circuit Protection 160 % Automatic recovery GENERAL SPECIFICATIONS Efficiency 115VAC and full load 85 % ENVIRONMENTAL SPECIFICATIONS Operating Temperature Convection cooling: 100W (with derating) 0 +60 12CFM forced air: 150W (with derating) 0 +70 -10 +85 5 95 Storage Temperature Range Humidity Non-condensing MTBF Full load, 25°C ambient temperature 100,000 °C °C % hours PHYSICAL SPECIFICATIONS Open Frame Models (Suffix “-O”) Weight U-Chassis Models (Suffix “-U”) Dimensions (L x W x H) 7.27oz (206g) 9.70oz (275g) Open Frame Models (Suffix “-O”) 4.00 x 2.00 x 1.14 in (101.6 x 50.8 x 29.0 mm) U-Chassis Models (Suffix “-U”) 4.12 x 2.25 x 1.38 in (104.6 x 57.0 x 35.0 mm) SAFETY & EMC Safety Approvals EMC Standards 07/29/2013 UL60950-1, CSA-C22.2 NO.950-1, Nemko EN60950-1, CB IEC60950-1 EN55022 Class B, CISPR22 Class B, FCC Part 15 Class B, CE Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies MECHANICAL DRAWING U-CHASSIS MODELS (SUFFIX “-U”) 2.24 (57.0) 4.12 (104.6) Unit: inches (mm) 1 2 3 4 5 CN2 6 L CN1 N CN1: INPUT CONNECTOR Pin No. Function 1 AC (N) 2 AC (L) JST B3P-VH-B pitch: 7.92mm or equivalent, mates with JST VHR-3N or equivalent 1.38 (35.0) CN2: OUTPUT CONNECTOR Pin No. Function 1 GND 2 GND 3 GND 4 +Vo 5 +Vo 6 +Vo JST B6P-VH-B pitch: 3.96mm or equivalent, mates with JST VHR-6N or equivalent 1.06 (27.0) 2X M3 P0.5 for mounting 1.03 (26.1) 2.96 (75.1) 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies MECHANICAL DRAWING OPEN FRAME MODELS (SUFFIX “-O”) 4.00 (101.6) 3.72 (94.6) 1.72 (43.8) CN1: INPUT CONNECTOR 1 2 3 4 5 CN2 6 L CN1 N 0.14 (3.5) 0.14 (3.5) 2.00 (50.8) Unit: inches (mm) Pin No. Function 1 AC (N) 2 AC (L) JST B3P-VH-B pitch: 7.92mm or equivalent, mates with JST VHR-3N or equivalent CN2: OUTPUT CONNECTOR 0.14 (3.5) 0.12 (3.0) 1.14 (29.0) 4X Ø0.138 (Ø3.5) mounting holes Pin No. Function 1 GND 2 GND 3 GND 4 +Vo 5 +Vo 6 +Vo JST B6P-VH-B pitch: 3.96mm or equivalent, mates with JST VHR-6N or equivalent COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/29/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4