PHE844

Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Overview
Applications
The PHE844 Series is constructed of metallized polypropylene
film encapsulated with self-extinguishing resin in a box of material
meeting the requirements of UL 94 V–0.
For use as a electromagnetic interference (EMI) suppression
filter in across-the-line applications requiring X1 safety
classification. Suitable for use in situations where failure of the
capacitor would not lead to danger of electric shock.
Benefits
• Approvals: ENEC, UL, cUL
• Class X1 (IEC 60384-14)
• Rated Voltage: 440 VAC 50/60 Hz (ENEC), 480VAC
50/60 Hz (UL, cUL)
• Capacitance range: 0.1 – 2.2 µF
• Lead spacing: 22.5 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/105/56/B, IEC 60068-1
• Tape and reel in accordance with IEC 60286-2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +105˚C
• 100% screening factory test at 3,000 VDC
• Self-healing properties
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Legacy Part Number System
PHE844
R
D
6100
M
R06L2
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Capacitance Code (pF)
Capacitance
Tolerance
Packaging
X1, Metallized
Polypropylene
R = 440
D = 22.5
F = 27.5
R = 37.5
The last three digits
represent significant
figures. The first digit
specifies the total
number of digits.
K = ±10%
M = ±20%
See Ordering Options
Table
New KEMET Part Number System
F
844
D
H
104
M
440
C
Capacitor
Class
Series
Lead Spacing
(mm)
Size Code
Capacitance Code (pF)
Capacitance
Tolerance
Rated Voltage
(VAC)
Packaging
D = 22.5
F = 27.5
R = 37.5
See
Dimension
Table
First two digits represent
significant figures. Third digit
specifies number of zeros.
F = Film
X1, Metallized
Polypropylene
K = ±10%
M = ±20%
440 = 440
See Ordering
Options Table
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
1
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
6 +0/-1
C
R06L2(1)
Pizza Pack
6 +0/-1
Z
R06L2(1)
Bulk (Tray)–Long Leads
30 +0/-1
ALW0L
R30L2
Tape & Reel (Standard Reel)
H0= 18.5 +/-0.5
L
R17T0
Tape & Reel (Large Reel)
H0= 18.5 +/-0.5
P
R17T1
6 +0/-1
C
R06L2(1)
6 +0/-1
30 +0/-1
H0= 18.5 +/-0.5
Z
ALW0L
P
R06L2(1)
R30L2
R17T1
6 +0/-1
C
R06L2(1)
6 +0/-1
Z
R06L2(1)
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
22.5
Other Lead and Packaging Options
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
27.5
Other Lead and Packaging Options
Pizza Pack
Bulk (Tray)–Long Leads
Tape & Reel (Large Reel)
Standard Lead and Packaging Options
37.5
Bulk (Tray)–Short Leads
Other Lead and Packaging Options
Pizza Pack
(1) Please specify Bulk (Tray) or Pizza Packaging
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
2
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
B
H
d
0.5
LL
p
p
B
H
L
d
KEMET Size
Code
Legacy Size
Code
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
DH
DM
DT
DW
DY
FE
FK
FM
FR
FV
RF
RH
RM
RP
D14
D15
D16
D20
D19
F11
F03
F13
F14
F16
R05
R04
R03
R06
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.5
+/- 0.5
+/- 0.5
+/- 0.5
8.0
9.0
11.0
13.5
15.5
10.5
13.5
14.5
17.5
21.0
13.0
15.0
19.0
21.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
16.0
18.5
21.5
23.0
24.5
20.5
23.0
24.5
28.0
30.0
24.0
26.0
36.0
38.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
3
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Rated Voltage (VR)
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type. Series design.
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
440 VAC 50/60 Hz (ENEC) - 480 VAC 50/60 Hz (UL,cUL)
Capacitance Range
0.10 µF to 2.2 µF
Capacitance Values
E6 series (IEC 60063)
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
Related Documents
±20% standard, ±10% option
-40°C to 105°C
40/105/56/B IEC 60068-1
ENEC, UL, cUL
EN/IEC 60384-14:2005, UL 60384-14, CAN/CSA E60384-14:09
Maximum Values at +23°C
Dissipation Factor (tanδ)
Test Voltage Between Terminals
Resonance Frequency
Frequency
C ≤ 0.1 μF
0.1 µF < C ≤ 1 µF
C > 1 µF
1 kHz
0.1%
0.1%
0.1%
10 kHz
0.2%
0.4%
0.8%
100 kHz
0.6%
-
-
The 100% screening factory test is carried out at 3,000 VDC. The voltage level is selected to meet the requirements in
applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this
test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures.
