MAPU01H SERIES DC/DC CONVERTER 1W, SIP-Package, High Isolation FEATURES ►Industrial Standard SIP-7 Package ►I/O Isolation 3000VDC ►Operating Ambient Temp. Range -40℃ to +90℃ ►Overload and Short Circuit Protection ►UL/cUL/IEC/EN 62368-1 (60950-1) Safety Approval (Pending) & CE Marking PRODUCT OVERVIEW The MINMAX MAPU01H series is a new range of isolated 1W DC/DC converter modules in SIP-7 package which feature a high I/O isolation voltage rated for 3000VDC and there are 32 models available for 3.3, 5, 12 or 24VDC input. Advanced circuit topology provides continuous overload, short circuit protection and a high efficiency up to 82% which allows operating ambient temperatures range of -40°C to +85°C without power derating. These converters offer a cost-effective solution for all applications where a high I/O isolation and fault condition protection are required. Model Selection Guide Model Number MAPU01-033S033H MAPU01-033S05H MAPU01-033S09H MAPU01-033S12H MAPU01-033S15H MAPU01-033D05H MAPU01-033D12H MAPU01-033D15H MAPU01-05S033H MAPU01-05S05H MAPU01-05S09H MAPU01-05S12H MAPU01-05S15H MAPU01-05D05H MAPU01-05D12H MAPU01-05D15H MAPU01-12S033H MAPU01-12S05H MAPU01-12S09H MAPU01-12S12H MAPU01-12S15H MAPU01-12D05H MAPU01-12D12H MAPU01-12D15H MAPU01-24S033H MAPU01-24S05H MAPU01-24S09H MAPU01-24S12H MAPU01-24S15H MAPU01-24D05H MAPU01-24D12H MAPU01-24D15H Input Voltage (Range) Output Voltage VDC VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 (2.97 ~ 3.63) 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) Output Current Input Current Max. Min. @Max. Load @No Load mA 300 200 110 84 67 ±100 ±42 ±33 300 200 110 84 67 ±100 ±42 ±33 300 200 110 84 67 ±100 ±42 ±33 300 200 110 84 67 ±100 ±42 ±33 mA 6 4 2.2 1.68 1.34 ±2 ±0.84 ±0.66 6 4 2.2 1.68 1.34 ±2 ±0.84 ±0.66 6 4 2.2 1.68 1.34 ±2 ±0.84 ±0.66 6 4 2.2 1.68 1.34 ±2 ±0.84 ±0.66 mA(typ.) 390 394 385 382 386 394 387 380 261 256 247 246 241 247 249 244 104 104 101 99 100 103 102 102 54 51 52 51 51 52 52 52 mA(typ.) 45 30 17 10 Load Regulation Max. capacitive Load % (max.) 15 12 12 10 10 11 9 9 12 10 8 8 8 10 8 9 10 8 7 7 7 7 6 6 10 8 8 8 9 8 8 8 μF @Max. Load 220 100# 220 100# 220 100# 220 100# # For each output E-mail:[email protected] 2016/02/16 P0 Tel:886-6-2923150 Page 1 of 3 Efficiency (typ.) % 77 77 78 80 79 77 79 79 76 78 81 82 83 81 81 81 79 80 82 84 83 81 82 82 76 81 79 82 82 80 81 80 MAPU01H SERIES DC/DC CONVERTER 1W, SIP-Package, High Isolation Input Specifications Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Input Filter Model Min. Typ. Max. 3.3V Input Models 2.97 3.3 3.63 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 3.3V Input Models -0.7 --- 6 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 All Models Unit VDC Internal Capacitor Output Specifications Parameter Conditions Min. Typ. Max. Unit --- ±1.0 ±3.0 % Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=10% to 100% Ripple & Noise 0-20 MHz Bandwidth Output Voltage Setting Accuracy Output Voltage Balance Temperature Coefficient Over Load Protection Normal Vin at 25℃ Short Circuit Protection See Model Selection Guide --- 65 100 mV P-P --- ±0.01 ±0.02 %/℃ --- 160 --- % Continuous, Automatic Recovery General Specifications Parameter Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --- 20 --- pF 40 75 110 KHz I/O Isolation Voltage Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign TBD ----UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1(CB-report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB-report) Safety Approvals (Pending) Hours Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Conditions Min. Max. Unit Natural Convection -40 +90 ℃ ℃ Case Temperature --- +95 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Natural Convection Lead Temperature (1.5mm from case for 10Sec.) --- EMC Specifications Parameter EMI Conduction EN55024 ESD Radiated immunity Fast transient (6) Surge (6) Conducted immunity PFMF EMS E-mail:[email protected] 2016/02/16 P0 Tel:886-6-2923150 Page 2 of 3 Standards & Level EN55022, FCC part 15 EN61000-4-2 Air ± 8kV , Contact ± 6kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 3A/m Performance Class A (5) A A A A A A MAPU01H SERIES DC/DC CONVERTER 1W, SIP-Package, High Isolation Power Derating Curve 100 Natural Convection 20LFM Output Power (%) 80 60 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature C Notes 1 2 3 4 5 6 7 8 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory. To meet EN55022 Class A an external filter, please contact MINMAX. To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required.Suggested capacitor:TBD. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Pin Connections 0.5 [0.02] 10.2 [0.40] 3.2 [0.13] 0.5 [0.02] 19.5 [0.77] 2.54 [0.10] 7.62 [0.30] Pin Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout 6 No Pin Common 7 +Vout +Vout 2X2.54 2X[0.10] 7.1 [0.28] 18.5 [0.73] Bottom View 6 7 0.50 [0.02] 2.0 [0.08] 5 2 0.25 [0.01] 1 ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ► Pins ±0.05(±0.002) Physical Characteristics Case Size : 19.5x7.1x10.2mm (0.77x0.28x0.40 inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Tinned Copper Weight : 3.1g 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2016/02/16 P0 Page 3 of 3