AC Line EMI Suppression and RC Networks F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Overview Applications Metallized polypropylene film encapsulated with selfextinguishing resin in a box of material recognized to UL 94 V–0. For worldwide use as electromagnetic interference (EMI) suppression filter in across-the-line applications requiring X1 safety classification. Benefits • • • • • • • • • • Approvals: ENEC, UL, cUL, CQC Rated voltage: 760 VAC 50/60 Hz Capacitance range: 0.01 – 1.8 µF Lead spacing: 22.5 – 37.5 mm Capacitance tolerance: ±20%, ±10% Climatic category 40/110/56, IEC 60068–1 Tape and reel in accordance with IEC 60286–2 RoHS Compliant and lead-free terminations Operating temperature range of -40˚C to +110˚C 100% screening factory test at 4,250 VDC Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System F 873 D U 104 M 760 C Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Voltage (VAC) Packaging F = Film X1, Metallized Polypropylene 760 See Ordering Options Table D = 22.5 F = 27.5 R = 37.5 See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 1 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code Pizza – Long Leads Pizza Pack 17 +0/-1 4 +2/-0 ZLH0J Z Other Lead and Packaging Options Tape & Reel (Standard Reel) Tape & Reel (Large Reel) Ammo Pack H0= 18.5 +/-0.5 H0= 18.5 +/-0.5 H0= 18.5 +/-0.5 L P R Pizza – Long Leads 17 +0/-1 ZLH0J Pizza Pack 4 +2/-0 Z Pizza – Long Leads 17 +0/-1 ZLH0J Pizza Pack 4 +2/-0 Z Type of Leads and Packaging Standard Lead and Packaging Options 22.5 Standard Lead and Packaging Options 27.5 Standard Lead and Packaging Options 37.5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 2 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p Size Code DB DI DH DJ DM DO DP DU DY FB FC FI FN FO FR FS FY FH FQ FT RB RF RH RC RD RP RO RU RV RW Version High Profile Low Profile Low Profile Low Profile Low Profile Low Profile p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 6.0 7.0 8.0 8.5 9.0 10.0 11.0 13.0 15.5 9.0 11.0 13.0 14.0 17.0 17.5 19.0 22.0 21.0 27.5 31.0 11.0 13.0 15.0 16.0 19.0 21.0 24.0 30.0 24.0 24.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 14.5 16.0 16.0 17.0 18.5 18.5 20.0 22.0 24.5 17.0 20.0 25.0 28.0 40.0 28.0 29.0 37.0 12.5 16.0 19.0 22.0 24.0 26.0 28.5 32.0 38.0 44.0 45.0 15.0 19.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1 1 1 1 1 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 3 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Performance Characteristics Rated Voltage 760 VAC 50/60 Hz Capacitance Range 0.01 – 1.8 µF Capacitance Tolerance ±20%, ±10% Temperature Range Climatic Category Approvals -40ºC to +110°C 40/110/56 ENEC, UL, cUL, CQC Maximum Values at +23°C Dissipation Factor 1 kHz Test Voltage Between Terminals C ≤ 0.1 µF C > 0.1 µF 0.1% 0.1% The 100% screening factory test is carried out at 4,250 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Between Terminals: Insulation Resistance In DC Applications C ≤ 0.33 µF ≥ 30,000 MΩ C > 0.33 µF ≥ 10,000 MΩ • µF Recommended voltage ≤ 1,500 VDC Impedance Graph © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 4 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Environmental Test Data Test IEC Publication Procedure 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Endurance IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 4 kV (pulse every 5 seconds) Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle-flame test Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days Approvals Mark Specification File Number EN/IEC 60384–14 CA08.00188 UL 60384–14 and CAN/CSA–E60384–14 E97797 IEC 60384–14 CQC12001084815 CQC12001084817 CQC12001084814 CQC12001084820 CQC12001086324 CQC12001088068 Environmental Compliance All new KEMET EMI capacitors are RoHS Compliant and Halogen Free. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 5 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Size Code 0.01 0.012 0.015 0.018 0.022 0.025 0.025 0.027 0.033 0.039 0.047 0.047 0.056 0.056 0.068 0.082 0.082 0.1 0.1 0.12 0.15 0.18 0.056 0.068 0.082 0.082 0.1 0.1 0.12 0.12 0.15 0.15 0.18 0.22 0.22 0.22 0.25 0.25 0.25 0.25 0.27 0.27 0.27 0.33 0.33 0.33 0.33 0.39 0.39 0.39 0.47 0.56 0.15 0.18 0.22 0.22 0.25 0.25 Capacitance Value (µF) Maximum Dimensions in mm Lead Spacing (p) dV/dt (V/µs) Part Number B H L DB DB DB DB DB DB DI DI DI DI DH DJ DJ DM DO DO DP DP DU DU DY DY FB FB FB FC FC FH FC FH FH FI FI FI FN FQ FN FO FQ FR FO FR FT FO FR FS FT FO FS FY FY FY RB RB RB RV RF RV 6 6 6 6 6 6 7 7 7 7 8 8.5 8.5 9 10 10 11 11 13 13 15.5 15.5 9 9 9 11 11 21 11 21 21 13 13 13 14 27.5 14 17 27.5 17.5 17 17.5 31 17 17.5 19 31 17 19 22 22 22 11 11 11 24 13 24 14.5 14.5 14.5 14.5 14.5 14.5 16 16 16 16 16 17 17 18.5 18.5 18.5 20 20 22 22 24.5 24.5 17 17 17 20 20 12.5 20 12.5 12.5 25 25 25 28 16 28 40 16 28 40 28 19 40 28 29 19 40 29 37 37 37 22 22 22 15 24 15 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41 41 41 41 41 41 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 150 150 150 150 150 150 F873DB103(1)760(2) F873DB123(1)760(2) F873DB153(1)760(2) F873DB183(1)760(2) F873DB223(1)760(2) F873DB253(3)760(2) F873DI253(1)760(2) F873DI273(1)760(2) F873DI333(1)760(2) F873DI393(1)760(2) F873DH473(3)760(2) F873DJ473(1)760(2) F873DJ563(3)760(2) F873DM563(1)760(2) F873DO683(1)760(2) F873DO823(3)760(2) F873DP823(1)760(2) F873DP104(3)760(2) F873DU104(1)760(2) F873DU124(1)760(2) F873DY154(1)760(2) F873DY184(1)760(2) F873FB563(1)760(2) F873FB683(1)760(2) F873FB823(3)760(2) F873FC823(1)760(2) F873FC104(1)760(2) F873FH104(1)760(2) F873FC124(3)760(2) F873FH124(1)760(2) F873FH154(3)760(2) F873FI154(1)760(2) F873FI184(1)760(2) F873FI224(3)760(2) F873FN224(1)760(2) F873FQ224(1)760(2) F873FN254(3)760(2) F873FO254(1)760(2) F873FQ254(3)760(2) F873FR254(1)760(2) F873FO274(1)760(2) F873FR274(1)760(2) F873FT274(1)760(2) F873FO334(1)760(2) F873FR334(3)760(2) F873FS334(1)760(2) F873FT334(1)760(2) F873FO394(1)760(2) F873FS394(3)760(2) F873FY394(1)760(2) F873FY474(1)760(2) F873FY564(1)760(2) F873RB154(1)760(2) F873RB184(1)760(2) F873RB224(3)760(2) F873RV224(1)760(2) F873RF254(1)760(2) F873RV254(1)760(2) Size Code B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number (1) M = ±20%, K = ±10%. (2) Insert lead and packaging code. See table for available options. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 6 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Table 1 – Ratings & Part Number Reference cont'd Capacitance Value (µF) Size Code 0.27 0.27 0.33 0.33 0.33 0.33 0.39 0.39 0.47 0.47 0.47 0.56 0.68 0.68 0.82 0.82 1 1.2 1.5 1.8 Capacitance Value (µF) Maximum Dimensions in mm Lead Spacing (p) dV/dt (V/µs) Part Number B H L RF RV RF RH RV RW RC RW RC RD RW RD RD RP RO RP RO RO RU RU 13 24 13 15 24 24 16 24 16 19 24 19 19 21 24 21 24 24 30 30 24 15 24 26 15 19 28.5 19 28.5 32 19 32 32 38 44 38 44 44 45 45 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 F873RF274(1)760(2) F873RV274(1)760(2) F873RF334(3)760(2) F873RH334(1)760(2) F873RV334(3)760(2) F873RW334(1)760(2) F873RC394(1)760(2) F873RW394(1)760(2) F873RC474(3)760(2) F873RD474(1)760(2) F873RW474(3)760(2) F873RD564(1)760(2) F873RD684(3)760(2) F873RP684(1)760(2) F873RO824(1)760(2) F873RP824(3)760(2) F873RO105(1)760(2) F873RO125(1)760(2) F873RU155(1)760(2) F873RU185(3)760(2) Size Code B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number (1) M = ±20%, K = ±10%. (2) Insert lead and packaging code. See table for available options. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 7 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3s max 260°C 250 First wave Temperature (°C) Recommended Soldering Temperature Soldering iron bit temperature (deg C) 400 350 300 250 Second wave 200 Cooling ΔT <150°C Preheating 150 ca 2°C/s ca 3.5°C/s typical Tpreheat 100 ca 5°C/s 115°C max 100°C Typical 200 50 150 100 0 0 50 40 80 120 160 200 240 Time (s) 0 0 1 2 3 4 5 6 7 8 Soldering time (sec) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 8 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch ≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 9 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin FILM WINDING SCHEME OPTIONS Single-sided Metallized Polypropylene Film Double-sided Margin Metal Contact Layer Single-sided Metallized Polypropylene Film 1 Section Metal Contact Layer Margin Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Carrier Film Leads 2 Sections Polypropy Film Diele 1 Section Winding Scheme Single-sided Metallized Polypropylene Film Single-sided Metallized Polypropylene Film 3 Sections 4 Sections Metallized Impregnated Paper Metallized Polyphenylene Sulfide Film (SMR) Metallized Impregnated Paper Double-sided Metallized Polyester Carrier Film Polypropy Film Diele 3 Sections Polyp Metallized Polyphenylene Sulfide Film with Vacuum-Evaporated Aluminum Electrodes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, 1SC 29606 (864) 963-6300 • www.kemet.com Section 1 Section Metal Foil F3004_F873_X1_760 • 5/13/2015 1 Section Polypr Film D 10 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Marking FRONT TOP Approval Marks Passive Flammability Class Series & Safety Class Rated Voltage KEMET or KEC Manufacturing Date Code IEC Climatic Category Capacitance Capacitance Tolerance Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 11 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Packaging Quantities Size Code DB DI DH DJ DM DO DP DU DY FB FC FI FN FO FR FS FY FH FQ FT RB RF RH RC RD RP RO RU RV RW Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Pizza 22.5 6 7 8.0 8.5 9 10 11 13 15.5 14.5 16 16.0 17 18.5 18.5 20 22 24.5 26 26 26 26 26 26 26 26 26 1638 1188 1026 972 918 810 756 540 450 702 594 513 486 459 405 378 324 270 300 250 240 250 200 160 190 150 120 700 550 500 450 400 350 350 300 250 464 380 330 280 300 235 217 200 170 660 564 492 468 444 396 360 300 252 27.5 9.0 11.0 13.0 14.0 17.0 17.5 19.0 22.0 21.0 27.5 31.0 17.0 20.0 25.0 28.0 40.0 28.0 29.0 37.0 12.5 16.0 19.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 816 672 480 352 216 256 256 168 392 280 240 408 336 288 176 144 128 128 112 168 120 120 370 300 250 230 190 190 170 150 150 120 100 37.5 11.0 13.0 15.0 16.0 19.0 21.0 24.0 30.0 24.0 24.0 22.0 24.0 26.0 28.5 32.0 38.0 44.0 45.0 15.0 19.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 420 360 300 216 192 126 108 90 252 216 252 216 180 108 96 84 72 60 108 108 210 175 154 140 119 105 91 77 91 91 Lead Thickness Spacing (mm) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 12 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15 mm 0 0 Taping Specification Dimensions in mm Standard IEC 60286–2 Lead spacing +6/-0.1 F 5 7.5 10 15 22.5 27.5 Carrier tape width +1/-0.5 W 18 18 18 18 18 18 Hold-down tape width F 18 +1/-0.5 Minimum W0 6 6 9 10 10 10 Position of sprocket hole +/-0.5 W1 9 9 9 9 9 9 9+0.75/-0.5 Distance between tapes Maximum W2 3 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 4 Feed hole lead spacing +/-0.2 P0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 Distance lead – feed hole +/-0.7 P1 3.85 3.75 7.7 5.2 7.8 5.3 P1 Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Lateral deviation +/-2 ∆h 2 2 2 2 2 2 2 Total thickness +/-0.2 t 0.7 0.7 0.7 0.7 0.9 0.9 Sprocket hole/cap body +/-0.5 H0(2) 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 Deviation tape – plane (1) (3) MAX 18.5+/-0.5 MAX 18.5+/-0.5 0.9MAX 18+2/-0 (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (F ≥ 10 mm). © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 13 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series R4x,R4x+R,R7x,RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x,R4x+R,R7x,RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing Date Code (IEC–60062) H W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 14 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 15 Film Capacitors AC Line EMI Suppression and RC Networks – F873 Series Polypropylene Metallized Film, Class X1, 760 VAC Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3004_F873_X1_760 • 5/13/2015 16