Tabulated self-resonance frequencies fo (see Table 1 - Ratings & Part Number Reference)
Measured at +25°C ±5°C, according to IEC 60384–2
Insulation Resistance
In DC Applications
Minimum Values Between Terminals
C ≤ 0.33 μF
C > 0.33 μF
≥ 30,000 MΩ
≥ 10,000 MΩ • µF
Recommended voltage ≤ 1,000 VDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
4
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Environmental Test Data
Test
IEC Publication
Procedure
Endurance
IEC 60384-14:2005
Vibration
IEC 60068–2–6 Test Fc
Bump
IEC 60068-2-29 Test Eb
Change of Temperature
IEC 60068-2-14 Test Na
Active Flammability
IEC 60384-14:2005
VR + 20 surge pulses at 4 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384-14:2005
IEC 60384–1, IEC 60695–11–5 Needle Flame Test
Damp Heat Steady State
IEC 60068-2-78 Test Cab
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
No visible damage. No open or short circuit.
1,000 bumps at 390 m/s2
No visible damage. No open or short circuit.
Upper and lower rated temperature 5 cycles
No visible damage.
+40°C and 90 – 95% RH, 56 days
Approvals
Certification Body
Mark
Specification
File Number
Intertek Semko AB
EN/IEC 60384-14
SE/0140–1C
UL
UL 60384 and
CAN/CSA E60384-14:09
(480 VAC)
E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
5
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Table 1 – Ratings & Part Number Reference
Max Dimensions in mm
Capacitance
Size Code
Value (µF) (New/Legacy)
B
H
L
Lead
Spacing (p)
fo
dV/dt
(MHz) (V/µs)
New KEMET
Part Number
Legacy Part
Number
0.10
0.15
0.22
0.33
0.47
0.22
0.33
0.47
0.68
1.0
0.47
0.68
1.0
1.5
2.2
DH/D14
DM/D15
DT/D16
DW/D20
DY/D19
FE/F11
FK/F03
FM/F13
FR/F14
FV/F16
RF/R05
RF/R05
RH/R04
RM/R03
RP/R06
8.0
9.0
11.0
13.5
15.5
10.5
13.5
14.5
17.5
21.0
13.0
13.0
15.0
19.0
21.0
16.0
18.5
21.5
23.0
24.5
20.5
23.0
24.5
28.0
30.0
24.0
24.0
26.0
36.0
38.0
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
41.0
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
3.2
2.6
2.1
1.8
1.5
2.2
1.7
1.4
1.1
1.0
1.3
1.1
0.92
0.74
0.60
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
F844DH104(1)440(2)
F844DM154(1)440(2)
F844DT224(1)440(2)
F844DW334(1)440(2)
F844DY474(1)440(2)
F844FE224(1)440(2)
F844FK334(1)440(2)
F844FM474(1)440(2)
F844FR684(1)440(2)
F844FV105(1)440(2)
F844RF474(1)440(2)
F844RF684(1)440(2)
F844RH105(1)440(2)
F844RM155(1)440(2)
F844RP225(1)440(2)
PHE844RD6100(1)(2)
PHE844RD6150(1)(2)
PHE844RD6220(1)(2)
PHE844RD6330(1)(2)
PHE844RD6470(1)(2)
PHE844RF6220(1)(2)
PHE844RF6330(1)(2)
PHE844RF6470(1)(2)
PHE844RF6680(1)(2)
PHE844RF7100(1)(2)
PHE844RR6470(1)(2)
PHE844RR6680(1)(2)
PHE844RR7100(1)(2)
PHE844RR7150(1)(2)
PHE844RR7220(1)(2)
Capacitance
Value (µF)
Size Code (New/
Legacy)
B (mm)
H (mm)
L (mm)
Lead Spacing (p)
fo (MHz)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part Number
(1) M = ±20%, K = ±10%.
