CPC3902

CPC3902
250V N-Channel
Depletion-Mode FET
INTEGRATED CIRCUITS DIVISION
BVDSX/
BVDGX
250V
RDS(on)
(max)
2.5
IDSS (min)
Package
400mA
SOT-89, SOT-223
Features
•
•
•
•
•
High Breakdown Voltage: 250V
On-Resistance: 2.5 max. at 25ºC
Low VGS(off) Voltage: -1.4 to -3.1V
High Input Impedance
Small Package Sizes: SOT-89, SOT-223
Applications
•
•
•
•
•
•
Current Regulator
Normally-On Switches
Solid State Relays
Converters
Telecommunications
Power Supply
Description
The CPC3902 is a 250V, N-channel, depletion-mode,
metal oxide semiconductor field effect transistor
(MOSFET) built upon a proprietary third generation
vertical DMOS process that realizes world-class,
high voltage performance in an economical silicon
gate process. This vertical DMOS process yields a
robust device with high input impedance for power
applications.
As with all MOS devices, the FET structure prevents
thermal runaway and thermal-induced secondary
breakdown, which makes the CPC3902 ideal for use
in high-power applications.
The CPC3902 is a highly reliable FET device that
has been used extensively in IXYS Integrated Circuits
Division’s Solid State Relays for industrial and
telecommunications applications.
The CPC3902 is available in the SOT-89 and the
SOT-223 package.
Package Pinout
Ordering Information
D
1
4
2
3
G
D
S
Part #
CPC3902ZTR
CPC3902CTR
Description
SOT-223: Tape and Reel (1000/Reel)
SOT-89: Tape and Reel (1000/Reel)
Circuit Symbol
D
G
S
DS-CPC3902-R03
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
CPC3902
Absolute Maximum Ratings @ 25ºC
Parameter
Drain-to-Source Voltage
Gate-to-Source Voltage
Pulsed Drain Current
Total Package Dissipation 1
Operational Temperature
Junction Temperature, Maximum
Storage Temperature
1
Ratings
250
±15
400
1.8
-55 to +110
+125
-55 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
V
V
mA
W
ºC
ºC
ºC
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Mounted on 1"x1" 2 oz. Copper FR4 board.
Thermal Characteristics
Device
CPC3902C (SOT-89)
Parameter
Junction to Case
Junction to Ambient
CPC3902Z (SOT-223) Junction to Case
Junction to Ambient
Symbol
JC
Rating
50
JA
90
JC
14
JA
55
Units
ºC/W
Electrical Characteristics @ 25ºC (Unless Otherwise Noted)
Symbol
Conditions
Drain-to-Source Breakdown Voltage
BVDSX
VGS= -5.5V, ID=100µA
250
-
-
V
Gate-to-Source Off Voltage
VGS(off)
VDS= 15V, ID=1A
-1.4
-
-3.1
V
dVGS(off) /dT
VDS= 15V, ID=1A
-
-
4.5
mV/ºC
Gate Body Leakage Current
IGSS
VGS=±15V, VDS=0V
-
-
100
nA
Drain-to-Source Leakage Current
ID(off)
VGS= -5.5V, VDS=250V
-
-
1
µA
IDSS
VGS= 0V, VDS=15V
400
-
-
mA
-
-
2.5

-
-
2.5
%/ºC
400
-
-
m
-
pF
1
V
Change in VGS(off) with Temperature
Saturated Drain-to-Source Current
Static Drain-to-Source On-State Resistance
Change in RDS(on) with Temperature
RDS(on)
dRDS(on) /dT
VGS= 0V, ID=300mA, VDS=10V
Forward Transconductance
Gfs
ID= 200mA, VDS = 10V
Input Capacitance
CISS
VGS= -3.5V
Common Source Output Capacitance
COSS
VDS= 20V
Reverse Transfer Capacitance
CRSS
f= 1MHz
Source-Drain Diode Voltage Drop
VSD
VGS= -5V, ISD=150mA
2
www.ixysic.com
Min
Typ
Max
Units

