DATA SHEET Schottky Diode Quad Mixer Chips Supplied on Film Frame Applications 2 Double-balanced mixers 1 2 3 Features 1 Three barrier heights available 3 4 Schottky diodes supplied 100% tested, sawn, mounted on film frame 4 Low cost 200165C-001 Available lead (Pb)-free, RoHS-compliant, and Green TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Description The Skyworks SMS392x-099 family of Si Schottky diodes are configured as ring quads intended for use in double-balanced mixers. Each ring quad die is comprised of four Schottky junctions, connected anode to cathode. There are three barrier heights available: SMS3926 is composed of low-barrier diodes, which can be driven with low-power local oscillator signals SMS3927 is composed of medium-barrier diodes, for applications in which moderate-power local oscillator signals are available SMS3928 is composed of high-barrier diodes for applications that require very low distortion performance and have higher local oscillator power available. These ring quads are 100% tested, sawn, and supplied on film frame in wafer quantities. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200165D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 1 DATA SHEET • SCHOTTKY DIODE QUAD MIXER CHIPS SUPPLIED ON FILM FRAME Electrical and Mechanical Specifications The absolute maximum ratings of the Schotty Diode Quad Mixer Chips are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics are shown in Figures 2, 3, and 4. SPICE model parameters are shown in Table 5. Figure 5 shows the outline drawing of the Schotty Diode Quad Mixer Chips, and Figure 6 shows the wafer on film. The chip dimensions of the different Schotty Diode Quad Mixer Chips are shown in Table 4. Table 2. Schotty Diode Quad Mixer Chips Absolute Maximum Ratings1 Parameter Maximum Forward current (IF) Units 75 mA V 75 mW per junction V Storage temperature –65 °C to +200 °C dBm Operating temperature –65 °C to +150 °C V < 250 V Power dissipation @ 25 °C at the base of the chip Electrostatic discharge, Human Body Model 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times. Table 3. Schotty Diode Quad Mixer Chip Electrical Specifications at 25 °C Part Number Min. VB(1) IR = 10 μA (V) CJ VR = 0 V F = 1 MHz (pF) VF @ IF = 1mA (mV) Max. Delta VF @ 1 mA (mV) Max. RT IF = 10 mA (Ω) SMS3926-099 2 0.3 to 0.5 pF 200 to 260 10 8 SMS3927-099 3 0.3 to 0.5 pF 300 to 400 10 8 SMS3928-099 4 0.3 to 0.5 pF 500 to 600 10 8 Table 4. Schotty Diode Quad Mixer Chip Dimensions Quantity of Good Diodes per Wafer Chip Size Nominal (inches) Chip Height Nominal (inches) Min Nom Bonding Pad Nominal (inches) SMS3926-099 18,000 21,000 0.0035 ± 0.0005 0.0190 ± 0.001 0.006 ± 0.001 SMS3927-099 24,000 27,000 0.0035 ± 0.0005 0.0150 ± 0.001 0.006 ± 0.001 SMS3928-099 23,000 26,000 0.0035 ± 0.0005 0.0150 ± 0.001 0.006 ± 0.001 Part Number Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 April 25, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200165D DATA SHEET • SCHOTTKY DIODE QUAD MIXER CHIPS SUPPLIED ON FILM FRAME 10 8 8 4 0 200 200165C-002 2 250 300 350 400 6 4 200165C-003 6 Forward Current (mA) 10 2 0 300 350 400 450 Forward Voltage (mV) Forward Voltage (mV) Figure 3. SMS3927 DC Characteristics Figure 2. SMS3926 DC Characteristics 10 8 6 4 200165C-004 Forward Current (mA) Forward Current (mA) Typical Performance Data at 25 °C 2 0 500 550 600 650 Forward Voltage (mV) 700 Figure 4. SMS3928 DC Characteristics Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200165D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 25, 2016 3 DATA SHEET • SCHOTTKY DIODE QUAD MIXER CHIPS SUPPLIED ON FILM FRAME Table 5. SPICE Model Parameters (Per Junction) Parameter Units SMS3926 SMS3927 SMS3928 IS A 2.5E-07 1.3E-09 9.0E-13 RS 4.00 4.00 4.00 N - 1.04 1.04 1.04 TT s 1E-11 1E-11 1E-11 CJ0 pF 0.42 0.39 0.39 M - 0.32 0.37 0.42 EG eV 0.69 0.69 0.69 XTI - 2.00 2.00 2.00 FC - 0.50 0.50 0.50 BV V 2.00 3.00 4.00 IBV A 1.0E-05 1.0E-05 1.0E-05 VJ V 0.495 0.595 0.800 2 1 3 0.015 (0.381 mm) ± 0.001 (0.025 mm) (Note 1) 2 4 Schematic 1 0.0035 (0.089 mm) x 0.0035 (0.089 mm) 4 Places 3 0.015 (0.381 mm) ± 0.001 (0.025 mm) (Note 1) 4 0.006 (0.18 mm) ± 0.001 (0.025 mm) 200165C-005 Note 1: The SMS3926 die size is 0.019 (0.483 mm) ± 0.001 (0.025 mm) (2 places). Figure 5. Schottky Diode Quad Mixer Chips Outline Drawing Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 April 25, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200165D DATA SHEET • SCHOTTKY DIODE QUAD MIXER CHIPS SUPPLIED ON FILM FRAME 0.003 (0.076 mm) Nom. Separation Between Die 0.003 (0.076 mm) Separation Between Die 5.981 (151.92 mm) Outer Ring O.D. 5.520 (140.20 mm) Inner Ring I.D. 3.940 (100.0 mm) Wafer Dia. Grip Ring 0.236 (5.99 mm) Ring Thickness Wafer Film Frame Description: Wafer on nitto tape Color: light blue Thickness: 2.2 to 3.0 mils Tensile strength: 6.6 (lbs. in width) Ring material: plastic 200165C-006 Figure 6. Wafer on Film Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200165D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 25, 2016 5 DATA SHEET • SCHOTTKY DIODE QUAD MIXER CHIPS SUPPLIED ON FILM FRAME Ordering Information Model Name Schotty Diode Quad Mixer Chips Manufacturing Part Number SMS3926-099 SMS3927-099 SMS3928-099 Copyright © 2002-2006, 2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 April 25, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200165D