(2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
6
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
First wave
Temperature (°C)
Recommended Soldering Temperature
Soldering iron bit temperature (deg C)
400
350
300
250
Second wave
200
Cooling
ΔT <150°C
Preheating
150
ca 2°C/s
ca 3.5°C/s typical
Tpreheat
100
ca 5°C/s
115°C max
100°C
Typical
200
50
150
100
0
0
50
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
The soldering iron tip temperature should be set
at 350°C (+10°C maximum) with the soldering
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
7
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Paper
130°C
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be
soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
8
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Construction
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Detailed Cross Section
Molded Plastic
Case
Self-Extinguishing
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
Margin
FILM WINDING SCHEME OPTIONS
Leads
tallized Polypropylene Film
Double-sided Metallized Polyester Film
Winding Scheme
sided
zed
ylene
m
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
3 Sections
©Metallized
KEMET Electronics
Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Polyphenylene
Sulfide Film (SMR)
2 Sections
1 Section
2 Sections
sided
zed
ylene
m
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
4 Sections
F3108_PHE844_X1_440-480 • 5/15/2015
Polypropylene Film/Foil
9
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Marking
FRONT
TOP
RIFA
Logo
Approval
Mark
Series
Rated
Voltage
IEC
Climatic
Category
Capacitance
Approval
Mark
Capacitance
Tolerance
Manufacturing
Date Code
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
H
J
K
L
M
January
February
March
April
May
June
July
August
September
October
November
December
1
2
3
4
5
6
7
8
9
O
N
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
10
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Packaging Quantities
KEMET
Legacy
Size Code Size Code
DD
DH
DM
DT
DF
DR
DY
DW
D13
D14
D15
D16
D17
D18
D19
D20
FK
FE
FG
FM
FR
FS
FV
FH
FT
FQ
F03
F11
F12
F13
F14
F15
F16
F17
F18
F19
RK
RM
RH
RF
RP
RS
R02
R03
R04
R05
R06
R08
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Standard
Reel
ø 360 mm
Large
Reel
ø 500 mm
Ammo
Bulk
(Pizza)
22.5
6.5
8.0
9.0
11.0
7.0
10.5
15.5
13.5
14.5
16.0
18.5
21.5
16.5
19.0
24.5
23.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
234
186
308
253
216
264
176
209
300
250
250
200
300
200
110
160
600
500
500
400
600
400
250
300
440
352
308
253
396
264
176
209
23.0
20.5
22.5
24.5
28.0
29.0
30.0
12.5
18.5
16.0
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
171
216
198
153
126
117
108
108
72
81
250
350
300
250
27.5
13.5
10.5
11.5
14.5
17.5
19.0
21.0
21.0
31.0
27.5
171
216
198
153
126
117
108
108
72
81
37.5
16.5
19.0
15.0
13.0
21.0
28.0
32.0
36.0
26.0
24.0
38.0
43.0
41.0
41.0
41.0
41.0
41.0
41.0
105
91
119
140
84
54
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
105
91
119
140
84
54
F3108_PHE844_X1_440-480 • 5/15/2015
11
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, 0Class X1, 440/480 VAC, 105°C
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 22.5 – 27.5 mm
0
rom 10 and
15 mmSpecification
to 7.5 mm
Taping
Description
Dimensions (mm)
Symbol
Lead Space
22.5
27.5
Tolerance
Lead spacing
F
22.5
27.5
+0.6/-0.1
Carrier tape width
W
18
18
+1/-0.5
Hold down tape width
W0
10
10
Minimum
Hole position
W1
9
9
+ 0.75/-0.5
Hold down tape position
W2
3
3
Maximum
Feed hole diameter
D0
4
4
± 0.2
Feed hole lead space*
P0
12.7
12.7
± 0.2**
Centering of the lead wire
P1
7.8
5.3
± 0.7
Component alignment
∆h
2
2
±2
Deviation tape – plane
∆p
1.3
1.3
Maximum
t
0.9
0.9
Maximum
H0***
18.5
18.5
± 0.5
Tape thickness
Height of component
from tape center
*Available also 15mm.
**Maximum 1 mm on 20 lead spaces.
*** H0 = 16.5 mm is available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
12
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg,Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
13
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot
berequired.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
14