Parameter
230
-
16
-
0.72
9.5
R03
INTEGRATED CIRCUITS DIVISION
CPC3902
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
1.2
0.0
1.0
-0.5
TA= 105ºC
TA= 25ºC
TA= -40ºC
1.0
Gm (S)
-1.5
-2.0
0.2
-2.5
0.0
-2.5
-3.0
-50
-1.5
-1.0
VGS (V)
-0.5
0.0
Forward Safe Operating Bias
(VGS=0V, DC Load)
0.2
-25
0
25
50
75
Temperature (ºC)
100
0.0
0.0
125
0.8
ID (A)
0.01
0.6
0.2
400
100
0
1
2
3
VDS (V)
4
5
CISS
COSS
CRSS
150
100
1.5
1.0
-50
-25
4
TA=105ºC
3
TA=25ºC
2
TA=-40ºC
1
0
25
50
75
Temperature (ºC)
100
125
100
125
Blocking Voltage
(VGS=-5V, IL=10PA)
330
Blocking Voltage (VP)
On-Resistance (:)
Capacitance (pF)
200
0.7
2.0
On-Resistance vs. Drain Current
(VGS=0V)
5
250
0.6
2.5
6
350
300
0.5
0.0
1000
Capacitance vs. Drain-Source Voltage
(VGS=-3.5V)
0.3
0.4
ID (mA)
0.5
0.0
10
Voltage (V)
0.2
3.0
0.4
0.001
0.1
On-Resistance vs. Temperature
(VGS=0V, ID=300mA)
3.5
VGS=0V
VGS=-0.5V
VGS=-1V
VGS=-1.5V
VGS=-2V
1.0
Limited by
device RON
1
0.6
0.4
1.2
0.1
TA=-40ºC
TA=25ºC
TA=105ºC
0.8
Output Characteristics
Limited by
channel saturation
0.1
Transconductance vs. Drain Current
(VDS=10V)
1.2
0.4
-2.0
1.4
-1.0
0.6
1
Current (A)
Threshold Voltage
(IDS=1PA)
On-Resistance (:)
0.8
VGS (V)
ID (mA)
Instantaneous Transfer Characteristics
(VDS=10V)
320
310
300
290
50
0
0
0
5
10
15
20
VDS (V)
25
30
0.0
35
Leakage Current (PA)
0.035
0.2
0.4
0.6
ID (mA)
0.8
1.0
280
-50
-25
0
25
50
75
Temperature (ºC)
Leakage Current vs. Temperature
(VGS=-5V, VDS=250V)
0.030
0.025
0.020
0.015
0.010
0.005
0.000
-50
-25
0
25
50
75
Temperature (ºC)
100
125
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC3902
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC3902C, CPC3902Z
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC3902C, CPC3902Z
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable, and the use of a short drying bake may be necessary. Chlorine-based or
Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be
used.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
CPC3902
Mechanical Dimensions
CPC3902Z
2.90 / 3.10
(0.114 / 0.122)
PCB Land Pattern
0.229 / 0.330
(0.009 / 0.013)
1.90
(0.075)
6.705 / 7.290
(0.264 / 0.287)
3.30 / 3.71
(0.130 / 0.146)
1.499 / 1.981
(0.059 / 0.078)
3.20
(0.126)
6.10
(0.24)
Pin 1
0.610 / 0.787
(0.024 / 0.031)
1.90
(0.075)
0.914 MIN
(0.036 MIN)
2.286
(0.090)
6.30 / 6.71
(0.248 / 0.264)
0.020 / 0.102
(0.0008 / 0.004)
0.864 / 1.067
(0.034 / 0.042)
0.90
(0.035)
1.549 / 1.803
(0.061 / 0.071)
2.286
(0.090)
Dimensions
mm MIN / mm MAX
(inches MIN / inches MAX)
4.597
(0.181)
CPC3902ZTR Tape & Reel
177.8 Dia
(7.00 Dia)
5.50 ± 0.05
(0.217 ± 0.002)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 ± 0.1
(0.157 ± 0.004)
W=12.08 ± 0.2
(0.476 ± 0.008)
B0=7.42 ± 0.1
(0.292 ± 0.004)
K0=1.88 ± 0.1
(0.074 ± 0.004)
Embossed
Carrier
A0=6.83 ± 0.1
(0.269 ± 0.004)
P=8.03 ± 0.1
(0.316 ± 0.004)
Embossment
R03
1.75 ± 0.1
(0.069 ± 0.004)
www.ixysic.com
Dimensions
mm
(inches)
5
INTEGRATED CIRCUITS DIVISION
CPC3902
CPC3902C
1.626 / 1.829
(0.064 / 0.072)
1.397 / 1.600
(0.055 / 0.063)
R 0.254
(R 0.010)
PCB Land Pattern
1.90
(0.075)
3.937 / 4.242
(0.155 / 0.167)
45º
2.286 / 2.591
(0.090 / 0.102)
2.45
(0.096)
1.40
(0.055)
Pin 1
0.889 / 1.194
(0.035 / 0.047)
0.356 / 0.483
(0.014 / 0.019)
0.432 / 0.559
(0.017 / 0.022)
50º
0.356 / 0.432
(0.014 / 0.017)
0.864 / 1.016
(0.034 / 0.040)
4.394 / 4.597
(0.173 / 0.181)
1.118 / 1.270
(0.044 / 0.050)
50º
5.00
(0.197)
1.90
(0.074)
0.432 / 0.508
(0.017 / 0.020)
0.60
(0.024)
TYP 3
2.845 / 2.997
(0.112 / 0.118)
1.422 / 1.575
(0.056 / 0.062)
2.921 / 3.073
(0.115 / 0.121)
Dimensions
mm MIN / mm MAX
(inches MIN / inches MAX)
CPC3902CTR Tape & Reel
177.8 Dia
(7.00 Dia)
5.50 ± 0.05
(0.217 ± 0.002)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
1.75 ± 0.1
(0.069 ± 0.004)
W=12.00 ± 0.3
(0.472 ± 0.012)
B0=4.60 ± 0.1
(0.181 ± 0.004)
K0=1.80 ± 0.1
(0.071 ± 0.004)
Embossed
Carrier
2.00 ± 0.05
(0.079 ± 0.002)
4.00 ± 0.1
(0.157 ± 0.004)
A0=4.80 ± 0.1
(0.189 ± 0.004)
P=8.00 ± 0.1
(0.315 ± 0.004)
Embossment
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC3902-R03
©Copyright 2015, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
4/10/2015