1N4001 thru 1N4007 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge capability High temperature soldering guaranteed: 250oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: JEDEC DO-204AL (DO-41)/A-405, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: DO-41 - 0.012 ounce, 0.33 gram A-405 - 0.008 ounce, 0.23 gram Note: Lead diameter is 0.025(0.64)/0.021(0.53) for suffix “S” part numbers Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Parameter Symbols 1N 4001 1N 4002 1N 4003 1N 4004 Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 Maximum DC blocking voltage V DC 50 100 200 Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=50oC IF(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA=50oC IFSM 30.0 Amps Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TL=75oC IR(AV) 30 uA Maximum instantaneous forward voltage at 1.0A VF 1.1 Volts IR 5.0 50 uA trr 1.0 uS Maximum DC reverse current at rated DC blocking voltage TA=25oC TA=100oC Typical reverse recovery time at IFM=20mA, IRM=1mA (Note 2) Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range Notes: 1N 4005 1N 4006 1N 4007 Units 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts CJ 15 RθJA RθJL 50.0 25.0 TJ -55 to +125 o C TSTG -55 to +150 o C 1. Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 2. Measured on Tektronix type "S" recovery plug-in. Tektronix 545 scope or equivalent 49 pF o C/W RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 50