PSIM280B SERIES 280 Watts AC/DC Open Frame Medical Power Supply Single Output Rev A FEATURES • Both ITE and Medical Approvals • High Power Density, 280W in 5” x 3” Footprint • Medical Applications Protection: Means of Patient Protection (MOPP) • Altitude During Operation: ITE up to 5000m, Medical below 3000M • Meets Medical BF Rating • Main Output and Standby Output Power ON LED Indicators • Remote Control (Inhibit) Function • RoHS Compliant • Wide Input Range of 90-264VAC DESCRIPTION The PSIM280B series of medical open frame power supplies offers 280 watts of output power in a highly reliable 5" x 3" x 1.18" package. This series consists of single outputs, an input voltage range of 90-264VAC, and a frequency of 47-63Hz. All models are RoHS compliant, have high efficiency above 91%, and meets medical BF rating. Models are equipped with remote control (inhibit) function and LED indicators. Size: 5in x 3in x 1.18in MODEL SELECTION TABLE Input Voltage Range Model Number(1) PSIM280B-1Y120Z PSIM280B-1Y240Z PSIM280B-1Y280Z 90-264VAC PSIM280B-1Y480Z PSIM280B-1Y540Z Output Voltage 12V 24V 28V 48V 54V Maximum Load (V1) 18 CFM Convection Forced Air 17.5A 23.33A 8.75A 11.66A 7.5A 10A 4.375A 5.83A 3.88A 5.18A Ripple & Noise(4) 150mV 240mV 280mV 300mV 400mV Output Regulation (V1) ±3% ±3% ±2% ±2% ±2% Output Power(3) 280W 280W 280W 280W 280W Standby Supply (V2) 5V/0.5A 5V/0.5A 5V/0.5A 5V/0.5A 5V/0.5A Fan Output Efficiency (V3)(2) 12V/0.3A 12V/0.3A 12V/0.3A >91% 12V/0.3A 12V/0.3A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Power Factor Inrush current Input Current (rms) Earth Leakage Current OUTPUT SPECIFICATIONS Output Voltage Hold Up Time Remote Control Output Power Typ 90 47 @115VAC @230VAC @Full Load @115VAC @230VAC cold start @25ºC @115VAC @230VAC @264VAC Humidity Non-Condensing MTBF @Full Load and 25ºC ambient temperature per Telcordia (Bellcore) Max Unit 264 63 VAC Hz > 0.95 > 0.90 <30 <60 A Peak 3.5 2 @Full Load, 115VAC Inhibit Function Forced Air Convection Cooling Maximum Capacitive Load Ripple & Noise (20MHz bandwidth) PROTECTION Short Circuit Protection Over Load Protection 105% to 150% maximum rating Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Refer to Derating curve Storage Temperature 4/22/2016 Min A <100 uA See Table >10 ms 280 210 See Table See Table Watts Auto Recovery Auto Recovery Latching type. AC Recycle 0 -20 70 85 0 90 >200,000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] ºC ºC % hours Page 1 of 5 PSIM280B SERIES 280 Watts AC/DC Open Frame Medical Power Supply Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS GENERAL SPECIFICATIONS Efficiency PHYSICAL SPECIFICATIONS Weight @Full Load, 230VAC Min Typ Max Unit >91 % 0.775 lbs. 5in x 3in x 1.18in (127mm x 76.2mm x 30mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS UL60601-1 3rd Edition UL/c-UL UL60950-1 EN60601-1 3rd Edition TUV EN60950-1 IEC EN60601-1 3rd Edition CB IEC60950-1 EN60601-1-2 EN55024 EN 55011 EN55022 FCC Part 15 FCC Part 18 CE Safety Approvals EMC Class B Class B Class B Class B NOTES (1) (2) (3) (4) Output connector options: Z=T (Terminal block type, pitch 8.25mm) Suitable for all voltages, Z=M (Mini-fit type, pitch 4.2mm), or Z=C (Connector type, pitch=3.69mm): Suitable for 24V and up. All models are equipped with 5Vsb & 12V fan outputs. a. 5Vsb meets ErP 0.5W @ No Load All models have total power 210W max. convection or 280W max. forced air cooling. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector. DERATING CURVES Power Derating Curve 4/22/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 Rev A PSIM280B SERIES 280 Watts AC/DC Open Frame Medical Power Supply Single Output MECHANICAL DRAWINGS Mechanical Specification Main Output Optional Type (CN3) 4/22/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 Rev A PSIM280B SERIES 280 Watts AC/DC Open Frame Medical Power Supply Single Output Matching Connectors 4/22/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev A PSIM280B SERIES 280 Watts AC/DC Open Frame Medical Power Supply Single Output DC Fan Recommended Direction COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 4/22/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5