1N5400 thru 1N5408 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 3.0 Amperes Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High surge current capability Construction utilizes void-free molded plastic technique 3.0 Amperes operation at TL=90oC with no thermal runaway Typical IR less than 0.1uA High temperature soldering guaranteed: 250oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: JEDEC DO-201AD, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042 ounce, 1.19 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Symbols 1N 5400 1N 5401 1N 5402 1N 5403 1N 5404 1N 5405 Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 Maximum RMS voltage VRMS 35 70 140 210 280 Maximum DC blocking voltage to TA=150 C VDC 50 100 200 300 400 Maximum average forward rectified current 0.5" (12.5mm) lead length at TL=90oC IF(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=90oC IFSM 200.0 Amps Maximum full load reverse current full cycle average, 0.5" (12.5mm) lead length at TL=90oC IR(AV) 500 uA Maximum instantaneous forward voltage at 3.0A VF 1.2 Volts IR 10.0 500 uA Parameter o Maximum DC reverse current at rated DC blocking voltage TA=25oC TA=100oC Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Maximum DC blocking voltage temperature Operating junction temperature range Storage temperature range Notes: 1N 5406 1N 5407 1N 5408 Units 500 600 800 1000 Volts 350 420 560 700 Volts 500 600 800 1000 Volts CJ 30 RθJA 20.0 TA +125 o C TJ -55 to +125 o C TSTG -55 to +150 o C 1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted with 0.8” x 0.8” (20 x 20mm) copper heatsinks 63 pF o C/W RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 64