LBB127 Dual Single-Pole, Normally Closed OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 250 200 10 Units VP mArms / mADC Features • 3750Vrms Input/Output Isolation • Low Drive Power Requirements (TTL/CMOS Compatible) • High Reliability • Arc-Free With No Snubbing Circuits • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Small 8-Pin Package • Machine Insertable, Wave Solderable • Surface Mount Tape & Reel Versions Available Description LBB127 is a 250V, 200mA, 10 dual normally closed (1-Form-B) Solid State Relay that comprises two independently controlled, optically coupled MOSFET switches. It is provided in an 8-pin package, and employs optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. This dual single-pole OptoMOS relay provides a more compact design solution than discrete single-pole relays in a variety of applications, and saves board space by incorporating both switches in a single 8-pin package. Approvals Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part # LBB127 LBB127S LBB127STR LBB127P LBB127PTR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1,000/Reel) Pin Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Closed (Form B) Devices Form-B IF ILOAD Pb DS-LBB127-R05 90% 10% e3 toff www.ixysic.com ton 1 INTEGRATED CIRCUITS DIVISION LBB127 Absolute Maximum Ratings @ 25°C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms °C °C Derate linearly 1.33 mW / °C Derate linearly 6.67 mW / °C Electrical Characteristics @ 25°C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max Units t =10ms IL=200mA VL=250VP IL ILPK RON ILEAK - 8 - 200 ±400 10 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 50 5 5 - IL=200mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V A ms pF If both poles operate, then the load current must be derated so as not to exceed the package power dissipation value. www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LBB127 PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 25 25 20 15 10 5 20 15 10 5 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 0.03 Typical IF for Switch Operation (N=50, IL=200mA) 25 10 5 0.07 0.09 0.11 Turn-On Time (ms) 1.8 2.2 2.6 3.0 LED Current (mA) 5 1.05 1.35 1.60 1.95 20 15 10 5 0 3.4 1.0 Device Count (N) 0.75 Typical On-Resistance Distribution (N=50, IF=5mA, IL=200mA) 25 10 25 5 Turn-Off Time (ms) 0 1.4 10 0.45 15 0 15 0.13 20 Device Count (N) 15 0.05 Typical IF for Switch Dropout (N=50, IL=200mA) 25 20 20 0 0 0 Typical Turn-Off Time (N=50, IF=5mA, IL=200mA) 25 Device Count (N) Device Count (N) Device Count (N) 30 Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=200mA) Device Count (N) 35 Typical LED Forward Voltage Drop (N=50, IF=5mA) 1.4 1.8 2.2 2.6 LED Current (mA) 3.0 5.325 5.495 5.665 5.835 6.005 On-Resistance (:) 6.175 Typical Blocking Voltage Distribution (N=50, IF=5mA) 20 15 10 5 0 310 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 1.4 0.04 0.03 0.02 0.01 0.8 -20 0 20 40 60 Temperature (ºC) 80 100 120 1.2 1.0 0.8 0.6 0.4 0.2 0 0 -40 Typical Turn-Off Time vs. LED Forward Current (IL=200mA) 1.6 Turn-Off Time (ms) 1.6 0.05 Turn-On Time (ms) LED Forward Voltage Drop (V) 0.06 330 Typical Turn-On Time vs. LED Forward Current (IL=200mA) Typical LED Forward Voltage Drop vs. Temperature 1.8 314 318 322 326 Blocking Voltage (VP) 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBB127 PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 2.5 0.10 Turn-Off Time (ms) 0.08 0.06 0.04 0.02 0 -20 0 20 40 60 Temperature (ºC) 80 2.0 IF=5mA 1.5 IF=10mA 1.0 IF=20mA 0.5 100 200 150 100 4.0 4.0 -20 0 20 40 60 80 -40 100 LED Current (mA) 3.0 2.5 2.0 1.5 1.0 8 -40 -20 0 20 40 60 Temperature (ºC) 80 1.0 100 2 0 -40 -20 0 20 40 60 Temperature (ºC) 80 -40 100 Leakage (A) 0.035 Blocking Voltage (VP) 0.040 300 250 200 150 -0.4 0 0.4 0.8 0.015 0.005 -20 0 20 40 60 80 100 Temperature (ºC) Load Voltage (V) 60 0.020 0.010 -40 40 0.025 50 1.2 20 0.030 100 0 -0.8 0 Typical Leakage vs. Temperature Measured across Pins 5&6 or 7&8 0.045 -200 -1.2 -20 Temperature (ºC) 350 -150 100 3 400 -100 80 4 150 -50 120 5 200 0 100 6 Typical Blocking Voltage vs. Temperature (IF=5mA) 50 80 1 Typical Load Current vs. Load Voltage 100 60 7 1.5 0 40 Typical On-Resistance vs. Temperature (IF=5mA, IL=200mA) 2.0 0 20 Typical IF for Switch Dropout vs. Temperature (IL=200mA) 2.5 0.5 0 Temperature (ºC) 3.0 0.5 -20 Temperature (ºC) 3.5 3.5 50 0 -40 Typical IF for Switch Operation vs. Temperature (IL=200mA) 4.5 LED Current (mA) 250 0 -40 Load Current (mA) Maximum Load Current vs. Temperature On-Resistance (:) Turn-On Time (ms) 0.12 Typical Turn-Off Time vs. Temperature (IL=200mA) Load Current (mA) Typical Turn-On Time vs. Temperature (IF=5mA, IL=200mA) 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LBB127 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBB127 / LBB127S / LBB127P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBB127 / LBB127S 250ºC for 30 seconds LBB127P 260ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R05 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBB127 MECHANICAL DIMENSIONS LBB127 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 0.457 ± 0.076 (0.018 ± 0.003) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 ± 0.127 (0.300 ± 0.005) 0.254 ± 0.0127 (0.010 ± 0.0005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LBB127S 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LBB127P 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 ± 0.127 (0.370 ± 0.005) Pin 1 9.652 ± 0.381 (0.380 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 0.203 ± 0.013 (0.008 ± 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 ± 0.025 (0.085 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) 0.864 ± 0.120 (0.034 ± 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LBB127 MECHANICAL DIMENSIONS LBB127STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 LBB127PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LBB127-R05 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012